Sharp AR-M700 (serv.man27) Service Manual ▷ View online
AR-M550/M620/M700 SIMULATION 8 - 61
(Copy condition setting in this simulation)
To select paper (paper feed tray), perform the following procedures.
1) Enter 0 with 10-key.
2) Press [START] key. (The mode is changed to the paper feed tray
selection mode.)
3) Enter the number corresponding to the paper feed tray to be used
with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
NOTE: When [P] key is pressed after entering an adjustment value in
this simulation, the adjustment value is set. When START key
is pressed, the adjustment value is set and copying is per-
formed.
is pressed, the adjustment value is set and copying is per-
formed.
• "Set value - 128" is added to the shading adjustment value (SIM 46-
17).
Operation/Procedure
1) Select "SCANNER EXP. LEVEL" with 10-key.
2) Press [START] key.
3) Enter the image density adjustment value.
4) Press [P] key or [START] key.
NOTE: When this simulation is performed to adjust the scan image
densities, all the image densities in all the scan modes are
changed to the image density level set with this simulation.
changed to the image density level set with this simulation.
That is, the image densities set with SIM 46-22, 23, 24, 25, and
45 are changed to the image density level set with this simula-
tion.
45 are changed to the image density level set with this simula-
tion.
NOTE: Only the set value is changed and no printing is performed.
Operation/Procedure
1) Select the number corresponding to one of the following adjust-
ment items with 10-key. (Select one of 0 - 5.)
∗
Normal mode (Image density adjustment level)
∗
Auto mode
2) Press [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [CUSTOM SETTINGS] key.
The adjustment value is set.
NOTE: Only the set value is changed and no printing is performed.
Item
Content
Set
range
Default
0
TRAY SELECT
Paper feed tray selection
1: TRAY1
2: TRAY2
3: TRAY3
4: TRAY4
5: Manual feed
6: Side LCC
1: TRAY1
2: TRAY2
3: TRAY3
4: TRAY4
5: Manual feed
6: Side LCC
–
–
1
PRINT START
Print start (Default)
–
–
2
EXP LEVEL
Exposure level selection
3: Exposure level 1.0
4: Exposure level 1.5
5: Exposure level 2.0
6: Exposure level 2.5
7: Exposure level 3.0
8: Exposure level 3.5
9: Exposure level 4.0
10: Exposure level 4.5
11: Exposure level 5.0
3: Exposure level 1.0
4: Exposure level 1.5
5: Exposure level 2.0
6: Exposure level 2.5
7: Exposure level 3.0
8: Exposure level 3.5
9: Exposure level 4.0
10: Exposure level 4.5
11: Exposure level 5.0
–
–
3
SPF (FRONT)
SPF (front) (front frame side) 0 - 255
128
4
SPF (REAR)
SPF (front) (rear frame side)
5
DSPF
DSPF (Back surface)
SIMULATION 46-20
1
Press [CUSTOM SETTINGS] key.
SIMULATION 46-20
OC/SPF EXP. ADJUSTMENT. INPUT VALUE 0-255, AND PRESS
START.
1.SPF(FRONT)
128
Press [START] key.
SIMULATION 46-20
OC/SPF EXP. ADJUSTMENT. NOW PRINTING.
Press [CUSTOM SETTINGS] key,
or terminate copying.
or terminate copying.
SIMULATION 46-20
OC/SPF EXP. ADJUSTMENT. SELECT 1-6, AND PRESS START.
(FEED TRAY)
2.TRAY1 2.TRAY2 3.TRAY3 4.TRAY4
5.BPT 6.LCC
Press [START] key or
press [CUSTOM SETTINGS] key.
press [CUSTOM SETTINGS] key.
1
Select 0, and
press [START] key.
press [START] key.
Select 1,
and press
[START] key.
and press
[START] key.
SIMULATION 46-20
OC/SPF EXP. ADJUSTMENT. SELECT 3-8, AND PRESS START.
(EXP. LEVEL SELECT)
3.1.0 4.1.5 5.2.0
6.2.5 7.3.0 8.3.5
9.4.0 10.4.5 11.5.0
(EXP. LEVEL SELECT)
3.1.0 4.1.5 5.2.0
6.2.5 7.3.0 8.3.5
9.4.0 10.4.5 11.5.0
1
Press [START] key or
press [CUSTOM SETTINGS] key.
press [CUSTOM SETTINGS] key.
Select 2, and
press [START] key.
press [START] key.
OC/SPF EXP. ADJUSTMENT. SELECT 1-4, AND PRESS START.
0.TRAY SELECT
0.TRAY SELECT
1
1.PRINT START
2.EXP LEVEL
1
3.SPF(FRONT)
128
4.SPF(REAR)
128
5.DSPF
128
Select other than 0 - 2, and press [START] key.
46-21
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the scanner exposure level in all the
scanner modes.
scanner modes.
Section
Item
Picture quality
Density
Item
Set
range
Default
0
SCANNER EXP. LEVEL
Image density level
0 - 99
50
Press [START] key.
Press [START] key, or
press [CUSTOM SETTINGS] key.
press [CUSTOM SETTINGS] key.
46-22
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the scanner exposure level in the
normal text mode.
normal text mode.
Section
Item
Item
Picture quality
Density
Item
Set
range
Default
0
AUTO
Auto
0 - 99
50
1
1.0
Exposure level 1
2
2.0
Exposure level 2
3
3.0
Exposure level 3
4
4.0
Exposure level 4
5
5.0
Exposure level 5
0
SIMULATION 46-21
EXP.LEVEL SETUP SCANNER(AUTO SET), PRESS START.
0.SCANNER EXP.LEVEL
50
50
SIMULATION 46-21
EXP.LEVEL SETUP SCANNER(AUTO SET), INPUT VALUE 0-99,
AND PRESS START.
0.SCANNER EXP.LEVEL
AR-M550/M620/M700 SIMULATION 8 - 62
Operation/Procedure
1) Select the number corresponding to one of the following adjust-
ment items with 10-key. (Select one of 0 - 11.)
∗
Normal mode (Image density adjustment level)
∗
Normal mode (Image density adjustment level) (Half-tone mode)
∗
Auto mode
∗
Auto mode (Half-tone mode)
2) Press [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
NOTE: Only the set value is changed and no printing is performed.
Operation/Procedure
1) Select the number corresponding to one of the following adjust-
ment items with 10-key. (Select one of 0 - 11.)
∗
Normal mode (Image density adjustment level)
∗
Normal mode (Image density adjustment level) (Half-tone mode)
∗
Auto mode
∗
Auto mode (Half-tone mode)
2) Press [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
NOTE: Only the set value is changed and no printing is performed.
Operation/Procedure
1) Select the number corresponding to one of the following adjust-
ment items with 10-key. (Select one of 0 - 11.)
∗
Normal mode (Image density adjustment level)
∗
Normal mode (Image density adjustment level) (Half-tone mode)
∗
Auto mode
∗
Auto mode (Half-tone mode)
Select other than 0 - 5, and
press [START] key.
press [START] key.
Press [START] key, or press
[CUSTOM SETTINGS] key.
[CUSTOM SETTINGS] key.
46-23
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the scanner exposure level in the fine
text mode.
text mode.
Section
Item
Picture quality
Density
Item
Set
range
Default
0
AUTO
Auto
0 - 99
50
1
1.0
Exposure level 1
2
2.0
Exposure level 2
3
3.0
Exposure level 3
4
4.0
Exposure level 4
5
5.0
Exposure level 5
6
AUTO (H)
Auto (Half-tone)
7
1.0 (H)
Exposure level 1 (Half-tone)
8
2.0 (H)
Exposure level 2 (Half-tone)
9
3.0 (H)
Exposure level 3 (Half-tone)
10
4.0 (H)
Exposure level 4 (Half-tone)
11
5.0 (H)
Exposure level 5 (Half-tone)
Select other than 0 - 11, and
press [START] key.
press [START] key.
Press [START] key, or
press [CUSTOM SETTINGS] key.
press [CUSTOM SETTINGS] key.
1
SIMULATION 46-22
EXP.LEVEL SETUP SCANNER(NORMAL). SELECT 0-5, AND PRESS
START.
0.AUTO
50
1.1.0
50
2.2.0
50
3.3.0
50
4.4.0
50
5.5.0
50
50
SIMULATION 46-22
EXP.LEVEL SETUP SCANNER(NORMAL), INPUT VALUE 0-99, AND
PRESS START.
0.AUTO
1
SIMULATION 46-23
EXP.LEVEL SETUP SCANNER(FINE). SELECT 0-11,AND PRESS
START.
0.AUTO
50
1.1.0
50
2.2.0
50
3.3.0
50
4.4.0
50
5.5.0
50
6.AUTO(H)
50
7.1.0(H)
50
8.2.0(H)
50
9.3.0(H)
50
10.4.0(H)
50
11.5.0(H)
50
50
SIMULATION 46-23
EXP.LEVEL SETUP SCANNER(FINE). INPUT VALUE 0-99, AND
PRESS START.
0.AUTO
46-24
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the scanner exposure level (in the
super fine text mode).
super fine text mode).
Section
Item
Picture quality
Density
Item
Set
range
Default
0
AUTO
Auto
0 - 99
50
1
1.0
Exposure level 1
2
2.0
Exposure level 2
3
3.0
Exposure level 3
4
4.0
Exposure level 4
5
5.0
Exposure level 5
6
AUTO (H)
Auto (Half-tone)
7
1.0 (H)
Exposure level 1 (Half-tone)
8
2.0 (H)
Exposure level 2 (Half-tone)
9
3.0 (H)
Exposure level 3 (Half-tone)
10
4.0 (H)
Exposure level 4 (Half-tone)
11
5.0 (H)
Exposure level 5 (Half-tone)
Select other than 0 - 11, and
press [START] key.
press [START] key.
Press [START] key, or
press [CUSTOM SETTINGS] key.
press [CUSTOM SETTINGS] key.
46-25
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the scanner exposure level in the ultra
fine text mode.
fine text mode.
Section
Item
Item
Picture quality
Density
1
SIMULATION 46-24
EXP.LEVEL SETUP SCANNER(SUPER FINE). SELECT 0-11,AND
PRESS START.
0.AUTO
50
1.1.0
50
2.2.0
50
3.3.0
50
4.4.0
50
5.5.0
50
6.AUTO(H)
50
7.1.0(H)
50
8.2.0(H)
50
9.3.0(H)
50
10.4.0(H)
50
11.5.0(H)
50
50
SIMULATION 46-24
EXP.LEVEL SETUP SCANNER(SUPER FINE). INPUT VALUE 0-99,
AND PRESS START.
0.AUTO
: Feb. 9 2004
1
AR-M550/M620/M700 SIMULATION 8 - 63
2) Press [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
NOTE: Only the set value is changed and no printing is performed.
Operation/Procedure
(Scanner mode selection)
1) Select the number corresponding to the scanner mode to be
adjusted with 10-key. (Select one of 1 - 9.)
2) Press [START] key.
(Gamma adjustment)
1) Enter the gamma level with 10-key.
2) Press [START] key.
The greater the adjustment value is, the greater the gamma is, result-
ing in a higher contrast.
ing in a higher contrast.
Operation/Procedure
(Copy mode selection)
1) Select the number corresponding to the copy mode to be adjusted
with 10-key. (Select one of 1 - 16.)
2) Press [START] key.
(Sharpness adjustment)
1) Enter the sharpness level with 10-key.
2) Press [START] key.
The greater the adjustment value is, the greater the sharpness is.
∗
SPF1: DSPF front surface (CCD)
∗
SPF2: DSPF back surface (CCD)
Item
Set
range
Default
0
AUTO
Auto
0 - 99
50
1
1.0
Exposure level 1
2
2.0
Exposure level 2
3
3.0
Exposure level 3
4
4.0
Exposure level 4
5
5.0
Exposure level 5
6
AUTO (H)
Auto (Half-tone)
7
1.0 (H)
Exposure level 1 (Half-tone)
8
2.0 (H)
Exposure level 2 (Half-tone)
9
3.0 (H)
Exposure level 3 (Half-tone)
10
4.0 (H)
Exposure level 4 (Half-tone)
11
5.0 (H)
Exposure level 5 (Half-tone)
Select other than 0 - 11, and
press [START] key.
press [START] key.
Press [START] key, or
press [CUSTOM SETTINGS] key.
press [CUSTOM SETTINGS] key.
46-27
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the gamma (density gradient) of the
network scanner mode.
network scanner mode.
Section
Item
Picture quality
Item
Set
range
Default
1
OC_Fine.HT
Fine text (Half-tone) (OC)
0 - 127
64
2
OC_SFine.HT
Super fine (Half-tone) (OC)
3
OC_UFine.HT
Ultra fine (Half-tone) (OC)
4
SPF_Fine.HT
Fine text (Half-tone) (SPF)
5
SPF_SFine.HT
Super fine (Half-tone) (SPF)
6
SPF_UFine.HT
Ultra fine (Half-tone) (SPF)
7
CIS_Fine.HT
Fine text (Half-tone) (CIS)
8
CIS_SFine.HT
Super fine (Half-tone) (CIS)
9
CIS_UFine.HT
Ultra fine (Half-tone) (CIS)
SIMULATION 46-25
EXP.LEVEL SETUP SCANNER(ULTRA FINE). SELECT 0-11,AND
PRESS START.
0.AUTO
50
1.1.0
50
2.2.0
50
3.3.0
50
4.4.0
50
5.5.0
50
6.AUTO(H)
50
7.1.0(H)
50
8.2.0(H)
50
9.3.0(H)
50
10.4.0(H)
50
11.5.0(H)
50
50
SIMULATION 46-25
EXP.LEVEL SETUP SCANNER(ULTRA FINE). INPUT VALUE 0-99,
AND PRESS START.
0.AUTO
46-31
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust sharpness of the copy mode.
Section
Item
Picture quality
Item
Set
range
Default
1
OC_AE
AE mode (OC)
1 - 5
3
2
OC_CHARA
Text mode (OC)
3
OC_MIX
Text/Photo mode (OC)
4
OC_PHOTO
Photo mode (OC)
5
SPF1_AE
AE mode (SPF1)
6
SPF1_CHARA
Text mode (SPF1)
7
SPF1_MIX
Text/Photo mode (SPF1)
8
SPF1_PHOTO
Photo mode (SPF1)
9
SPF2_AE
AE mode (SPF2)
10
SPF2_CHARA
Text mode (SPF2)
11
SPF2_MIX
Text/Photo mode (SPF2)
12
SPF2_PHOTO
Photo mode (SPF2)
13
CIS_AE
AE mode (CIS)
14
CIS_CHARA
Text mode (CIS)
4
15
CIS_MIX
Text/Photo mode (CIS)
3
16
CIS_PHOTO
Photo mode (CIS)
Press [START] key.
Press [CUSTOM SETTINGS] key.
SIMULATION 46-27
GAMMA SETUP(SCNNER), SELECT 1-9, AND PRESS START.
1.OC_Fine.HT
64
2.OC_SFine.HT
64
3.OC_UFine.HT
64
4.SPF_Fine.HT
64
5.SPF_SFine.HT
64
6.SPF_UFine.HT
64
7.CIS_Fine.HT
64
8.CIS_SFine.HT
64
9.CIS_UFine.HT
64
1
SIMULATION 46-31
SHARPNESS LEVEL SETUP. SELECT 1-12, AND PRESS START.
1.OC_AE
3
2.OC_CHARA
3
3.OC_MIX
3
4.OC_PHOTO
3
5.SPF1_AE
3
6.SPF1_CHARA
3
7.SPF1_MIX
3
8.SPF1_PHOTO
3
9.SPF2_AE
3
10.SPF2_CHARA
3
11.SPF2_MIX
3
12.SPF2_PHOTO
3
13.CIS_AE
3
14.CIS_CHARA
4
15.CIS_MIX
3
16.CIS_PHOTO
3
1
SIMULATION 46-31
SHARPNESS LEVEL SETUP. INPUT VALUE 0-3, AND PRESS
START.
1.OC_AE
: Feb. 9 2004
1
AR-M550/M620/M700 SIMULATION 8 - 64
Operation/Procedure
1) Enter the sharpness level with 10-key.
2) Press [START] key.
The greater the adjustment value is, the greater the sharpness is.
Default: 3 (Normal), 1 (Halftone)
Operation/Procedure
1) Select the number corresponding to one of the following adjust-
ment items with 10-key. (Select one of 0 - 11.)
∗
Normal mode (Image density adjustment level)
∗
Normal mode (Image density adjustment level) (Half-tone mode)
∗
Auto mode
∗
Auto mode (Half-tone mode)
2) Press [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
Operation/Procedure
(Adjustment mode selection)
1) Select the number corresponding to the copy mode to be adjusted
with 10-key. (Select one of 3 - 7.)
2) Press [START] key.
(Copy magnification ratio adjustment)
1) Select the number corresponding to the copy magnification ratio
adjustment mode to be adjusted with 10-key. (Select one of 3 - 7.)
2) Press [START] key.
3) Enter the copy magnification ratio adjustment value with 10-key.
4) Press [P] key or [START] key.
When the [START] key is pressed, copying is performed and the
adjustment value is set simultaneously.
adjustment value is set simultaneously.
The copy magnification ratio in the sub scan direction can be
adjusted by changing the scan speed (motor RPM).
adjusted by changing the scan speed (motor RPM).
46-39
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust sharpness of the FAX mode.
Section
Item
Picture quality
Press [START] key.
Press [CUSTOM SETTINGS] key.
46-45
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the image density in the FAX mode
(600dpi).
(600dpi).
Section
Item
Picture quality
Item
Set
range
Default
0
AUTO
Auto
0 - 99
50
1
1.0
Exposure level 1
2
2.0
Exposure level 2
3
3.0
Exposure level 3
4
4.0
Exposure level 4
5
5.0
Exposure level 5
6
AUTO (H)
Auto (Half-tone)
7
1.0 (H)
Exposure level 1 (Half-tone)
8
2.0 (H)
Exposure level 2 (Half-tone)
9
3.0 (H)
Exposure level 3 (Half-tone)
10
4.0 (H)
Exposure level 4 (Half-tone)
11
5.0 (H)
Exposure level 5 (Half-tone)
1
SIMULATION 46-39
FAX SHARPNESS LEVEL SETUP. SELECT 1-12, AND PRESS
START.
1:OC_NORMAL
FAX SHARPNESS LEVEL SETUP. SELECT 1-12, AND PRESS
START.
1:OC_NORMAL
3
2:OC_FINE
3
3:OC_FINE(H)
1
4:OC_SFINE
3
5:OC_SFINE(H)
1
6:OC_UFINE
3
7:OC_UFINE(H)
1
8:OC_600
3
9:OC_600(H)
3
10:SPF1_NORMAL
3
11:SPF1_FINE
3
12:SPF1_FINE(H)
1
13:SPF1_SFINE
3
14:SPF1_SFINE(H)
1
15:SPF1_UFINE
3
16:SPF1_UFINE(H)
1
17:SPF1_600
3
18:SPF1_600(H)
1
19:SPF2_NORMAL
3
20:SPF2_FINE
3
21:SPF2_FINE(H)
1
22:SPF2_SFINE
3
23:SPF2_SFINE(H)
1
24:SPF2_UFINE
3
25:SPF2_UFINE(H)
1
26:SPF2_600
3
27:SPF2_600(H)
1
28:CIS_NORMAL
3
29:CIS_FINE
3
30:CIS_FINE(H)
1
31:CIS_SFINE
3
32:CIS_SFINE(H)
1
33:CIS_UFINE
3
34:CIS_UFINE(H)
1
35:CIS_600
3
36:CIS_600(H)
1
SIMULATION 46-39
FAX SHARPNESS LEVEL SETUP. INPUT VALUE 1-3, AND PRESS
START.
1:OC_NORMAL
Press [START] key.
Press [CUSTOM SETTINGS] key.
48
48-1
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the copy magnification ratio (in the main
scanning and the sub scanning directions).
scanning and the sub scanning directions).
Section
Optical (Image scanning)
Item
Picture quality
Item
Set
range
Default
0 TRAY SELECT
Paper feed tray selection
0 - 99
50
1 COPY START
Copy START (Default)
2 MAGNIFICATION Print magnification ratio
3 CCD (MAIN)
3 CCD (MAIN)
SCAN main scanning
magnification ratio
adjustment (CCD)
magnification ratio
adjustment (CCD)
4 CCD (SUB)
SCAN sub scanning
magnification ratio
adjustment (CCD)
magnification ratio
adjustment (CCD)
5 SPF (SUB)
SPF front surface
magnification ratio
adjustment (Sub scan)
magnification ratio
adjustment (Sub scan)
6 CIS (MAIN)
SPF back surface
magnification ratio
adjustment (CIS main scan)
magnification ratio
adjustment (CIS main scan)
7 SPF (MAIN)
SPF front surface
magnification ratio
adjustment (Main scan)
magnification ratio
adjustment (Main scan)
Normal display
NOW COPYING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
SIMULATION 46-45
EXP.LEVEL SETUP SCANNER(600dpi). SELECT 0-5,AND PRESS
START.
0.AUTO
50
1.1.0
50
2.2.0
50
3.3.0
50
4.4.0
50
5.5.0
50
6.AUTO(H)
50
7.1.0(H)
50
8.2.0(H)
50
9.3.0(H)
50
10.4.0(H)
50
11.5.0(H)
50
50
SIMULATION 46-45
EXP.LEVEL SETUP SCANNER(600dpi). INPUT VALUE 0-99, AND
PRESS START.
0.AUTO
Click on the first or last page to see other AR-M700 (serv.man27) service manuals if exist.