Sharp AR-M351N / AR-M451N (serv.man10) User Manual / Operation Manual ▷ View online
SADDLE STITCH FINISHER
3-19
3
Staple cartridge replacement and staple jam removal
When the staple cartridge becomes empty or staples become jammed, a message will appear in the message
display of the operation panel.
Follow the procedure below to replace the staple cartridge or remove jammed staples.
display of the operation panel.
Follow the procedure below to replace the staple cartridge or remove jammed staples.
■
■
■
■ Staple cartridge replacement
1
Open the front cover.
2
Pull out the stapler section.
3
Turn roller rotating knob A in the direction
of the arrow to move the staple unit to the
front.
of the arrow to move the staple unit to the
front.
Turn the roller rotating
knob until the triangle
mark is aligned with the
index.
knob until the triangle
mark is aligned with the
index.
4
Remove the empty staple box.
5
Remove the empty staple cartridge.
Press the lock button to
unlock the staple box
cover and remove the
staple cartridge.
unlock the staple box
cover and remove the
staple cartridge.
6
Insert a new staple cartridge into the
staple box.
staple box.
After inserting the staple
cartridge, press down on
the staple box cover to
lock the cartridge in
place.
cartridge, press down on
the staple box cover to
lock the cartridge in
place.
7
Remove the tape from the staple cartridge
by pulling it straight.
by pulling it straight.
8
Insert the staple box.
Push the staple box in
until it clicks into place.
until it clicks into place.
9
Push the stapler section back into the
finisher.
finisher.
10
Close the front cover.
NOTE
If staples remain, the staple cartridge cannot be
removed.
removed.
Roller rotating
Staple unit
knob A
NOTES
● Do not remove the tape from the cartridge before
● Do not remove the tape from the cartridge before
inserting the staple cartridge into the box.
● Make sure that the staple cartridge is secured
firmly.
● When reinstalling the staple box, push it in until it
clicks into plac
e.
NOTE
Make a test print or copy in the staple sort mode to
ensure that stapling is performed properly.
ensure that stapling is performed properly.
Copy_EX.book 19 ページ ２００４年９月２８日 火曜日 午後９時５４分
SADDLE STITCH FINISHER
3-20
■
■
■
■ Staple jam removal
1
Unlatch the saddle stitch finisher and slide
it away from the machine.
it away from the machine.
2
Open the front cover.
3
Turn roller rotating knob C as shown in the
illustration until the blue indication is
seen.
illustration until the blue indication is
seen.
4
Remove the paper from the stapler
compiler.
compiler.
5
If saddle stitch was selected, open the
saddle stitch section cover.
saddle stitch section cover.
6
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
7
Close the saddle stitch section cover.
8
Open the front cover and pull out the
stapler unit.
stapler unit.
Roller rotating
knob C
knob C
Blue
Copy_EX.book 20 ページ ２００４年９月２８日 火曜日 午後９時５４分
SADDLE STITCH FINISHER
3-21
3
9
Turn roller rotating knob A in the direction
of the arrow to move the staple unit to the
front.
of the arrow to move the staple unit to the
front.
Turn the roller rotating
knob until the triangle
mark is aligned with the
index.
knob until the triangle
mark is aligned with the
index.
10
Remove the staple box.
11
Raise the lever at the end of the staple box.
Remove the top staple if
it is bent. If bent staples
remain, a staple jam will
occur again.
it is bent. If bent staples
remain, a staple jam will
occur again.
12
Return the lever to its original position.
13
Reinstall the staple box.
Push the staple box in
until it clicks into place.
until it clicks into place.
14
Push the stapler section back into the finisher.
15
Close the front cover.
16
Push the saddle stitch finisher back against the
machine.
machine.
■
■
■
■ Disposal of hole punch scrap
1
Unlatch the saddle stitch finisher and slide
it away from the machine.
it away from the machine.
2
Pull out the punch scrap collecting
container and empty it.
container and empty it.
Empty the punch debris
into a plastic bag or
other container for
disposal, taking care not
to spill any of the punch
debris.
into a plastic bag or
other container for
disposal, taking care not
to spill any of the punch
debris.
3
Return the punch scrap collecting
container to its original position.
container to its original position.
4
Push the saddle stitch finisher back
against the machine.
against the machine.
Staple unit
Roller rotating
knob A
knob A
NOTE
Make a test print or copy in the staple sort mode to
ensure that stapling is performed properly.
Make a test print or copy in the staple sort mode to
ensure that stapling is performed properly.
Copy_EX.book 21 ページ ２００４年９月２８日 火曜日 午後９時５４分
SADDLE STITCH FINISHER
3-22
Misfeed in the saddle stitch finisher
When a misfeed occurs in the saddle stitch finisher, remove the misfed paper following the procedure below.
1
Press the detach button and separate the
saddle stitch finisher from the machine.
saddle stitch finisher from the machine.
2
Remove any misfed paper from the
machine.
machine.
3
If there was no misfed paper in step 2, pull
roller rotating knob B on the punch unit
toward you and rotate it. (Only when an
optional punch unit is installed.)
roller rotating knob B on the punch unit
toward you and rotate it. (Only when an
optional punch unit is installed.)
Rotating roller rotating
knob B releases the
caught paper.
knob B releases the
caught paper.
4
Open the top cover.
5
Remove the misfed paper.
Remove the paper
gently, taking care not to
tear it.
gently, taking care not to
tear it.
6
Close the top cover.
7
Remove any misfed paper from the stapler
compiler.
compiler.
Remove the paper
gently, taking care not to
tear it.
gently, taking care not to
tear it.
8
Open the cover of the saddle stitch
section.
section.
9
Remove the misfed paper.
Remove the paper
gently, taking care not to
tear it.
gently, taking care not to
tear it.
CAUTION
The saddle stitch finisher and the machine are
connected at the rear. Exercise caution when pulling
them apart.
connected at the rear. Exercise caution when pulling
them apart.
Roller rotating
knob B
Copy_EX.book 22 ページ ２００４年９月２８日 火曜日 午後９時５４分
Click on the first or last page to see other AR-M351N / AR-M451N (serv.man10) service manuals if exist.