DOWNLOAD Sharp AR-M316 (serv.man10) Service Manual ↓ Size: 14.14 MB | Pages: 127 in PDF or view online for FREE

AR-M256/M257/M258/M316/M317/M318/5625/5631  SIMULATION 8 - 51

Press the [START] key.

The confidential ID table (confidential BOX numbers, confidential BOX
names, and confidential password) is printed. 

The confidential data of My company mode is printed separately.

Note: Executable only when the FAX is installed.

Press the [START] key.

Used to input all image data (including confidential reception data,
remote send image, not-sent image) stored in image memory of the
FAX section.

The output image is remained even after outputting.

Note: Executable only when the FAX is installed.

Select “1: YES” with the 10-key and press the [START] key. (When “2:
NO” is selected, the simulation is canceled.)

Used to clear all image data (including confidential reception data)
stored in image memory of the FAX section.

The management table is also cleared (initialized) at the same time.

* lIf there is any print data, the power must be turned off after clearing.

Note: Executable only when the FAX is installed.

Select the signal number with the 10-key, and press the [START] key.

By setting the signal number, the specified signal is delivered to the
line at the speed of 300bps. (The signal is continuously sent until the
interruption command is provided by pressing the [CUSTOM SET-
TINGS] key.)

The signal send level can be selected from 0dB or the soft SW set value.

The signal send level is returned to the soft SW set value before execu-
tion of the mode after completion of the mode.

By entering the number and pressing the [START] key during execu-
tion, the signal kind can be changed.

Note: Executable only when the FAX is installed.

66-6

Data output, check

Printing the confidential password

FAX

Data Confidential/Pass 

code

66-7

Data output, check

Print the screen memory contents

FAX

Data Image 

data

 

1

 

1

66-10

Adjustment/Setting/Check

Image data memory clear

FAX

Data

Image data

66-11

Operation test/check

Used to send 300bps signals. 
(Signal send level: Max.)

FAX

Operation

Item

1

NO SIGNAL

2

11111

3

11110

4

00000

5

010101

6

00001

1

1

AR-M256/M257/M258/M316/M317/M318/5625/5631  SIMULATION 8 - 52

Select the signal number with the 10-key, and press the [START] key.

By setting the signal number, the specified signal is delivered to the
line at the speed of 300bps. (The signal is continuously sent until the
interruption command is provided by pressing the [CUSTOM SET-
TINGS] key.)

The signal send level can be selected from 0dB or the soft SW set value.

The signal send level is returned to the soft SW set value before execu-
tion of the mode after completion of the mode.

By entering the number and pressing the [START] key during execu-
tion, the signal kind can be changed.

Note: Executable only when the FAX is installed.

Enter the number with the 10-key, [*] key, and [#] key.

Press the [CLEAR] key to return to the initial state.

Press the [START] key to register the entered number.

Note: Executable only when the FAX is installed.

1.

Select the item with the 10-key, and press the [START] key.

2.

Set the make time with the 10-key.

The dial is sent with the set value + 26ms. 

The sending dial cannot be interrupted.

Note: Executable only when the FAX is installed.

1.

Select the item with the 10-key, and press the [START] key.

2.

Set the make time with the 10-key.

The dial is sent with the set value + 26ms. 

The sending dial cannot be interrupted.

Note: Executable only when the FAX is installed.

66-12

Operation test/check

Used to send 300bps signals. 
(Signal send level: Set by soft SW)

FAX

Operation

Item

1

NO SIGNAL

2

11111

3

11110

4

00000

5

010101

6

00001

66-13

Setting

Used to register the dial numbers.

FAX

Operation

 

1

 

66-14

Operation check/test

Used to perform the dial test. (10 PPS send test)

FAX

Operation

Item

Content

Setting range

0

EXECUTE

Execution

–

1

MAKE TIME

Dial pulse make time setting

0-15

66-15

Operation check/test

Used to perform the dial test. (20 PPS send test)

FAX

Operation

Item

Content

Setting range

0

EXECUTE

Execution

–

1

MAKE TIME

Dial pulse make time setting

0-15

1

1

AR-M256/M257/M258/M316/M317/M318/5625/5631  SIMULATION 8 - 53

1.

Select the item with the 10-key, and press the [START] key.

2.

Enter the set value with the 10-key.

The sending dial cannot be interrupted.

3.

Select the soft SW reflection.

Note: Executable only when the FAX is installed.

Enter the DTFM signal (1 digit (1 to 9, 0, *, #)) and press the [START] key. 

When the [CUSTOM SETTINGS] key is pressed during execution, the
simulation is terminated.

Note: Executable only when the FAX is installed.

Enter the DTFM signal (1 digit (1 to 9, 0, *, #)) and press the [START] key.

When the [CUSTOM SETTINGS] key is pressed during execution, the
simulation is terminated.

Note: Executable only when the FAX is installed.

Select “1: YES” with the 10-key, and press the [START] key. The data
are backed up. (When “2: NO” is selected, the simulation is canceled.)

* The AR-FX5 data cannot be written into the AR-FX7. If it is exe-

cuted, data are initialized and deleted. In addition, the AR-FX7 data
cannot be used in the AR-FX5.

Note: Executable only when the FAX is installed.

Select “1: YES” with the 10-key, and press the [START] key. The Flash
ROM data are read out and written into the SRAM. (When “2: NO” is
selected, the simulation is canceled.)

* The AR-FX5 data cannot be written into the AR-FX7. If it is exe-

cuted, data are initialized and deleted. In addition, the AR-FX7 data
cannot be used in the AR-FX5.

Note: Executable only when the FAX is installed.

1.

Select the item to be printed.

2.

Press the [START] key.

The information of the selected item is printed. 

Note: Executable only when the FAX is installed.

66-16

Operation check/test

Used to perform the dial test. (DTFM signal send test)

FAX

Operation

Item

Content

Setting 

range

0

EXECUTE

Execution

–

1

HIGH (SW)

High group

0-15

2

HIGH-LOW (SW)

High group, Low group

0-15

Item

Content

1

NO STORE TO SW

Not reflected.

2

STORE TO SW

Reflected. (Shift SW value changed.)

66-17

Operation check/test

Used to check the DTFM signal send operation. 
(Signal send level: Max.)

FAX

Operation

66-18

Operation check/test

Used to check the DTFM signal send operation. 
(Signal send level: Set by soft SW.)

FAX

Operation

1

66-19

Back up

Used to write the SRAM data to the Flash ROM. 

FAX

Data

66-20

Back up

Used to write the Flash ROM data to the SRAM.

FAX

Data

66-21

Check

FAX information print

FAX

Data

Item

Content

1

USER SW.LIST

User setting list

2

SOFT SW.LIST

Soft SW list

3

SYSTEM ERROR

System error list
Used to print the system error log (error 
number and time).

4

PROTOCOL

Protocol error list
Regardless of soft SW38-1 status, the 
protocol monitor of the preceding 
communication is printed. (Printing is 
allowed at any time before starting the 
next communication.) For this operation, 
the protocol monitor of one 
communication is always buffered.

 

AR-M256/M257/M258/M316/M317/M318/5625/5631  SIMULATION 8 - 54

Select “1: YES” with the 10-key and press the [START] key. The FAST
storage data are cleared. (When “2: NO” is selected, the simulation is
canceled.)

Note: Executable only when the FAX is installed.

When the relay state of the polarity reverse relay, the handset hook
switch, or the external telephone hook switch is changed, the content
of change is displayed regardless of the soft SW setup (real time). The
display of change is kept until an interruption command is supplied by
pressing the [CUSTOM SETTINGS] key. 

Note: Executable only when the FAX is installed.

1.

Enter the set value. (Valid only 0 to 8)

2.

The entered bit is alternatively switched between “0” and “1” and
the target signal name is highlighted.

3.

Press the [START] key to send the signal. 

When the [CUSTUM SETTINGS] key is pressed, the output is terminated.

Note: Executable only when the FAX is installed.

The fixed data received from the line are checked and the result is displayed. 

When data are coincident, “OK” is displayed. When not, “NG” is displayed. 

Note: Executable only when the FAX is installed.

Signal detection is checked and the result is displayed. 

Note: Executable only when the FAX is installed.

The send/receive test is performed, and the time required for send/
receive of the image data in the test is measured and displayed.

66-24

Data clear

Used to clear the FAST storage data. (SEC only)

FAX

Data Initializing

66-30

Operation test/check

Used to set the TEL/LIU.

FAX

Operation

Item

Notification contents

Signal low

Signal high

HS2

ON

OFF

HS1

ON

OFF

RHS

ON

OFF

EXHS

ON

OFF

66-31

Setting

Used to set the TEL/LIU.

FAX

Operation

66-32

Operation test/check

Receive data check

FAX

Operation

66-33

Operation test/check 

Signal detection check 

FAX

Operation

66-34

Operation test/check 

Communication time measurement display

FAX

Operation

Setup on the user 
side when executing 
communication

Communication 
means
Picture quality
Density
ECM
Sender information

: Memory send
: Normal Character
: Lighter
: ON
: OFF

Measuring 
range

Send

From flag reception before sending of image 
data until sending of RCP frame

Receive

From flag reception before reception of 
image data until reception of RCP frame

Mode when measuring

Used to make communication not in a 
simulation process but in the normal screen 
and measure the time.

00001

1   2   3   4   5