DOWNLOAD Sharp AR-M351N / AR-M451N (serv.man10) Service Manual ↓ Size: 9.1 MB | Pages: 127 in PDF or view online for FREE

*1

Multiple punch modules cannot be installed together. Some models may not be available in some regions.

*2

With AR-PN1B, two or three holes can be punched depending on the paper size.

*3

With AR-PN1C and AR-PN1D, the number of holes is the same. The hole interval, however, is not the same.

Specifications are subject to change for improvement without notice.

AR-SC2 staple cartridges must be used for this finisher. The cartridge package
contains three cartridges approx. 5000 staples each.

■

■

■

■ Sort mode

Sorted sets will be delivered.

■

■

■

■ Offset mode

■

■

■

■ Group mode

Groups of copies of the same page will be
delivered.

Sets will move from side to side so that each set or
group will be offset from the previous set or group
for easy separation. The offset function can only be
used in the offset tray.
Stapled sets will not be offset.

Stapling capacity

A4 or 8-1/2" x 11" or smaller size: 50 sheets*(80 g/m

2

 or 20 lbs.)

B4 or 8-1/2" x 14" or larger size: 25 sheets*(80 g/m

2

 or 20 lbs.)

*Up to two sheets of 128 g/m

2

 or 34 lbs. paper can be included as covers.

Staples

Upper tray: Single staple can be placed in the top left or lower left corners or two
staples can be centred on the left side.
Lower tray: 120 mm (4-47/64") pitch from the centre of paper

Power supply

Supplied from machine

Dimensions

753 mm* (W) x 603 mm (D) x 953 mm (H) (29-41/64"* (W) x 23-3/4" (D) x 37-33/64" (H))
*When the top tray is extended.

Weight

Approx. 39 kg (86 lbs.)

Name

Punch module

Model*

1

AR-PN1A

AR-PN1B*

2

AR-PN1C*

3

AR-PN1D*

3

Number of holes

2

3 or 2

4

4

Paper sizes for hole
punching

A3, B4, A4, A4R, B5,
B5R, 11"x17",
8-1/2"x14", 8-1/2"x11",
8-1/2"x11"R

3 holes: A3, A4, 
11" x 17", 8-1/2" x 11", 
2 holes: 8-1/2"x14",
8-1/2" x 11"R

A3, A4

A3, B4, A4, A4R, B5,
B5R, 11"x17",
8-1/2"x14", 8-1/2"x11",
8-1/2"x11"R, 

Printouts

Original

Offset mode

Non-offset mode

Printouts

Original

03.fm  15 ページ  ２００４年１０月２６日　火曜日　午後５時４１分

■

■

■

■ Staple sort mode

Collated sets of prints or copies will be stapled and delivered to the offset tray. When saddle stitching is selected,
the prints or copies will be stapled at the centre and delivered to the saddle stitch tray. The stapling positions,
orientation, paper size for stapling, and stapling capacity are shown below.

■

■

■

■ Original orientation when using the staple sort or punch function

When using the staple sort or punch function, the original must be placed in the following orientations to enable
stapling or punching in the desired position on the paper.

Stapling positions

Top left corner of 
printouts

Centre left two 
positions of 
printouts

Lower left corner 
of printouts

Portrait orientation

Landscape orientation

Available paper sizes: A4, 
B5, and 8-1/2" x 11" 
Stapling capacity: Up to 50 
sheets for any sizes

Same as above

Same as above

Available paper sizes: A3, B4,  
A4R, 11" x 17", 8-1/2" x 14", 8-
1/2" x 13", and 8-1/2" x 11" R 
Stapling capacity: Up to 50 
sheets for A4R, B5R, and 8-1/2" 
x 11"R, and up to 25 sheets for 
other sizes

Available paper sizes: A3, B4,  
A4R, 11" x 17", 8-1/2" x 14", 8-
1/2" x 13", and 8-1/2" x 11" R 
Stapling capacity: Up to 50 
sheets for A4R, B5R, and 8-1/2" 
x 11"R, and up to 25 sheets for 
other sizes

Saddle stitch on 
centrefold line.

Paper in the portrait direction 
cannot be saddle stitched.

Available paper sizes: A3, 
B4, A4R, 11" x 17", and 8-
1/2" x 11"R
Stapling capacity: Up to 10 
sheets for any sizes

Available paper sizes: A3, B4,  
A4R, 11" x 17", 8-1/2" x 14", 8-
1/2" x 13", and 8-1/2" x 11" R 
Stapling capacity: Up to 50 
sheets for A4R, B5R, and 8-1/2" 
x 11"R, and up to 25 sheets for 
other sizes

Staple sort

Document feeder

Document glass

Punch

Document feeder

Document glass

03.fm  16 ページ  ２００４年１０月２６日　火曜日　午後５時４４分

■

■

■

■ Saddle stitch function

The saddle stitch finisher can automatically place two
staples for centreline binding of prints or copies and fold
them along the centreline.

■

■

■

■ Hole punching (only if a punch module is
installed)

If the saddle stitch finisher is equipped with a hole punch
module, printed paper can be hole punched and delivered
to the offset tray. Saddle stitching and hole punching
cannot be selected at the same time. The automatic image
rotation will not function when the hole punching function
is used.
Two or three holes can be punched depending on the
paper size. (See paper sizes for hole punching on page
4-4.)
If the punching function is enabled for a paper size that
cannot be punched, the paper will be output without being
punched. (For paper sizes that can be punched, see the
specifications on page 3-15.) When using the punching
function in copy mode, place the original with the top edge
toward the back of the machine. If the original is not placed
in this orientation, punching will not take place at the
correct positions.

<Example>

{Original 2}

{Punch positions}

{Original 1}

{Punch positions}

Copy_EX.book  17 ページ  ２００４年９月２８日　火曜日　午後９時５４分

When [OUTPUT] is selected on the main screen of copy mode, a screen for making selections for sort, group, staple
sort, saddle stitch, punch and exit tray will appear.

When Group is selected, all copies of the same
original will be grouped.

(2) [STAPLE SORT] key (See page 3-16.)

When Staple Sort is selected, sorted sets will be
stapled and delivered to the offset tray. (They will
not be offset stacked.)

When Sort is selected, sets of copies will be
sequentially delivered.

An icon representing a selected function (sort,
staple sort or group saddle stitch) is displayed.

If Offset is checked, the offset will be enabled. If not
checked, the offset will not function. If the staple
sort is selected, the check mark of offset will be
automatically selected.

If the centre tray is selected, output paper will be
delivered to the exit tray.

Press to close the [OUTPUT] screen and to return
to the main screen.

When the offset tray is selected, copies will be
delivered to the offset tray. When staple sort is
selected, the offset tray will be automatically
cancelled.

When saddle stitching is selected, the copies will
be stapled at the centre and delivered to the saddle
stitch tray.

(10) [PUNCH] key (See page 3-17.)

If the saddle stitch finisher is equipped with a punch
module, printed paper can be hole punched and
delivered to the offset tray.

* As a selection is made, the touch key for the

selection will be highlighted.

OUTPUT

OFFSET

OK

SADDLE
STITCH

PUNCH

OFFSET

TRAY

CENTRE

TRAY

STAPLE 

SORT

SORT

GROUP

(1)

(8)

(2)

(9)

(10)

(4)(5)

(6)

(7)

(3)

Copy_EX.book  18 ページ  ２００４年９月２８日　火曜日　午後９時５４分