Sharp AR-M35 / AR-M450 (serv.man11) Service Manual ▷ View online
AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-4
B. Print mode screen
This screen is displayed when the print mode is selected.
(The display varies with the mode. For the display in other modes)
1
Message display
A message is displayed in this column.
2
Job status screen
Refer to the text.
3
Print hold job list
If the job retention function is used, the list of stored print jobs is displayed here (up to 100 jobs).
The job retention function can be used only if the printer is equipped with a hard disk drive unit. If the main
switch is turned off, stored print data will be cleared.
The job retention function can be used only if the printer is equipped with a hard disk drive unit. If the main
switch is turned off, stored print data will be cleared.
4
Display scroll keys
Use these keys to view the job hold list when it is contained on more than one screen.
5
[CONDITION SETTINGS] key
Use to switch the display to the printer configuration menu.
SELECT JOB.
PRINT HOLD JOB LIST
Sharp 005
Sharp 006
Microsoft Word - Test001
EXCEL1
1/1
CONDITION
SETTINGS
1
2
3 4
5
) ! "#$%&
AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-5
C. Job status screen (common to print, copy, network scan, and fax modes)
This screen is displayed when the [JOB STATUS] key on the operation panel is pressed.
A job list showing the current job at the top of the job queue or a list showing completed jobs can be displayed.
The contents of the jobs can be viewed, moved up to the highest priority in the job queue or deleted from the queue.
*
"PAPER EMPTY" in the job status display
When a job status display indicates "PAPER EMPTY", the specified size paper is not loaded in any tray to run that job.
In this case, printing is suspended for that job until the required paper is loaded. Until the required paper is loaded another reserved job data will be
printed if possible.
(If paper runs out during printing, another job will not be printed.) If you wish to change the paper size because you do not have the specified size
(If paper runs out during printing, another job will not be printed.) If you wish to change the paper size because you do not have the specified size
paper, you can change the size by touching the current job key to select it and touch the [DETAIL] key described in 9
1
Job list
A job list which indicates the current job and reserved jobs or a job list which indicates completed jobs is displayed.
The icons to the left of the jobs in queue represent the job mode.
The icons to the left of the jobs in queue represent the job mode.
When a job list which indicates the current job and reserved jobs is displayed, the displayed jobs themselves are
operation keys. To cancel printing or to give a job the highest print priority, touch the relevant job key to select the job
and execute the desired operation using the keys described in 7,8, and 9
operation keys. To cancel printing or to give a job the highest print priority, touch the relevant job key to select the job
and execute the desired operation using the keys described in 7,8, and 9
2
Mode switching key
Use to switch the job list between "JOB QUEUE" and "COMPLETE".
"JOB QUEUE": Displays the list of the current job and the reserved jobs.
"COMPLETE": Displays the list of completed jobs.
"JOB QUEUE": Displays the list of the current job and the reserved jobs.
"COMPLETE": Displays the list of completed jobs.
3
[PRINT JOB] key
Use to display the print job list for all modes (print, copy, network scan, and fax).
4
[E-MAIL/FTP] key
Use to display the list of jobs that use the network for sending e-mail by SNMP protocol or sending to an ftp site or
desktop by ftp protocol.
desktop by ftp protocol.
5
[FAX JOB] key
Use to display the fax communication status and the reserved transmission job status.
6
Display switching keys
Use to switch the page of the displayed job list.
7
[STOP/DELETE] key
Use to cancel or delete the current job or delete the selected reserved job. Received fax print jobs that have been
reserved, however, cannot be deleted.
reserved, however, cannot be deleted.
8
[PRIORITY] key
If you select a job among the reserved jobs in the "JOB QUEUE" job list to which you wish to give the highest priority
and touch this key, the job will move to the highest priority reserved job.
and touch this key, the job will move to the highest priority reserved job.
9
[DETAIL] key
Use to display the detailed information of the selected job. The paper size for printing can be changed from the
specified size.This function, however, cannot be used when a fax reception print job is selected.
specified size.This function, however, cannot be used when a fax reception print job is selected.
JOB QUEUE
COPY
SHARP001
054234
COPYING
PAPER EMPTY*
WAITING
STATUS
003 / 000
PRINT JOB
E-MAIL/FTP
FAX JOB
JOB QUEUE
COMPLETE
DETAIL
PRIORITY
STOP/DELETE
003 / 000
010 / 000
1/1
SETS / PROGRESS
1
2
9
8
7
6
5
4
3
Print mode
Copy mode
Network scan mode
Fax mode (transmission job)
Fax mode (reception job)
! "#$%&
AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-6
4. Cross sectional view
5. Switch, Sensor
No.
Name
No.
Name
1
CIS unit (AR-EF1 only)
9
Original feed roller
2
Original resist roller
10
Copy lamp base unit
3
Original resist front sensor (SPSD)
11
No. 1 mirror
4
Original set sensor
12
Copy lamp (Xenon)
5
Original take-up sensor
13
Mirror base unit
6
Original length sensor 1 (SLD1)
14
No. 3 mirror
7
Original length sensor 2 (SLD2)
15
No. 2 mirror
8
CCD/lens unit
16
Original exit roller
Code
Name
Active condition
1
SPSD
SPF original resist front sensor
2
SCOV
SPF paper feed cover sensor
3
SDD
SPF original set sensor
4
SOCD
OC open/close sensor
5
Original size sensor PWB (Light emitting side)
6
SLD1
SPF original length sensor 1
7
SLD2
SPF original length sensor
8
SPF original width detection volume PWB
---
9
Original size sensor PWB (Light receiving side)
10
SSET
SPF open/close sensor
11
SPOD
SPF original exit sensor
12
MHPS
Mirror home position sensor
1
2
3 SPSD
4 SDD
5
6
7
8
9
10
11
12
13
14
15
16
7
1
2
3
4
5
6
8
9
10
11
12
* ! "#$%&
AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-7
6. PWB
7. Motor, Clutch, Solenoid
No.
Name
Function/Operation
1
SPF control PWB
SPF control
2
Original size detection PWB (Light emitting side)
Original size detection when using the table glass
3
CCD PWB (in lens unit) (The lens unit cannot be disassembled.)
Image scan (Table glass/SPF surface)
4
SPF original width detection volume PWB
SPF original width detection
5
MFP operation PWB
Panel operation control
6
LCD inverter PWB
Inverter for LCD backlight
7
LVDS PWB
LCD signal relay
8
Original size sensor (Light receiving side)
Original size detection when using the table glass
9
CIS unit (in CIS unit) (The CIS unit cannot be disassembled.)
Image scan (SPF back surface)
10
CIS interface PWB (in CIS unit) (The CIS unit cannot be disassembled.)
CIS signal AD conversion process
11
Scanner interface PWB
Scanner unit and connection of scanner control PWB
12
CIS control PWB
CIS unit control and image process
13
CL inverter PWB
Inverter for copy lamp
14
Scanner control PWB
Scanner unit control
No.
Name
Function/Operation
1
SPFM
SPF motor
Original transport in SPF scan
2
SPSC
SPF original resist clutch
SPF original scan timing adjustment
3
SPFC
SPF original feed clutch
SPF original feed roller drive
4
SDSS
SPF original stopper solenoid
SPF original stopper gate drive
5
MIRM
Mirror motor
Mirror base copy lamp base drive
6
SPFS
SPF original feed solenoid
SPF original feed unit drive
7
STMPS
Stamp solenoid
Finish stamp drive (Option AR-SU1 required)
1
14
2
3
4
5
6
7
8
9
10
11
12
13
7
1
2
3
4
5
6
+ ! "#$%&
Click on the first or last page to see other AR-M35 / AR-M450 (serv.man11) service manuals if exist.