DOWNLOAD Sharp AR-M620 (serv.man68) Service Manual ↓ Size: 5.25 MB | Pages: 127 in PDF or view online for FREE

The large capacity tray can hold up to 3,500 sheets of A4 size (8-1/2" x 11") SHARP standard paper (80 g/m

2

 (20

lbs.)). If you wish to change the paper size, please consult your dealer (the paper size must be changed by a service
technician).

When the tray is in
operation, do not use
excessive force to pull
the tray out. This may
damage the  tray.

The paper stack must
not be higher than the
indicator line (up to
3,500 sheets of SHARP
standard paper (80 g/m

2

(20 lbs.))

If the paper type was

changed, be sure to change the appropriate
settings as explained in "Setting the paper type
and paper size" (See page 2-10).

The paper table will
automatically rise to the
paper feed position.

Specifications are subject to change for improvement without notice.

Name

Large capacity tray (AR-LC6)

Paper size

A4 (8-1/2" x 11")

Paper weight

60 to 105 g/m

2

 (16 to 28 lbs.)

Paper capacity (plain)

3500 sheets (80 /m

2

 (20 lbs.))

Dimensions

376 mm (W) x 546 mm (D) x 518 mm (H)
(14-23/32" (W) x 21-1/2" (D) x 20-13/32" (H))

Power supply

Supplied from the main unit

Weight

Approximately 28.5 kg (62.9 lbs.)

Overall dimensions when
attached to machine

1347 mm (W) x 679 mm (D)
(53-3/64" (W) x 26-47/64" (D))

The bypass tray can be used to print on plain paper, postcards, label sheets, tabbed paper, and other special papers.
When using SHARP standard paper, up to 100 sheets can be loaded (up to 20 postcards) for continuous printing
similar to the other trays. For the paper types that can be used in the bypass tray, see "Specifications of paper trays
(Types and sizes of paper that can be used in the trays)" on page 2-8.

When loading A3, B4,
A4R, 11" x 17", 8-1/2" x
14", 8-1/2" x 13" or
8-1/2" x 11"R size paper,
be sure to pull the
auxiliary tray all the way
out. If the auxiliary tray is

not pulled all the way out, the size of the loaded
paper will not be correctly displayed.

Place the copy paper
face up. If the bypass
tray guides are set wider
than the copy paper, the
inside of the machine
may become soiled,
resulting in smudges on

succeeding copies. A gap may cause skewing
or wrinkling.

If the paper size was changed from an AB size to an
inch size, or from an inch size to an AB size,  or if the
paper type was changed, be sure to change the
appropriate settings as explained in "Setting the
paper type and paper size" (see page 2-10).

■

■

■

■ Loading tabbed paper in the bypass

[Example]
Make sure that the positions of the tabs correspond
with the originals as shown below.

Place the tabbed paper  face up.

After loading the paper in the bypass tray, be sure to set the paper type and size (step 4) if these were changed.

ABC

DEF

GHI

JKL

Front side

1st page

1st page

2nd page

2nd page

3rd page

3rd page

4th page

4th page

Tabbed paper

Original

Front

■

■

■

■ Important points when using the

● Be sure to load A5 paper, 5-1/2" x 8-1/2" paper

and postcards as shown (1) horizontal loading in
the diagram below.

(1):Horizontal loading
(2):Vertical loading

● When loading plain paper other than SHARP

standard paper, special media other than
postcards, SHARP-recommended transparency
film, or paper to be printed on the back, the
paper must be loaded one sheet at a time.
Loading more than one sheet at a time will cause
misfeeds.

● Before loading heavy paper, straighten any

curling in the paper.

● When adding paper, remove any paper

remaining in the tray, combine it with the paper
to be added, and reload as a single stack.

● Do not use paper that has already been printed

on by a plain paper fax machine or a laser
printer. This may cause printed images to
become dirty.

● When printing on transparency film, be sure to

remove each sheet as it exits the machine.
Allowing sheets to stack in the output tray may
cause curling.

● Use only Sharp-recommended transparency

film. Transparency film should be loaded in the
bypass tray with the label facing down and the
film oriented vertically. Smudging and a dirty
image may result if the film is placed with the
label facing up.

● When loading multiple sheets of transparency

film in the bypass tray, be sure to fan the sheets
several times before loading.

● Use only tabbed sheets that are made of paper.

Tabbed sheets made of film or other material
cannot be used.

(1)

(2)

Label facing down

The specifications for the types and sizes of paper that can be loaded in the paper trays are shown below.

Tray No. 

(tray name)

Applicable paper types

Applicable paper sizes

Paper weight

Tray 1

Plain paper (Refer to the next page
"More information on plain paper".)

A4, 8-1/2" x 11"

60 to 105g/m

2

(16 to 28 lbs.)

Tray 2

A4, B5, 8-1/2" x 11"

Tray 3

Plain paper
(Refer to the next page "More
information on plain paper".)

• When "AUTO-AB" is selected in "Setting

the paper type and paper size" (page
2-10), the following paper sizes can be
automatically detected:
A3, B4, A4, A4R, B5, B5R, A5R, 8-1/2" x 13"

• When "AUTO-INCH" is selected in "Setting

the paper type and paper size" (page
2-10), the following paper sizes can be
automatically detected:
11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2"

x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R

• Non-standard sizes

60 to 128g/m

2

(16 to 34 lbs.)

Special paper
(Refer to the
next page
"More
information on
special media
that can be
used".)

• Heavy paper
• Transparency

film

• Labels
• Tabbed paper

• When "AUTO-AB" is selected in "Setting

the paper type and paper size" (page
2-10), the following paper sizes can be
automatically detected:
A4, A4R, B5, B5R (only A4 for tabbed paper)

• When "AUTO-INCH" is selected in "Setting

the paper type and paper size" (page
2-10), the following paper sizes can be
automatically detected:
8-1/2" x 11", 8-1/2" x 11"R (only 8-1/2" x
11" for tabbed paper)

• Non-standard sizes smaller than A4 or

8-1/2" x 11"

• 40 sheets of transparency film can be loaded
• Tabbed paper can be used

See the remarks
for special papers
on the following
page.

Tray 4

Plain paper (Refer to the next
page "More information on plain
paper".)

• When "AUTO-AB" is selected in "Setting

the paper type and paper size" (page
2-10), the following paper sizes can be
automatically detected:
A3, B4, A4, A4R, B5, B5R, A5R, 8-1/2" x 13"

• When "AUTO-INCH" is selected in "Setting

the paper type and paper size" (page
2-10), the following paper sizes can be
automatically detected:
11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2"
x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R

• Non-standard sizes

60 to 128g/m

2

(16 to 34 lbs.)

Bypass tray

Same as tray 3. Postcards can also be used.
However,

• Up to 100 sheets of plain paper can be loaded.
• Up to 20 sheets of transparency film can be loaded.
• Up to 20 postcards can be loaded.

The same paper
as tray 3, and
also 52 to 59 g/m

2

(14 lbs. to 15 lbs.)
thin paper can be
used. 

Tray 5

Same as tray 2.