DOWNLOAD Sony XDC-40 / XR-C5100 Service Manual ↓ Size: 1.82 MB | Pages: 33 in PDF or view online for FREE

Model
XDC-40 XR-C5100
Pages
33
Size
1.82 MB
Type
PDF
Document
Service Manual
Brand
Device
Car Audio
File
xdc-40-xr-c5100.pdf
Date

Sony XDC-40 / XR-C5100 Service Manual ▷ View online

MICROFILM
SERVICE MANUAL
US Model
Canadian Model
E Model
XR-C5100
Model Name Using Similar Mechanism
XR-4800
Tape Transport Mechanism Type
MG-25F-136
AUDIO POWER SPECIFICATIONS (US model)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
17 watts per channel minimum continuous average power into 4 ohms,
4 channels driven from 20 Hz to 20 kHz with no more than 1% total
harmonic distortion.
Cassette player section
Tape track
4-track 2-channel stereo
Wow and flutter
0.08% (WRMS)
Frequency response
30 – 18,000 Hz
Signal-to-noise ratio
58 dB
Tuner section
FM
Tuning range
FM tuning interval:
87.5 – 107.9 MHz
(US, Canadian model)
50 kHz/200 kHz switchable
87.5 – 108.0 MHz (at 50 kHz step)
87.5 – 107.9 MHz (at 200 kHz step)
(E model)
Antenna terminal
External antenna connector
Intermediate frequency
10.7 MHz
Usable sensitivity
8 dBf
Selectivity
75 dB at 400 kHz
Signal-to-noise ratio
65 dB (stereo),
68 dB (mono)
Harmonic distortion at 1 kHz
0.5% (stereo),
0.3% (mono)
Separation
35 dB at 1 kHz
Frequency response
30 – 15,000 Hz
Capture ratio
2 dB
AM (MW)
Tuning range
AM tuning interval:
530 – 1,710 kHz
(US, Canadian model)
MW tuning interval:
9 kHz/10 kHz switchable
531–1,602 kHz (at 9 kHz step)
530 – 1,710 kHz (at 10 kHz step)
(E model)
Antenna terminal
External antenna connector
Intermediate frequency
10.71 MHz/450 kHz.
Sensitivity
30 µV
SW (E model)
Tuning range
SW tuning interval:
SW1: 2,940 – 7,735 kHz
SW2: 9,500 – 18,135 kHz
(except for 10,140 – 11,575 kHz)
Antenna terminal
External antenna connector
Intermediate frequency
10.71 MHz/450 kHz
Sensitivity
50 µV
SPECIFICATIONS
US, Canadian Model
FM/AM CASSETTE CAR STEREO
E Model
FM/MW/SW CASSETTE CAR STEREO
– Continued on next page –
– 2 –
TABLE  OF  CONTENTS
1.
GENERAL
Location of Controls ....................................................... 3
Resetting the Unit ........................................................... 4
Detaching the Front Panel ............................................... 4
Setting the Clock ............................................................. 4
Installation ....................................................................... 5
Connection ...................................................................... 7
2.
DISASSEMBLY
......................................................... 9
3.
ASSEMBLY  OF  MECHANISM DECK
............ 11
4.
MECHANICAL  ADJUSTMENTS
....................... 14
5.
ELECTRICAL  ADJUSTMENTS
Test Mode ........................................................................ 14
Tape Deck Section .......................................................... 14
Tuner Section .................................................................. 15
6.
DIAGRAMS
6-1. IC Pin Function Description ........................................... 17
6-2. Printed Wiring Board  –MAIN Section– ........................ 21
6-3. Schematic Diagram  –MAIN Section– ........................... 23
6-4. Printed Wiring Board  –PANEL Section– ...................... 27
6-5. Schematic Diagram  –PANEL Section– ......................... 29
7.
EXPLODED  VIEWS
................................................ 33
8.
ELECTRICAL  PARTS  LIST
............................... 36
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C dur-
ing repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
Power amplifier section
Outputs
Speaker outputs
(sure seal connectors)
Speaker impedance
4 – 8 ohms
Maximum power output 40 W 
×
 4 (at 4 ohms)
General
Outputs
Power antenna control
lead/Power amplifier
control lead/Telephone
ATT control lead (E model only)
Rear line out (1)
Tone controls
Bass ± 8 dB at 100 Hz
Treble ± 8 dB at 10 kHz
Power requirements
12 V DC car battery
(negative ground)
Dimensions
Approx. 188 
×
 58 
×
 181 mm
(7 
1
/
2
 
×
 2 
3
/
8
 
×
 7 
1
/
4
 in.)
(w/h/d)
Mounting dimensions
Approx. 182 
×
 53 
×
 164 mm
(7 
1
/
4
 
×
 2 
1
/
8
 
×
 6 
1
/
2
 in.)
(w/h/d)
Mass
Approx. 1.2 kg (2 lb. 10 oz.)
Supplied accessories
Parts for installation and connections (1 set)
Front panel case (1)
Design and specifications are subject to change without notice.
– 3 –
SECTION  1
GENERAL
This section is extracted from
instruction manual.
– 4 –
Page of 33
Display

Sony XDC-40 / XR-C5100 Service Manual ▷ Download

  • DOWNLOAD Sony XDC-40 / XR-C5100 Service Manual ↓ Size: 1.82 MB | Pages: 33 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony XDC-40 / XR-C5100 in PDF for free, which will help you to disassemble, recover, fix and repair Sony XDC-40 / XR-C5100 Car Audio. Information contained in Sony XDC-40 / XR-C5100 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.