Sharp AR-M201 (serv.man10) User Manual / Operation Manual ▷ View online
TROUBLESHOOTING AND MAINTENANCE
75
8
3
Gently pull the toner
cartridge out while pressing
the lock release lever.
cartridge out while pressing
the lock release lever.
4
Remove the toner cartridge from the bag. Grasp the cartridge
on both sides and shake it horizontally four or five times. After
shaking the cartridge, remove the toner seal.
on both sides and shake it horizontally four or five times. After
shaking the cartridge, remove the toner seal.
5
Gently insert the toner cartridge
along the guides until it locks in
place while pushing the lock release
lever. Remove the tape from the
shutter. Pull the shutter out of the
toner cartridge as shown in the
illustration. Discard the shutter.
along the guides until it locks in
place while pushing the lock release
lever. Remove the tape from the
shutter. Pull the shutter out of the
toner cartridge as shown in the
illustration. Discard the shutter.
• After removing the toner cartridge, do not shake it or tap on it. Doing
so may cause toner to leak from the cartridge. Put the old cartridge
immediately in the bag contained in the box of the new cartridge.
immediately in the bag contained in the box of the new cartridge.
• Dispose of the old toner cartridge in accordance with local
regulations.
Grasp the toner cartridge as shown in the illustration. Do not hold the
cartridge by the shutter. Be sure to only shake the cartridge before the
toner seal is removed.
cartridge by the shutter. Be sure to only shake the cartridge before the
toner seal is removed.
Toner cartridge lock release lever
Note
4 or 5 times
Shutter
Toner seal
Note
!AR-M201.book 75 ページ ２００８年２月１２日 火曜日 午後７時４１分
TROUBLESHOOTING AND MAINTENANCE
76
6
Close the front cover and
then the side cover by
pressing the round
projections near the side
cover open button. The error
indicator will go out and the
ready indicator will light up.
then the side cover by
pressing the round
projections near the side
cover open button. The error
indicator will go out and the
ready indicator will light up.
7
SCAN HEAD LOCKING SWITCH
The scan head locking switch is under the original table. If the switch is locked (
)
,
the machine will not operate. Unlock the switch (
) as shown below.
To lock the scan head locking switch, hold up the catch in illustration
and turn the
centre knob counter-clockwise 90 degrees until you hear a click.
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
Even after a new toner cartridge is installed, the start (
) indicator
may not light up, indicating copying cannot be restarted (toner is not
sufficiently fed). In this case, open and close the side cover. The copier
will feed toner again approximately 2 minutes and then copying can be
restarted.
sufficiently fed). In this case, open and close the side cover. The copier
will feed toner again approximately 2 minutes and then copying can be
restarted.
Caution
Note
Lock
Unlock
Grasp here and turn in
the direction of the arrow.
the direction of the arrow.
A
A
!AR-M201.book 76 ページ ２００８年２月１２日 火曜日 午後７時４１分
77
8
CHECKING THE TOTAL COUNT
You can check the total number of pages output by the machine (all pages printed by
the copy function and printer function), as well as the output counts of each function
(number of copies, number of scanned pages, number of faxes, etc.). When a count
reaches 999,999 it returns to 0.
the copy function and printer function), as well as the output counts of each function
(number of copies, number of scanned pages, number of faxes, etc.). When a count
reaches 999,999 it returns to 0.
1
Press the [MENU] key.
Press the [
Press the [
] key (
) or [
] key (
)
until "TOTAL COUNT" appears, and then
press the [ENTER] key.
press the [ENTER] key.
2
Press the [
] key (
) or [
] key (
) to
display the count of each function.
The count of each function changes as follows each the [
] key (
) or
[
] key (
)is pressed:
• "TOTAL OUTPUT":
Total number of pages output by the machine
• "COPIES":
Total number of copies
• "SPF/RSPF":*
1
Total number of pages scanned using the
RSPF
RSPF
• "2-SIDED PRINT":
Total number of pages printed by two-sided
print
• "PRINTS":
Total number of pages printed the printer
function
function
• "FAX":*
2
Total number of sent and received faxes
• "FAX SEND":*
2
Total number of sent faxes
• "SCAN SEND":
Total number of scans
• "TONER REMAINING":
The approximate amount of toner remaining
in the toner cartridge is displayed as a
percentage.
in the toner cartridge is displayed as a
percentage.
*
1
When an RSPF is installed.
*
2
When the optional Facsimile Expansion Kit is installed.
MAINTENANCE REQUIRED
When the error indicator will blink and "MAINTENANCE REQUIRED CALL FOR
SERVICE" will appear in the display, service by an authorised SHARP service
technician is required. Contact your authorised service representative as soon as
possible.
SERVICE" will appear in the display, service by an authorised SHARP service
technician is required. Contact your authorised service representative as soon as
possible.
MAIN MENU
3:TOTAL COUNT
3:TOTAL COUNT
TOTAL OUTPUT
012,345
012,345
!AR-M201.book 77 ページ ２００８年２月１２日 火曜日 午後７時４１分
78
CLEANING THE MACHINE
Proper care is essential in order to get clean, sharp copies. Be sure to take a few
minutes to clean the machine on a regular basis.
minutes to clean the machine on a regular basis.
Cabinet
Wipe the cabinet with a soft, clean cloth.
Document glass and the back side of the original cover/RSPF
Stains on the glass, RSPF scanning window, cover or RSPF roller will also be
copied. Wipe the glass, RSPF scanning window, cover and RSPF roller with a soft,
clean cloth. If necessary, dampen the cloth with a glass cleaner.
copied. Wipe the glass, RSPF scanning window, cover and RSPF roller with a soft,
clean cloth. If necessary, dampen the cloth with a glass cleaner.
Do not spray flammable cleaner gas. Gas from the spray may
come in contact with the internal electrical components or high-
temperature parts of the fusing unit, creating a risk of fire or
electrical shock.
come in contact with the internal electrical components or high-
temperature parts of the fusing unit, creating a risk of fire or
electrical shock.
• Before cleaning, be sure to turn the power switch off and remove
the power cord from the outlet.
• Do not use thinner, benzene or other volatile cleaning agents.
Doing so may cause deformation, discoloration, deterioration or
malfunction.
malfunction.
Warning
Caution
Document glass/scanning window
Original cover/RSPF
RSPF roller
RSPF scanning window
Black line
If this area is dirty, copying from the RSPF will
not be possible.
not be possible.
!AR-M201.book 78 ページ ２００８年２月１２日 火曜日 午後７時４１分
Click on the first or last page to see other AR-M201 (serv.man10) service manuals if exist.