Sharp AR-M351N / AR-M451N (serv.man10) User Manual / Operation Manual ▷ View online
5-1
CHAPTER 5
CONVENIENT COPY
FUNCTIONS
This chapter explains special-purpose functions, storing of copy
settings, and other convenient functions. Please select and read
sections of this chapter as needed.
settings, and other convenient functions. Please select and read
sections of this chapter as needed.
Page
SPECIAL MODES................................................................................... 5-2
●
General procedure for using special functions................................ 5-2
●
Margin shift...................................................................................... 5-3
●
Erase............................................................................................... 5-4
●
Dual page copy ............................................................................... 5-5
●
Pamphlet copy ................................................................................ 5-6
●
Job build.......................................................................................... 5-8
●
Tandem copy .................................................................................. 5-9
●
Covers/inserts ................................................................................. 5-11
●
Transparency film with insert sheets............................................... 5-22
●
Multi shot......................................................................................... 5-23
●
Book copy ....................................................................................... 5-25
●
Card shot......................................................................................... 5-26
●
Mirror image .................................................................................... 5-28
●
B/W reverse .................................................................................... 5-28
●
Print menu....................................................................................... 5-29
STORING, USING AND DELETING JOB PROGRAMS......................... 5-41
●
Storing a job program...................................................................... 5-41
●
Calling up a job program ................................................................. 5-42
●
Deleting a stored job program......................................................... 5-42
INTERRUPTING A COPY RUN.............................................................. 5-43
Copy_EX.book 1 ページ ２００４年９月２８日 火曜日 午後９時５４分
5-2
SPECIAL MODES
Touch the [SPECIAL MODES] key in the main screen of copy mode to open the special modes screen. The following
functions can be selected in the special modes screen.
functions can be selected in the special modes screen.
(1) Margin shift (page 5-3)
(2) Erase (page 5-4)
(3) Dual page copy (page 5-5)
(4) Pamphlet copy (page 5-6)
(5) Job build (page 5-8)
(6) Tandem copy (page 5-9)
(7) [OK] key on the special modes screen
Touch the [OK] key to return to the main screen of
copy mode.
copy mode.
(8)
/
key
Touch these keys to change the special modes
screen.
screen.
There are three special modes screens.
Touch the
Touch the
key to change to the other two screens.
●The following special functions can be selected in the 2nd screen (2/3).
Covers/inserts (page 5-11)
Transparency inserts (page 5-22)
Multi shot (page 5-23)
Transparency inserts (page 5-22)
Multi shot (page 5-23)
Book copy (page 5-25)
Card shot (page 5-26)
Mirror image (page 5-28)
Card shot (page 5-26)
Mirror image (page 5-28)
●The following special functions can be selected in the 3rd screen (3/3).
B/W reverse (page 5-28)
Print menu (page 5-29)
General procedure for using special functions
1
Touch the [SPECIAL MODES] key.
2
Touch the key for the desired special
mode.
mode.
Example:
Selecting the margin
shift function
Selecting the margin
shift function
To select a special function in one of the other two
screens, use the
screens, use the
/
keys to change the
screen.
SPECIAL MODES
MARGIN SHIFT
PAMPHLET COPY
ERASE
OK
1/3
DUAL PAGE
COPY
JOB
BUILD
TANDEM
COPY
SPECIAL MODES
2-SIDED COPY
OUTPUT
QUICK FILE
FILE
READY TO SCAN FOR COPY.
AUTO
100%
AUTO
AUTO
A4
ORIGINAL
EXPOSURE
PAPER
COPY RATIO
ORIGINAL
A4
A4
A4
A4
A4
B4
A3
A3
Touch the [SPECIAL MODES] key
in the main screen.
(1)
(2)
(3)
(4)
(5)
(7)
(6)
(8)
SPECIAL MODES
2-SIDED COPY
OUTPUT
SPECIAL MODES
MARGIN SHIFT
PAMPHLET COPY
ERASE
JOB
BUILD
Setting procedures for modes requiring setting
screens start on the next page.
The dual page copy, job build, tandem copy,
mirror image and B/W reverse functions do not
require setting screens.
screens start on the next page.
The dual page copy, job build, tandem copy,
mirror image and B/W reverse functions do not
require setting screens.
Copy_EX.book 2 ページ ２００４年９月２８日 火曜日 午後９時５４分
SPECIAL MODES
5-3
5
Margin shift
The margin shift function will automatically shift the text or image on the copy paper approximately 10 mm (1/2") in
its initial setting.
This function is convenient when stapling or binding copies with a string.
its initial setting.
This function is convenient when stapling or binding copies with a string.
1
Touch the [MARGIN SHIFT] key on the
special modes screen.
special modes screen.
The margin shift setting
screen will appear.
The margin shift icon
(
screen will appear.
The margin shift icon
(
) will also appear in
the upper left of the
screen to indicate that
the function is turned on.
screen to indicate that
the function is turned on.
2
Select the shift direction.
Touch a shift direction
key to select right or left.
The selected key will be
highlighted.
key to select right or left.
The selected key will be
highlighted.
3
Set the shift amount as needed and touch
the [OK] key.
the [OK] key.
Use the
and the
keys to set the shift
amount. The shift
amount can be set from
0 to 20 mm in 1 mm (0"
to 1" in 1/8") increments.
amount. The shift
amount can be set from
0 to 20 mm in 1 mm (0"
to 1" in 1/8") increments.
4
Touch the [OK] key on the special modes
screen.
screen.
You will return to the main screen of copy mode.
NOTES
● The initial setting for the margin width can be changed in the key operator programs to any value from 0 to 20
● The initial setting for the margin width can be changed in the key operator programs to any value from 0 to 20
mm (0 to 1"). (Page 15 of the Key operator's guide)
● When margin shift is selected, rotating copying will not operate even if the condition for rotate copying is met.
Image shifted
to the right
Image shifted
to the left
Margin
Margin
Original
Two-sided copying
Image shifted
to the right
Margin
Image shifted
to the left
Margin
Or
One-sided copying
Original
●The shift direction can be selected from right or left
shift as shown in the illustration.
To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.
See "General procedure for using special
functions" on page 5-2.
SPECIAL MODES
MARGIN SHIFT
PAMPHLET COPY
ERASE
JOB
BUILD
RIGHT
LEFT
About the steps that follow
If an automatic document feeder is being used,
see pages 4-7 through 4-10. If the document
glass is being used, see pages 4-11 through 4-
13.
If an automatic document feeder is being used,
see pages 4-7 through 4-10. If the document
glass is being used, see pages 4-11 through 4-
13.
To cancel the margin shift function, touch the
[CANCEL] key on the margin shift setting screen.
[CANCEL] key on the margin shift setting screen.
SIDE 1
(0 20)
mm
mm
(0 20)
mm
mm
SIDE 2
OK
CANCEL
OK
10
10
Copy_EX.book 3 ページ ２００４年９月２８日 火曜日 午後９時５４分
SPECIAL MODES
5-4
Erase
The erase function is used to erase the shadow lines on copies produced when copying thick originals or books. The
erase modes that can be selected are shown below. The erase width is approximately 10 mm (1/2") in it's initial
setting.
erase modes that can be selected are shown below. The erase width is approximately 10 mm (1/2") in it's initial
setting.
EDGE ERASE
Eliminates shadow lines around the edges of
copies caused when heavy paper or a book is used
as an original.
Eliminates shadow lines around the edges of
copies caused when heavy paper or a book is used
as an original.
CENTRE ERASE
Eliminates shadow lines produced by the bindings
of bound documents.
Eliminates shadow lines produced by the bindings
of bound documents.
EDGE + CENTRE ERASE
Eliminates shadow lines around the edges of copies
and eliminates the shadow at the centre of copies.
Eliminates shadow lines around the edges of copies
and eliminates the shadow at the centre of copies.
1
Touch the [ERASE] key on the special
modes screen.
modes screen.
The erase setting screen
will appear.
The erase icon (
will appear.
The erase icon (
) will
also appear in the upper
left of the screen to
indicate that the function
is turned on.
left of the screen to
indicate that the function
is turned on.
2
Select the desired erase mode.
Select one of the three
erase modes. The
selected key will be
highlighted.
erase modes. The
selected key will be
highlighted.
3
Adjust the amount of erase and touch the
[OK] key.
[OK] key.
Use the
and
keys
to set the erase width to
any value from 0 to 10
mm in 1 mm increments
(0" to 1" in increments of
1/8").
any value from 0 to 10
mm in 1 mm increments
(0" to 1" in increments of
1/8").
4
Touch the [OK] key on the special modes
screen.
screen.
You will return to the main screen of copy mode.
NOTE
The initial setting for the erasure width can be changed in the key operator programs to any value from 0 to 20 mm
(0 to 1"). (Page 15 of the Key operator's guide)
(0 to 1"). (Page 15 of the Key operator's guide)
Original
Copy
To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.
See "General procedure for using special
functions" on page 5-2.
MODES
RGIN SHIFT
PHLET COPY
ERASE
DUAL
C
JOB
BUILD
TAN
C
EDGE
ERASE
ERASE
CENTRE
ERASE
EDGE+CENTRE
ERASE
About the steps that follow
If an automatic document feeder is being used,
see pages 4-7 through 4-10. If the document
glass is being used, see pages 4-11 through 4-
13.
If an automatic document feeder is being used,
see pages 4-7 through 4-10. If the document
glass is being used, see pages 4-11 through 4-
13.
NOTE
When erase is used, edge erase takes place at the
edges of the original image. If you also use a ratio
setting, the edge erase width will change according
to the set ratio.
edges of the original image. If you also use a ratio
setting, the edge erase width will change according
to the set ratio.
To cancel the erase function, touch the [CANCEL]
key on the erase setting screen (step3).
key on the erase setting screen (step3).
EDGE
CANCEL
OK
10
(0 20)
mm
mm
Copy_EX.book 4 ページ ２００４年９月２８日 火曜日 午後９時５４分
Click on the first or last page to see other AR-M351N / AR-M451N (serv.man10) service manuals if exist.