Sharp AR-M35 / AR-M450 (serv.man11) Service Manual ▷ View online
AR-M350 SPECIFICATIONS 3-3
e. Font
f. Others
* 1 In the models without a hard disk drive, an optional hard disk drive
must be installed .
* 2 Functions when peripheral devices are installed.
* 3 Not supported in the Windows NT 4.0 environment.
* 3 Not supported in the Windows NT 4.0 environment.
* 4 2/4/6/9/16 is supported in the Windows 2000 environment.
* 5 Only one size is supported in the Windows 2000 environment.
* 6 Only 35 fonts are supported in the Windows NT 4.0 environment.
* 6 Only 35 fonts are supported in the Windows NT 4.0 environment.
* 7 This function is limited for PPD.
* 8 PCL6 only
(5) Compatibility
B. Expanded RAM
Installation of an expanded RAM will avoid the following status.
1) Time out error reduction
2) Spool time reduction
2) Spool time reduction
3) Avoidance of VM error / memory full
Use a commercially available RAM of the following specifications.
If a RAM which does not meet the specifications is installed, it may cause
a trouble such as that it is not recognized or its capacity is not correctly
recognized.
recognized.
<Spesification>
<Operation-assured Memory> (As of March / 2001)
C. Scanner function
(1) Scanner function
(2) Support System
(3) Support Image
(4) Transmission Mode
When an optional PS3 expansion kit is
installed
installed
Function
PCL5e/
PCL6
PCL6
PS
PPD
(Windows)
(Windows)
PPD
(Macintosh)
(Macintosh)
Resident font
45 fonts
136 fonts
136
fonts*6
fonts*6
35 fonts
Download font
Bitmap
TrueType,
Graphic
TrueType,
Graphic
Bitmap
Type1
TrueType
Type1
TrueType
Bitmap
Type1
TrueType
Type1
TrueType
N/A
When an optional PS3 expansion kit is
installed
installed
Function
PCL5e/
PCL6
PCL6
PS
PPD
(Windows)
(Windows)
PPD
(Macintosh)
(Macintosh)
Watermark*7
Yes
Yes
Yes
Yes
Overlay
Yes
Yes
N/A
N/A
Job retention*1
Yes
Yes
N/A
Yes
Account control
Yes
Yes
N/A
Yes
Custom settings Yes
Yes
N/A
N/A
Automatic
configuration*2
configuration*2
Yes
Yes
N/A
Yes
Job end
notification
notification
Yes
Yes
N/A
N/A
PCL 5e
compatibility
compatibility
Target for PCL5e is to be compatible with HP LaserJet
4000.
Small margin difference, rendering difference by
different font family, default and transfer function
difference are not to be included in the compatibility.
All the PJL commands are not necessarily included in
the compatibility.
4000.
Small margin difference, rendering difference by
different font family, default and transfer function
difference are not to be included in the compatibility.
All the PJL commands are not necessarily included in
the compatibility.
PCL6
compatibility
compatibility
Target for PCL6 is to be compatible with HP LaserJet
4000.
Small margin difference, rendering difference by
different font family, default and transfer function
difference are not to be included in the compatibility.
All the PJL commands are not necessarily included in
the compatibility.
4000.
Small margin difference, rendering difference by
different font family, default and transfer function
difference are not to be included in the compatibility.
All the PJL commands are not necessarily included in
the compatibility.
PostScript
Compatibility
Compatibility
Roman PostScript is targeted to be compatible with
Adobe PostScript as performed in HP LaserJet 4000.
Small margin difference, rendering difference by
different font family, default and transfer function
difference are not to be included in the compatibility.
Adobe PostScript as performed in HP LaserJet 4000.
Small margin difference, rendering difference by
different font family, default and transfer function
difference are not to be included in the compatibility.
DIMM TYPE
168pin 3.3V Unbuffered SDRAM DIMM Non-ECC
DIMM capacity
64MByte, 128MByte, 256MByte
CAS LATENCY
CL=2
SDRAM CLOCK For PC100, PC133
SPD
Supporting
Parity
Not support
ECC
Not support
Manufacture
Capacity
Model name
RAM CHIP name
Note
Kingston
Technology
Technology
128MB
KVR133X64C3/
128
128
HYB39S64800BT
-7.5
-7.5
128MB
KVR133X64C3
-128
-128
D456821G-A75
-9JF
-9JF
256MB
KVR133X64C3
-256
-256
HY57V28820AT-H
Viking
Compornents
Compornents
64MB
VIK8641CL2
µPD456841G5
-A80-9JF
-A80-9JF
64MB
VIK8641CL2
D456841G5-A80
-9JF
-9JF
128MB
VIK6642CL2
TC59SM708FT-80
128MB
VIK6642CL2
D4564841G5-A80
-9JF
-9JF
256MB
VIK2642CL2
TC59SM708FT-80
Memory Card
Technology
Technology
64MB
DM864VS65804X
-7G
-7G
GM72V66841XT75
128MB
DM1665VS65804
X-7G
X-7G
HY57V64820HG
Scanner mode
Scan to E-mail (Internet FAX)
Scan to Server (Client PC)
Scan to Server (Client PC)
Embedded server
SMTP server
FTP server
FTP server
Protocol
TCP/IP
Format
TIFF, PDF, TIFF-F
Compression method
Uncompressed, G3(1-dimension) *1, G4 *2
*1 G3 (1-dimension) = MH (Modified Huffman)
*2 G4 = MMR (Modified MR)
*1 G3 (1-dimension) = MH (Modified Huffman)
*2 G4 = MMR (Modified MR)
DSPF/OC
transmission switching
transmission switching
O
(Switching during the reading is not feasible)
(Switching during the reading is not feasible)
!"#$%
AR-M350 SPECIFICATIONS 3-4
(5) Image Process
(6) Original Memory
(7) Specified Destination
(8) Specified Multiple Destinations
O : Available
(9) Functions
D. Copy function
(1) Copy Speed
*
Figures in reduction/enlargement are represented by those at the
ratio to show slowest speed
(2) First Copy Time
Conditions: A4 or 8.5"x11"P from front tray of PPC, without HDD and
with polygon motor running.
*1
During OC/high-speed mode
(3) Job Speed
*1 S
S : A4 / 8.5" x 11"P original 5 sheets
copy 5sets
*2 S
D : A4 / 8.5" x 11"P original 10 sheets
copy 5sets
*3 D
D : A4 / 8.5" x 11"P original 5 sheets (10 pages) copy 5sets
Note: First copy time has been factored into calculation resulting in
reduced CPM.
(4) Continuous Copy
(5) Copy Ratio
(6) Exposure/Copy Quality Process
Half tone reproduction Equivalent to 256 levels
Exposure adjustment
Exposure adjustment
Light / Auto / Dark
Quality selection
Half-tone ON/OFF
Resolution*
Normal ( 200x200dpi )
Fine ( 300x300dpi )
Super fine ( 400x400dpi )
Ultra fine ( 600x600dpi )
Varies with the file type/transmission method
Fine ( 300x300dpi )
Super fine ( 400x400dpi )
Ultra fine ( 600x600dpi )
Varies with the file type/transmission method
Standard
Commonly use ERDH area of memory.
Memory expansion
Special : As per ERDH memory
Specified destination
Specifying by one-touch or group
One-touch*
Max. 500 destinations
(in conjunction with the one-touch dial of FAX)
Max. 100 destinations can be registered
for FTP and Desktop.
(in conjunction with the one-touch dial of FAX)
Max. 100 destinations can be registered
for FTP and Desktop.
Group*
To be registered in one-touch
Program
O
Specified destination Specifying by one-touch or group
No. of registration
No. of registration
Max. 300 items
(in conjunction with those of FAX)
(in conjunction with those of FAX)
Sequential
broadcasting
broadcasting
O (
E-mail only. It is not available for FTP/Desktop.)
E-mail only. It is not available for FTP/Desktop.)
Simultaneous FAX
transmission
transmission
O (Specifying multiple destinations of FAX, E-mail or
FTP and broadcasting by a single scan)
FTP and broadcasting by a single scan)
Transmitting
functions
functions
Rotating transmission
O (to be matched with FAX
specification)
specification)
Long length original
transmission
transmission
X
Verification stamp function
Option
Report/list
functions
functions
Transmit/receive record
O
Transmit/receive result
O
Address/phone directory
list
list
O
Group list
O
ID/sender list
O
Program list
O
AR-M350
AR-M450
Actual Reduction Enlargement Actual Reduction Enlargement
A4,
8.5"x11"
8.5"x11"
35
35
35
45
45
45
A4R,
8.5"x11"R
8.5"x11"R
25
25
25
30
30
30
A5R,
5.5"x8.5"R,
Invoice-R
5.5"x8.5"R,
Invoice-R
35
35
35
45
45
45
B5
35
35
35
45
45
45
B5R,
Exective-R
Exective-R
25
25
25
30
30
30
B4,
8.5"x14"
8.5"x14"
20
20
20
22
22
22
A3,
11"x17"
11"x17"
17
17
17
20
20
20
Extra,
Envelope
Envelope
17
17
17
20
20
20
Japan P/C In case of printing on post card, engine speed can vary with system
configuration, because next paper is fed after machine completely output
previous page.
previous page.
AR-M350
AR-M450
Document glass *1
Less than 5.3 seconds Less than 4.6 seconds
DSPF
Less than 6.0 seconds Less than 5.3 seconds
AR-M350 AR-M450
S
S *1
33 cpm (94%)
42 cpm (93%)
S
D *2
32 cpm (91%)
40 cpm (88%)
D
D *3
32 cpm (91%)
40 cpm (88%)
Max. multiple number
999 pages
Copy ratio
AB series :
25%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 400%
Inch series :
25%, 64%, 77%, 100%, 121%, 129%, 400%
25%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 400%
Inch series :
25%, 64%, 77%, 100%, 121%, 129%, 400%
Zoom
25 - 400%
25 - 200% (Copy from DSPF)
25 - 200% (Copy from DSPF)
Independent
scaling
scaling
Not provided
Exposure mode
Binary: Text(auto/manual), Text/photo, Photo
256 levels: Not provided
256 levels: Not provided
Manual steps
9 steps
Smoothing
Standard
Toner save mode
Standard
' !"#$%
AR-M350 SPECIFICATIONS 3-5
(7) Copy Function
O : Standard Function
X : Not provided
X : Not provided
3. B/W Scanner Module (DSPF)
(1) Form
(2) Destination judgment
(3) Resolution / Gradation
(4) Document Glass
Function
APS O
AMS
AMS
O
Paper type select
O
By type setting
By type setting
Auto tray switching
O
Rotation copy
O
Electronic sort
O
Rotation sort
X
Reserved
copy O
Prior tray setting
X
Recall/register of program
O
Proof copy
X
Preheat function
O
To be set up by key
operator
To be set up by key
operator
Auto power shut-off function
O
To be set up by the key
operator program
operator program
Account control
O
100 accounts
100 accounts
Communication support (RIC)
O
Card counter support
Only
provided the connector
provided the connector
Coin vendor support
Only
provided the connector
provided the connector
Special
function
function
Margin shift
O
Edge erase / Center erase
O
Dual page copying
O
Covers
X
Transparency insert
X
Centering
X
Multi shot (N in 1)
O (2 in 1 / 4 in 1)
Pamphlet copy
O
2-sided copy orientation change
O
Large capacity original mode
0 (Max. 140 pages)
B/W reverse
X
Shading
X
Mirror image
X
Repeat
X
Date stamp
X
Stamp
X
Page stamp
X
Zaurus print
X
Scanner (Document glass) / DSPF standard
Operation panel integral type
(common hardware for all the destinations)
Operation panel integral type
(common hardware for all the destinations)
When connected with a base engine, the type (Japan domestic 100V,
overseas 100V or overseas 200V systems) is detected and the settings
will accordingly be changed.
overseas 100V or overseas 200V systems) is detected and the settings
will accordingly be changed.
Reading
resolution
(dpi)
resolution
(dpi)
Copy mode
Magnification
25~99
100
101~200 201~400
OC
600x600 600x600 600x600 600x600
OC
(High speed):
(High speed):
600x600 600x300 600x600 600x600
DSPF/
SPF(standard)
SPF(standard)
600x300 600x300 600x600
-
DSPF/SPF
(high quality)
(high quality)
600x600 600x600 600x600
-
Input and
transmitting
resolution
(dpi)
transmitting
resolution
(dpi)
FAX transmit mode
Selection mode Standard Fine
Selection mode Standard Fine
Super fine Ultra fine
Input
resolution: OC
resolution: OC
600x391.2 600x391.2 600x391.2 600x391.2
Input
resolution:
DSPF
resolution:
DSPF
600x300
600x300
600x300
600x300
Transmitting
resolution
resolution
203.2x97.8
203.2x195.6 203.2x391 406.4x391
Scanner mode
Selection mode Standard Fine
Selection mode Standard Fine
Super fine Ultra fine
Input
resolution: OC
resolution: OC
600x391.2 600x391.2 600x391.2 600x600
Input
resolution:
DSPF
resolution:
DSPF
600x300
600x300
600x300
600x300
Transmitting
resolution
resolution
200x200
300x300
400x400
600x600
Reading
level
level
256 tones
Exposure
lamp
lamp
Electrodeless xenon lamp
Output level
Binary
Reading
area
area
297x431.8(mm)
11.7"x17"
11.7"x17"
Original
alignment
alignment
Left edge / Rear corner alignment
Original size
detection
detection
Provided
(Standard size only)
(Standard size only)
Sizes to be
detected
detected
Automatic (one detection unit to be used with software
modification by destination)
Inch-1
(Default at overseas
100V base engine)
modification by destination)
Inch-1
(Default at overseas
100V base engine)
11"x17", 8.5"x14", 8.5"x11",
8.5"x11"R, 5.5"x8.5"
8.5"x11"R, 5.5"x8.5"
Inch-2
11"x17", 8.5"x13", 8.5"x11",
8.5"x11"R, 5.5"x8.5"
8.5"x11"R, 5.5"x8.5"
AB-1(Default at Japan
domestic 100V /
overseas 200V base
engines)
domestic 100V /
overseas 200V base
engines)
A3, B4, A4, A4R, B5, B5R,
A5A3, B4, A4, A4R, A5
A5A3, B4, A4, A4R, A5
AB-2
A3, A4R, A5, 216x330 mm
( !"#$%
AR-M350 SPECIFICATIONS 3-6
(5) DSPF/SPF
(6) Power Source
(7) Dimensions
(8) Display device at scanner part
(9) Key
(10) Touch sense method
(11) Used character in the LCD
4. Rack for Scanner
(1) Dimensions
OR guide
display
display
Rear left side
(Print display)
(Print display)
Original reference position "
"
Left side OR guide
(Print display)
(Print display)
(From the Interior side)
[5-1/2]•[A5E]•[B5E]•[A4E/A5]•
[8.5"]•[B4/B5]•[11"]•[A3/A4]
[5-1/2]•[A5E]•[B5E]•[A4E/A5]•
[8.5"]•[B4/B5]•[11"]•[A3/A4]
Interior side OR guide
(Print display)
(Print display)
(From the left side)
[5-1/2]•[A5]•[B5]•[A4/A5E]•
[8-1/2]•[B5E]•[11"]•[A4E]•[13"]•
[14"]•[B4]•[A3]•[17"]
[5-1/2]•[A5]•[B5]•[A4/A5E]•
[8-1/2]•[B5E]•[11"]•[A4E]•[13"]•
[14"]•[B4]•[A3]•[17"]
Interior side OR guide
Book marks are at A4 and
8-1/2 positions.
8-1/2 positions.
The position available to attach the staple position guide
label when the optional finisher (desktop console type) is
equipped.
label when the optional finisher (desktop console type) is
equipped.
Type
DSPF
One-scan-dual-side scanning
method DSPF with OC integrated
method DSPF with OC integrated
Scan speed Standard mode
45 opm
High quality mode
22.5 opm
Original
alignment
alignment
Center alignment
Original size A3, B4, A4, A4R, B5, B5R, A5, A5R11"x17", 8.5"x14",
8.5"x13", 8.5"x11", 8.5"x11"R,5.5"x8.5", 5.5"x8.5"R
(in Fax mode : long-length paper up to 800mm is
applicable)
(in Fax mode : long-length paper up to 800mm is
applicable)
Original
paper
weight
paper
weight
50~128g/m², 15~34lbs
Original
stack
capacity
stack
capacity
Max. 50 sheets
(max. 30 sheets for A3, B4,11"x17",8.5"x14")
(When, however, exceeding 105g/m²
and A3, B4,11"x17",8.5"x14", max. 15 sheets)
or, Total thickness less than
6.5mm (at 50~80g/m², 15~21lbs)
5.0mm (at 80~128g/m², 21~34lbs)
(max. 30 sheets for A3, B4,11"x17",8.5"x14")
(When, however, exceeding 105g/m²
and A3, B4,11"x17",8.5"x14", max. 15 sheets)
or, Total thickness less than
6.5mm (at 50~80g/m², 15~21lbs)
5.0mm (at 80~128g/m², 21~34lbs)
Not
transportable
original type
transportable
original type
Transparency film, secondary original paper,
tracing paper, carbon paper, thermal paper,
original with crumple/crimp/rip,
original with attachment/clipping,
original with many punch holes
(with 2 or 3 holes acceptable),
original preprinted with ink-ribbon.
tracing paper, carbon paper, thermal paper,
original with crumple/crimp/rip,
original with attachment/clipping,
original with many punch holes
(with 2 or 3 holes acceptable),
original preprinted with ink-ribbon.
Original size
detection
detection
Provided
Sizes to be
detected
detected
Automatic (one detection unit to be used with software
modification by destination)
Inch-1
(Default at overseas
100V base engine)
modification by destination)
Inch-1
(Default at overseas
100V base engine)
11"x17", 8.5"x14", 8.5"x11",
8.5"x11"R, 5.5"x8.5"
8.5"x11"R, 5.5"x8.5"
Inch-2
11"x17", 8.5"x13", 8.5"x11",
8.5"x11"R, 5.5"x8.5"
8.5"x11"R, 5.5"x8.5"
AB-1(Default at
Japan domestic
100V / overseas
200V base engines)
Japan domestic
100V / overseas
200V base engines)
A3, B4, A4, A4R, B5, B5R, A5, A3,
B4, A4, A4R, A5,
8.5"x11", 216x330 mm
B4, A4, A4R, A5,
8.5"x11", 216x330 mm
AB-2
A3, B4, A4, A4R, A5,
B5, B5R, 216x330 mm, 8.5"x11"
B5, B5R, 216x330 mm, 8.5"x11"
Original tray
guide
display
guide
display
Center of the tray
(inscribeddisplay)
(inscribeddisplay)
Original reference position "
"
Original face-down placement
indication "
indication "
"
Original Guide
(inscribed display)
(inscribed display)
(From Center)
[B5E]•[A4E/A5]•[8.5"]•[B4/B5]•
[11"]•[A3/A4]
[B5E]•[A4E/A5]•[8.5"]•[B4/B5]•
[11"]•[A3/A4]
The position available to attach the staple position guide
label when the optional finisher (desktop console type) is
equipped.
label when the optional finisher (desktop console type) is
equipped.
Supplied from the main unit
External dimensions
(WxDxH)
(WxDxH)
808 x 619x180 mm
Occupied space
dimensions (WxD)
dimensions (WxD)
945 x 619 mm
(When the tray is extended)
(When the tray is extended)
Weight
Approx. 19.5 kg
Type
Dot map LCD, touch panel
Display dot number
640 x 240 dots (dot pitch 0.24x0.24 mm)
LCD operating
dimension
dimension
153.5 x 57.5 mm
LCD back-light
Fluorescent tube method
LCD brightness
adjustment
adjustment
Provided
Mode selection area Job status key
Printer mode key
(online display LED/data in-memory display LED)
Scan/Fax mode key
(busy display LED/data in-memory display LED)
Copy mode key
User definition key
(online display LED/data in-memory display LED)
Scan/Fax mode key
(busy display LED/data in-memory display LED)
Copy mode key
User definition key
Basic input area
Start key
CA key
10-key
Clear key
* key
# key
CA key
10-key
Clear key
* key
# key
Resistive film method
Dot
8 x 16 , 16 x 16 dots
Bold display
O
Strength
60 kg
External dimensions
(WxDxH)
(WxDxH)
30 x 415 x 860 mm (Single goods)
Occupied space
dimensions (WxD)
dimensions (WxD)
575 x 415 mm (State of installation) (2pieces)
Weight
Approx.5 kg (2pieces)
* For the items which are not specified in this Service Manual, refer to the AR-P350/P450 Service Manual.
) !"#$%
Click on the first or last page to see other AR-M35 / AR-M450 (serv.man11) service manuals if exist.