Sharp AR-M351N / AR-M451N (serv.man10) User Manual / Operation Manual ▷ View online
SPECIAL MODES
5-5
5
Dual page copy
The dual page copy function produces separate copies of two documents placed side by side on the document glass.
This function is especially useful when copying books and other bound documents.
This function is especially useful when copying books and other bound documents.
[Example] Copying right and left pages of a book
1
Touch the [DUAL PAGE COPY] key on the
special modes screen.
special modes screen.
The [DUAL PAGE
COPY] key will be
highlighted to indicate
that the function is
turned on, and the dual
page copy icon (
COPY] key will be
highlighted to indicate
that the function is
turned on, and the dual
page copy icon (
) will
appear in the upper left
of the screen.
of the screen.
2
Touch the [OK] key on the special modes
screen.
screen.
You will return to the main screen of copy mode.
3
Place the originals on the document glass.
When copying a thick
book, press down lightly
on the book to flatten it
against the document
glass.
book, press down lightly
on the book to flatten it
against the document
glass.
Place the opened original on the document glass so
that the first page you wish to copy is on the right and
the centre of the original is aligned with the size mark.
that the first page you wish to copy is on the right and
the centre of the original is aligned with the size mark.
4
Ensure that 8-1/2" x 11" (A4) size paper is
selected.
selected.
If A4 (8-1/2" x 11") size
paper is not selected,
touch the [PAPER
SELECT] key to select
A4 (8-1/2" x 11") size
paper.
paper is not selected,
touch the [PAPER
SELECT] key to select
A4 (8-1/2" x 11") size
paper.
●The dual page copy function can be used only
when copying from the document glass. The
automatic document feeder cannot be used with
this function.
automatic document feeder cannot be used with
this function.
●Only A4 (8-1/2" x 11") paper can be used.
Book original
Dual page copy
To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.
See "General procedure for using special
functions" on page 5-2.
RASE
OK
1/3
DUAL PAGE
COPY
JOB
BUILD
TANDEM
COPY
Index
A3
Centre line of
original
original
A4
This page
is copied
first.
is copied
first.
A4
1
/
2
(8 "
x 11")
(11" x 17")
8 "
x 11"
1
/
2
About the steps that follow
For two-sided copying, follow steps 2 through 4
on page 4-13 and then follow steps 4 through 7
on page 4-12.
For one-sided copying, follow steps 4 through
7 on page 4-12.
For two-sided copying, follow steps 2 through 4
on page 4-13 and then follow steps 4 through 7
on page 4-12.
For one-sided copying, follow steps 4 through
7 on page 4-12.
NOTE
To erase shadows caused by document binding, use
the edge erase function (page 5-4). (Centre Erase
and Edge + Centre Erase cannot be used in
combination.)
the edge erase function (page 5-4). (Centre Erase
and Edge + Centre Erase cannot be used in
combination.)
To cancel the dual page copy function, touch the
[DUAL PAGE COPY] key on the special modes
screen (screen of step 1).
[DUAL PAGE COPY] key on the special modes
screen (screen of step 1).
UTO
AUTO
100%
A4
PAPER SELECT
OPY RATIO
EXPOSURE
Copy_EX.book 5 ページ ２００４年９月２８日 火曜日 午後９時５４分
SPECIAL MODES
5-6
Pamphlet copy
The pamphlet copy function is used to arrange copies in proper order for eventual centre-stapling and folding into a
booklet. Two original pages are copied onto each side of copy paper. Four pages are, therefore, copied onto one sheet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
booklet. Two original pages are copied onto each side of copy paper. Four pages are, therefore, copied onto one sheet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
[Example] Copying eight originals in the pamphlet copy mode
● When using this function, a duplex module must
be installed.
● Scan the originals from the first page to the last
page. The order of copying will be automatically
adjusted by the machine.
adjusted by the machine.
● Either left binding (right to left turning) or right
binding (left to right turning) can be selected.
● Four originals will be copied onto one sheet.
Blank pages may be automatically produced at
the end depending on the number of the originals.
the end depending on the number of the originals.
● If a saddle stitch finisher is installed, copies can
be stapled in two positions along the centre of
copies and folded at the centre.
copies and folded at the centre.
1
Touch the [PAMPHLET COPY] key on the
special modes screen.
special modes screen.
The PAMPHLET COPY
setting screen will
appear. The pamphlet
copy icon (
setting screen will
appear. The pamphlet
copy icon (
, etc.) will
also appear in the upper
left corner of the screen
to indicate that the
function is turned on.
left corner of the screen
to indicate that the
function is turned on.
2
Designate the type of originals to be
copied: 1-sided or 2-sided.
copied: 1-sided or 2-sided.
Select the [2-SIDED]
key if you wish to scan a
two-sided original using
the automatic document
feeder.
key if you wish to scan a
two-sided original using
the automatic document
feeder.
3
Select the binding position (left binding or
right binding).
right binding).
If you wish to insert a different type of paper for use as
a cover, follow steps 4 through 12 below.
a cover, follow steps 4 through 12 below.
If you do not wish to insert paper for a cover, continue
from step 8 on the next page.
from step 8 on the next page.
4
Touch the [COVER SETTING] key.
NOTE
To make pamphlet copies of a book or other bound original, use the book copy function (page 5-25). The book
copy function scans the opened original in two-page units. (Two pages are scanned at each scan, reducing the
number of repetitions of the scanning operation by a half.)
copy function scans the opened original in two-page units. (Two pages are scanned at each scan, reducing the
number of repetitions of the scanning operation by a half.)
Finished copies are
folded in two.
folded in two.
Originals
(one-sided)
(one-sided)
1
2
3
4
5
6
7
8
7
8
5
6
3
4
Originals
(two-sided)
(two-sided)
1
2
Left binding
Right binding
First page
First page
To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.
See "General procedure for using special
functions" on page 5-2.
SPECI L MODES
MARGIN SHIFT
PAMPHLET COPY
ERASE
JOB
BUILD
2-SIDED
ORIGINAL
1-SIDED
RIGHT
BINDING
C
SE
LEFT
BINDING
CANCEL
OK
RIGHT
BINDING
COVER
SETTING
NG
Copy_EX.book 6 ページ ２００４年９月２８日 火曜日 午後９時５４分
SPECIAL MODES
5-7
5
5
Select whether or not you wish to copy on
the cover ("YES" or "NO").
the cover ("YES" or "NO").
6
Select the paper tray for the cover.
(1)The currently selected
paper tray for the
cover is displayed.
cover is displayed.
(2)The size and type of
paper in the currently
selected tray is
displayed.
selected tray is
displayed.
In the example screen above, A4 (8-1/2" x 11")
size plain paper is loaded.
size plain paper is loaded.
To change the paper tray for the cover, touch the tray
selection key. (In the screen example, the " TRAY2"
display is the tray selection key.)
selection key. (In the screen example, the " TRAY2"
display is the tray selection key.)
The tray selection screen appears when the tray
selection key is touched. Select the desired tray in
this screen.
selection key is touched. Select the desired tray in
this screen.
7
Touch the [OK] key.
8
Touch the [OK] key.
Return to the main
screen of copy mode.
screen of copy mode.
9
Place the original in the document feeder
or on the document glass. (page 4-3)
or on the document glass. (page 4-3)
10
Ensure that the desired paper size has
been automatically selected based on the
original size.
been automatically selected based on the
original size.
To select another size
paper, select the desired
size and touch the
[AUTO IMAGE] key. The
appropriate copy ratio
will be selected
automatically based on
paper, select the desired
size and touch the
[AUTO IMAGE] key. The
appropriate copy ratio
will be selected
automatically based on
the original size and the paper size. (See steps 2
and 3 on page 4-15.)
and 3 on page 4-15.)
11
Select any desired copy settings such as
the exposure or number of copies, and
then press the [START] key.
the exposure or number of copies, and
then press the [START] key.
12
[When using the automatic document
feeder:]
feeder:]
Copying will start after all originals have been
scanned. (The next step is not needed.)
scanned. (The next step is not needed.)
[When using the document glass:]
Replace the original with the next original and
press the [START] key. Repeat this operation until
all originals have been scanned and then touch
the [READ-END] key.
press the [START] key. Repeat this operation until
all originals have been scanned and then touch
the [READ-END] key.
NOTES
● Two-sided copying is not possible on label sheets,
● Two-sided copying is not possible on label sheets,
and transparency film. When copying on a cover,
do not select a tray that has one of these types of
paper.
do not select a tray that has one of these types of
paper.
● Select the same size of paper for the covers as for
the copies.
NO
PRINT ON COVER
YES
CANCEL
OK
TRAY2
PAPER TRAY
A4
PLAIN
(1)
(2)
CANCEL
OK
RIGHT
BINDING
COVER
SETTING
G
CANCEL
OK
OK
RIGHT
BINDING
COVER
SETTING
LEFT
BINDING
NOTES
● When the pamphlet copy function is set, the two-
● When the pamphlet copy function is set, the two-
sided copying mode will be automatically
selected.
selected.
● If this function is used in combination with the
pamphlet copy function (pamphlet stapling) and
the number of original pages exceeds the number
of pages that can be stapled, a message asking
you to select "CANCEL", "CONTINUE", or
"DIVIDE" will appear.
To cancel the job, select "CANCEL". To make
pamphlet copies without stapling, select
"CONTINUE". To divide the pages into sets that
can be stapled, select "DIVIDE".
If you performed steps 4 to 6 to insert cover paper,
divided stapling is not possible. You can either
continue pamphlet copying without stapling, or
cancel the job.
the number of original pages exceeds the number
of pages that can be stapled, a message asking
you to select "CANCEL", "CONTINUE", or
"DIVIDE" will appear.
To cancel the job, select "CANCEL". To make
pamphlet copies without stapling, select
"CONTINUE". To divide the pages into sets that
can be stapled, select "DIVIDE".
If you performed steps 4 to 6 to insert cover paper,
divided stapling is not possible. You can either
continue pamphlet copying without stapling, or
cancel the job.
To cancel the pamphlet copy function, touch the
[CANCEL] key on the pamphlet copy setting screen
(step 7).
[CANCEL] key on the pamphlet copy setting screen
(step 7).
UTO
AUTO
100%
A3
PAPER SELECT
OPY RATIO
EXPOSURE
Copy_EX.book 7 ページ ２００４年９月２８日 火曜日 午後９時５４分
SPECIAL MODES
5-8
Job build
Use job build mode when you need to copy more originals than can be placed in the document feeder at once. The
maximum number of originals that can be placed in the document feeder at once is 50 sheets (30 sheets when the
size is B4 or larger; for more information see "Acceptable originals" on page 4-2). This function lets you divide and
scan the originals in sets. This function allows the original pages to be scanned in sets.
maximum number of originals that can be placed in the document feeder at once is 50 sheets (30 sheets when the
size is B4 or larger; for more information see "Acceptable originals" on page 4-2). This function lets you divide and
scan the originals in sets. This function allows the original pages to be scanned in sets.
[Example] Copying 100 pages of A4 originals
1
Touch the [JOB BUILD] key on the special
modes screen.
modes screen.
The [JOB BUILD] key
will be highlighted to
indicate that the function
is turned on, and the job
build icon (
will be highlighted to
indicate that the function
is turned on, and the job
build icon (
) will
appear in the upper left
of the screen.
of the screen.
2
Touch the [OK] key on the special modes
screen.
screen.
Return to the main
screen of copy mode.
screen of copy mode.
3
Place the first set of originals in the
document feeder tray. (page 4-3)
document feeder tray. (page 4-3)
4
Make sure that the desired paper size is
selected, select the number of copies or
other copy settings, and press the
[START] key.
selected, select the number of copies or
other copy settings, and press the
[START] key.
Scanning of originals will
start. After scanning of
the first set of originals (A
in the example above) is
completed, remove the
scanned originals, place
the next set of originals
start. After scanning of
the first set of originals (A
in the example above) is
completed, remove the
scanned originals, place
the next set of originals
(set B in the example) and press the [START] key.
Repeat this operation until all sets of originals have
been scanned.
Repeat this operation until all sets of originals have
been scanned.
5
Touch the [READ-END] key.
Originals
*
Divide the originals into sets of 50 pages each.
Scan the originals starting from the first page of set
A. Scan set B next, taking care to keep the correct
page order.
A. Scan set B next, taking care to keep the correct
page order.
A:
50 sheets
B:
50 sheets
100 original pages
1
1
51
To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.
See "General procedure for using special
functions" on page 5-2.
ES
N SHIFT
LET COPY
ERASE
DUAL
COP
JOB
BUILD
TANDE
COPY
RASE
OK
1/3
DUAL PAGE
COPY
JOB
BUILD
TANDEM
COPY
To cancel the job build function, touch the [JOB
BUILD] key on the special modes screen (step 1).
The highlighted display will be cancelled.
BUILD] key on the special modes screen (step 1).
The highlighted display will be cancelled.
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
Copy_EX.book 8 ページ ２００４年９月２８日 火曜日 午後９時５４分
Click on the first or last page to see other AR-M351N / AR-M451N (serv.man10) service manuals if exist.