Sharp AR-M316 (serv.man10) Service Manual ▷ View online
AR-M256/M257/M258/M316/M317/M318/5625/5631 SIMULATION 8 - 35
TARGET = DEV REF+(LIFE-50)+(TH-50)
Developer adjustment value 128, life correction 60 (developer adjust-
ment value plus 10), environment correction 45 (5 subtraction correc-
tion), rapid toner supply correction = 128+(60-50)+(45-50) = 133.)
ment value plus 10), environment correction 45 (5 subtraction correc-
tion), rapid toner supply correction = 128+(60-50)+(45-50) = 133.)
Operation/procedure
1.
Touch the item to be set.
2.
Enter the set value with the 10-key.
To support an individual necessity in paper and the environment, it is
variable in the range of 5 to 30uA in the increment of 1uA in each mode.
variable in the range of 5 to 30uA in the increment of 1uA in each mode.
When changing +V2, check with +V1 unchanged. If there is any trouble
in the half tone image of graphics, keep the relationship between +V1
and +V2 at the default and change it.
in the half tone image of graphics, keep the relationship between +V1
and +V2 at the default and change it.
When the image quality is deteriorated because the user selects the
OHP mode and use other than the recommended OHP, decrease the
transfer current to adjust deterioration of black background picture qual-
ity. If some of characters are not printed, increase the transfer current.
OHP mode and use other than the recommended OHP, decrease the
transfer current to adjust deterioration of black background picture qual-
ity. If some of characters are not printed, increase the transfer current.
This setting is changed in linkage with SIM 26-6 destination setting.
*1: SECL/SCA/SEF/EX inch series/EX AB series/EX inch series (FC)/
EX AB series (FC)/China/Taiwan/SEEG2
*2: SEC/SEEG/SUK
TH
Toner container environment correction value
44-34
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the transfer current value in each mode.
Item
Content
Setting
range
Default
*1
*2
1 +V1F (145)
145mm/s normal paper >
B5R + V1 single surface.
Duplex (Front)
B5R + V1 single surface.
Duplex (Front)
5-30
5
5
2 +V1R (145)
145mm/s normal paper >
B5R + V1 Duplex (Back)
B5R + V1 Duplex (Back)
5-30
5
5
3 +V2F (145)
145mm/s normal paper >
B5R +V2 single surface.
Duplex (Front)
B5R +V2 single surface.
Duplex (Front)
5-30
18 20
4 +V2R (145)
145mm/s normal paper >
B5R +V2 Duplex (Back)
B5R +V2 Duplex (Back)
5-30
14 18
5 +V1S–F (145)
145mm/s normal paper
≤
B5R +V1 single surface.
Duplex (Front)
Duplex (Front)
5-30
5
5
6 +V1S–R (145)
145mm/s normal paper
≤
B5R +V1 Duplex (Back)
5-30
5
5
7 +V2S–F (145)
145mm/s normal paper
≤
B5R +V2 single surface.
Duplex (Front)
Duplex (Front)
5-30
22 22
8 +V2S–R (145)
145mm/s normal paper
≤
B5R +V2 Duplex (Back)
5-30
18 18
9 +V1 THICK (145)
145mm/s thick paper > LTR
+V1
+V1
5-30
5
5
10 +V2 THICK (145)
145mm/s thick paper > LTR
+V2
+V2
5-30
14 14
11
+V1 THICK S
(145)
(145)
145mm/s thick paper
≤ LTR
+V1
5-30
5
5
SIMULATION 44-14
12
+V2 THICK S
(145)
(145)
145mm/s thick paper
≤ LTR
+V2
5-30
18 18
13 +V1 THIN (145)
145mm/s thin paper > LTR
+V1
+V1
5-30
5
5
14 +V2 THIN (145)
145mm/s thin paper > LTR
+V2
+V2
5-30
18 18
15 +V1 THIN S (145)
145mm/s thin paper
≤ LTR
+V1
5-30
5
5
16 +V2 THIN S (145)
145mm/s thin paper
≤ LTR
+V2
5-30
18 18
17 +V1 LABEL (145)
145mm/s label paper > LTR
+V1
+V1
5-30
5
5
18 +V2 LABEL (145)
145mm/s label paper > LTR
+V2
+V2
5-30
18 18
19
+V1 LABEL S
(145)
(145)
145mm/s label paper
≤ LTR
+V1
5-30
5
5
20
+V2 LABEL S
(145)
(145)
145mm/s label paper
≤LTR
+V2
5-30
18 18
21 +V1 OHP (145)
145mm/s OHP > LTR +V1
5-30
5
5
22 +V2 OHP (145)
145mm/s OHP > LTR +V2
5-30
14 14
23 +V1 OHP S (145) 145mm/s OHP
≤ LTR +V1
5-30
5
5
24 +V2 OHP S (145) 145mm/s OHP
≤ LTR +V2
5-30
18 18
25
+V1 POSTCARD
(145)
(145)
145mm/s postcard/envelope
> 100mm +V1
> 100mm +V1
5-30
5
5
26
+V2 POSTCARD
(145)
(145)
145mm/s postcard/envelope
> 100mm +V2
> 100mm +V2
5-30
26 26
27
+V1 POSTCARD
S (145)
S (145)
145mm/s postcard/envelope
≤ 100mm +V1
≤ 100mm +V1
5-30
5
5
28
+V2 POSTCARD
S (145)
S (145)
145mm/s postcard/envelope
≤ 100mm +V2
≤ 100mm +V2
5-30
26 26
29 +V1F (122)
122mm/s normal paper >
B5R +V1 single surface.
Duplex (Front)
B5R +V1 single surface.
Duplex (Front)
5-30
5
5
30 +V1R (122)
122mm/s normal paper >
B5R +V1 Duplex (Back)
B5R +V1 Duplex (Back)
5-30
5
5
31 +V2F (122)
122mm/s normal paper >
B5R +V2 single surface.
Duplex (Front)
B5R +V2 single surface.
Duplex (Front)
5-30
12 14
32 +V2R (122)
122mm/s normal paper >
B5R +V2 Duplex (Back)
B5R +V2 Duplex (Back)
5-30
10 10
33 +V1S–F (122)
122mm/s normal paper
≤
B5R +V1 single surface.
Duplex (Front)
Duplex (Front)
5-30
5
5
34 +V1S–R (122)
122mm/s normal paper
≤
B5R +V1 Duplex (Back)
5-30
5
5
35 +V2S–F (122)
122mm/s normal paper
≤
B5R +V2 single surface.
Duplex (Front)
Duplex (Front)
5-30
14 14
36 +V2S–R (122)
122mm/s normal paper
≤
B5R +V2 Duplex (Back)
5-30
12 12
37
+V1 THICK
(122)
(122)
122mm/s thick paper > LTR
+V1
+V1
5-30
5
5
38
+V2 THICK
(122)
(122)
122mm/s thick paper > LTR
+V2
+V2
5-30
10 10
39
+V1 THICK S
(122)
(122)
122mm/s thick paper
≤ LTR
+V1
5-30
5
5
40
+V2 THICK S
(122)
(122)
122mm/s thick paper
≤ LTR
+V2
5-30
12 12
41 +V1 THIN (122)
122mm/s thin paper > LTR
+V1
+V1
5-30
5
5
42 +V2 THIN (122)
122mm/s thin paper > LTR
+V2
+V2
5-30
12 12
43 +V1 THIN S (122)
122mm/s thin paper
≤ LTR
+V1
5-30
5
5
44 +V2 THIN S (122)
122mm/s thin paper
≤ LTR
+V2
5-30
12 12
Item
Content
Setting
range
Default
*1
*2
AR-M256/M257/M258/M316/M317/M318/5625/5631 SIMULATION 8 - 36
Operation/procedure
Enter the set value with the 10-key, and press the [START] key.
Set the toner supply previous rotation time.
Operation/procedure
1.
Touch the item to be adjusted. (Automatic adjustment)
The currently set value is highlighted beside the adjustment item.
The currently set value is highlighted beside the adjustment item.
2.
Press the [START] key.
The display is shifted to the copy menu.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density.
Use the 10-key to set the exposure level.
Use the 10-key to set the exposure level.
4.
Press the [START] key.
Copying is started.
Copying is started.
(Exposure mode)
* Except for AE and AE (TS), only Level 3 can be set.
Note: When this simulation is canceled, the display returns to the initial
menu but the machine is not reset.
Operation/procedure
1.
Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
The adjustment item and the currently set value are highlighted.
2.
Press the [START] key.
The display is shifted to the copy menu.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density.
Use the 10-key to set the exposure level.
Use the 10-key to set the exposure level.
4.
Press the [START] key.
Copying is started.
Copying is started.
(Exposure mode (Text))
45 +V1 LABEL (122)
122mm/s label paper > LTR
+V1
+V1
5-30
5
5
46 +V2 LABEL (122)
122mm/s label paper > LTR
+V2
+V2
5-30
12 12
47
+V1 LABEL S
(122)
(122)
122mm/s label paper
≤ LTR
+V1
5-30
5
5
48
+V2 LABEL S
(122)
(122)
122mm/s label paper
≤ LTR
+V2
5-30
12 12
49 +V1 OHP (122)
122mm/s OHP > LTR +V1
5-30
5
5
50 +V2 OHP (122)
122mm/s OHP > LTR +V2
5-30
8
8
51 +V1 OHP S (122) 122mm/s OHP
≤ LTR +V1
5-30
5
5
52 +V2 OHP S (122) 122mm/s OHP
≤ LTR +V2
5-30
12 12
53
+V1 POSTCARD
(122)
(122)
122mm/s postcard/envelope
> 100mm +V1
> 100mm +V1
5-30
5
5
54
+V2 POSTCARD
(122)
(122)
122mm/s postcard/envelope
> 100mm +V2
> 100mm +V2
5-30
16 16
55
+V1 POSTCARD
S (122)
S (122)
122mm/s postcard/envelope
≤ 100mm +V1
≤ 100mm +V1
5-30
5
5
56
+V2 POSTCARD
S (122)
S (122)
122mm/s postcard/envelope
≤ 100mm +V2
≤ 100mm +V2
5-30
16 16
44-40
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the time from the start of the main motor
rotation (Ready) to the start of toner supply in previous
rotation after turning on the power.
rotation (Ready) to the start of toner supply in previous
rotation after turning on the power.
Setting range
1-99 (sec)
Default
4 (sec)
Item
Content
Setting
range
Default
*1
*2
SIMULATION 44-34
46
46-2
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to set the exposure level in each exposure mode.
Item
Picture quality
Density
Item
Content
Setting
range
Default
1 AE
AE
1-99
50
2 TEXT
Character
Level 3.0
3 TEXT/PHOTO
Character/Photo
Level 3.0
4 PHOTO
Photo
Level 3.0
5 AE(TS)
AE (TS)
6 TEXT(TS)
Character (TS)
Level 3.0
7 TEXT/PHOTO(TS) Character/Photo (TS) Level 3.0
46-9
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the shift amount and the inclination
value for each level (1 to 5) of the exposure mode
(Text).
value for each level (1 to 5) of the exposure mode
(Text).
Item
Picture quality
Density
Item
Content
Setting
range
Default
1 1.0 (SHIFT)
Character level 1.0 (shift q’ty)
1-99
22
2 1.0 (GAMMA)
Character level 1.0 (slant)
1-99
44
3 2.0 (SHIFT)
Character level 2.0 (shift q’ty)
1-99
36
4 2.0 (GAMMA)
Character level 2.0 (slant)
1-99
47
5 3.0 (SHIFT)
Character level 3.0 (shift q’ty)
1-99
50
SIMULATION 46-2
AR-M256/M257/M258/M316/M317/M318/5625/5631 SIMULATION 8 - 37
Note: When this simulation is canceled, the display returns to the initial
menu but the machine is not reset.
Operation/procedure
1.
Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
The adjustment item and the currently set value are highlighted.
2.
Press the [START] key.
The display is shifted to the copy menu.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density.
Use the 10-key to set the exposure level.
Use the 10-key to set the exposure level.
4.
Press the [START] key.
Copying is started.
Copying is started.
(Exposure mode (Text/Photo))
Note: When this simulation is canceled, the display returns to the initial
menu but the machine is not reset.
Operation/procedure
1.
Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
The adjustment item and the currently set value are highlighted.
2.
Press the [START] key.
The display is shifted to the copy menu.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density.
Use the 10-key to set the exposure level.
Use the 10-key to set the exposure level.
4.
Press the [START] key.
Copying is started.
Copying is started.
6 3.0 (GAMMA)
Character level 3.0 (slant)
1-99
50
7 4.0 (SHIFT)
Character level 4.0 (shift q’ty)
1-99
61
8 4.0 (GAMMA)
Character level 4.0 (slant)
1-99
55
9 5.0 (SHIFT)
Character level 5.0 (shift q’ty)
1-99
72
10 5.0 (GAMMA)
Character level 5.0 (slant)
1-99
60
11
TS 1.0
(SHIFT)
(SHIFT)
Character (TS) level 1.0
(shift q’ty)
(shift q’ty)
1-99
22
12
1TS 1.0
(GAMMA)
(GAMMA)
Character (TS) level 1.0
(slant)
(slant)
1-99
44
13
TS 2.0
(SHIFT)
(SHIFT)
Character (TS) level 2.0
(shift q’ty)
(shift q’ty)
1-99
36
14
TS 2.0
(GAMMA)
(GAMMA)
Character (TS) level 2.0
(slant)
(slant)
1-99
47
15
TS 3.0
(SHIFT)
(SHIFT)
Character (TS) level 3.0
(shift q’ty)
(shift q’ty)
1-99
50
16
TS 3.0
(GAMMA)
(GAMMA)
Character (TS) level 3.0
(slant)
(slant)
1-99
50
17
TS 4.0
(SHIFT)
(SHIFT)
Character (TS) level 4.0
(shift q’ty)
(shift q’ty)
1-99
61
18
TS 4.0
(GAMMA)
(GAMMA)
Character (TS) level 4.0
(slant)
(slant)
1-99
55
19
TS 5.0
(SHIFT)
(SHIFT)
Character (TS) level 5.0
(shift q’ty)
(shift q’ty)
1-99
72
20
TS 5.0
(GAMMA)
(GAMMA)
Character (TS) level 5.0
(slant)
(slant)
1-99
60
46-10
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the shift amount and the inclination
value for each level (1 to 5) of the exposure mode
(Text/Photo).
value for each level (1 to 5) of the exposure mode
(Text/Photo).
Item
Picture quality
Item
Content
Setting
range
Default
1
1.0 (SHIFT)
Character/Photo level 1.0
(shift q’ty)
(shift q’ty)
1-99
30
2
1.0 (GAMMA)
Character/Photo level 1.0
(slant)
(slant)
1-99
37
3
2.0 (SHIFT)
Character/Photo level 2.0
(shift q’ty)
(shift q’ty)
1-99
40
4
2.0 (GAMMA)
Character/Photo level 2.0
(slant)
(slant)
1-99
43
Item
Content
Setting
range
Default
5
3.0 (SHIFT)
Character/Photo level 3.0
(shift q’ty)
(shift q’ty)
1-99
50
6
3.0 (GAMMA)
Character/Photo level 3.0
(slant)
(slant)
1-99
50
7
4.0 (SHIFT)
Character/Photo level 4.0
(shift q’ty)
(shift q’ty)
1-99
57
8
4.0 (GAMMA)
Character/Photo level 4.0
(slant)
(slant)
1-99
61
9
5.0 (SHIFT)
Character/Photo level 5.0
(shift q’ty)
(shift q’ty)
1-99
64
10 5.0 (GAMMA)
Character/Photo level 5.0
(slant)
(slant)
1-99
66
11
TS 1.0
(SHIFT)
(SHIFT)
Character/Photo (TS) level 1.0
(shift q’ty)
(shift q’ty)
1-99
30
12
TS 1.0
(GAMMA)
(GAMMA)
Character/Photo (TS) level 1.0
(slant)
(slant)
1-99
37
13
TS 2.0
(SHIFT)
(SHIFT)
Character/Photo (TS) level 2.0
(shift q’ty)
(shift q’ty)
1-99
40
14
TS 2.0
(GAMMA)
(GAMMA)
Character/Photo (TS) level 2.0
(slant)
(slant)
1-99
43
15
TS 3.0
(SHIFT)
(SHIFT)
Character/Photo (TS) level 3.0
(shift q’ty)
(shift q’ty)
1-99
50
16
TS 3.0
(GAMMA)
(GAMMA)
Character/Photo (TS) level 3.0
(slant)
(slant)
1-99
50
17
TS 4.0
(SHIFT)
(SHIFT)
Character/Photo (TS) level 4.0
(shift q’ty)
(shift q’ty)
1-99
57
18
TS 4.0
(GAMMA)
(GAMMA)
Character/Photo (TS) level 4.0
(slant)
(slant)
1-99
61
19
TS 5.0
(SHIFT)
(SHIFT)
Character/Photo (TS) level 5.0
(shift q’ty)
(shift q’ty)
1-99
64
20
TS 5.0
(GAMMA)
(GAMMA)
Character/Photo (TS) level 5.0
(slant)
(slant)
1-99
66
46-11
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the shift amount and the inclination
value for each level (1 to 5) of the exposure mode
(Photo).
value for each level (1 to 5) of the exposure mode
(Photo).
Item
Picture quality
Density
Item
Content
Setting
range
Default
AR-M256/M257/M258/M316/M317/M318/5625/5631 SIMULATION 8 - 38
(Exposure mode (Photo))
Note: When this simulation is canceled, the display returns to the initial
menu but the machine is not reset.
Operation/procedure
1.
Select “1: COPY START.”
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Enter the set value of the exposure level with the 10-key, and press
the [#/P] key.
the [#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Select “1: COPY START.”
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Enter the set value of the exposure level with the 10-key, and press
the [#/P] key.
the [#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Select “1: COPY START.”
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Enter the set value of the exposure level with the 10-key, and press
the [#/P] key.
the [#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Item
Content
Setting
range
Default
1
1.0(SHIFT)
Photo level 1.0 (shift q’ty)
1-99
32
2
1.0(GAMMA)
Photo level 1.0 (slant)
50
3
2.0(SHIFT)
Photo level 2.0 (shift q’ty)
41
4
2.0(GAMMA)
Photo level 2.0 (slant)
50
5
3.0(SHIFT)
Photo level 3.0 (shift q’ty)
50
6
3.0(GAMMA)
Photo level 3.0 (slant)
50
7
4.0(SHIFT)
Photo level 4.0 (shift q’ty)
56
8
4.0(GAMMA)
Photo level 4.0 (slant)
61
9
5.0(SHIFT)
Photo level 5.0 (shift q’ty)
62
10
5.0(GAMMA)
Photo level 5.0 (slant)
66
46-12
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment
(1 mode automatic adjustment)
(1 mode automatic adjustment)
Section
FAX
Item
Image quality
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
JAM
PAPER EMPTY
Item
Setting range
Default
1
COPY START
–
–
2
FAX EXP.LEVEL
0-99
50
5 0
1
46-13
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment
(Normal mode individual adjustment)
(Normal mode individual adjustment)
Section
FAX
Item
Image quality
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
JAM
PAPER EMPTY
Item
Content
Setting range
Default
1 COPY START Copy start
–
–
2 EXP.LEVEL
Exposure level selection
0-99
50
3 AE
Normal text AE
4 MANUAL
Normal text MANUAL
46-14
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment
(Fine text mode individual adjustment)
(Fine text mode individual adjustment)
Section
FAX
Item
Image quality
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START
Copy start
–
–
2
EXP.LEVEL
Exposure level selection
0-99
50
3
AE (PHOTO ON)
Fine text AE (Half tone)
4
AE (PHOTO OFF)
Fine text AE
5
MANUAL
(PHOTO ON)
(PHOTO ON)
Fine text MANUAL
(Half tone)
(Half tone)
6
MANUAL
(PHOTO OFF)
(PHOTO OFF)
Fine text MANUAL
1
Click on the first or last page to see other AR-M316 (serv.man10) service manuals if exist.