DOWNLOAD Sharp AR-M201 (serv.man10) Service Manual ↓ Size: 4.09 MB | Pages: 96 in PDF or view online for FREE

4

AUTO SHUT-OFF 
TIME

1: 5 MIN.
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.

• This function automatically 

switches the machine to a state 
that consumes even less power 
than preheat mode if the set 
duration of time elapses without 
the machine being used when 
the power is on. All lights except 
the power save indicator  go off. 
To resume normal operation, 
press the [START] key (

). 

Normal operation also resumes 
automatically when a print job is 
received or scanning is begun 
from a computer. While in auto 
power shut-off mode, no keys 
(except the [START] key (

)) 

can be used.

7

LAYOUT  IN  2IN1

1: PATTERN 1
2: PATTERN 2

• Use this setting to select the 

layout pattern when two original 
pages are copied onto a single 
sheet of paper (see page 31 for 
the layout patterns).

8

OFFSET 
FUNCTION

1: ON
2: OFF

• When enabled, this function 

offsets the position of each 
set of copies in the output tray 
in copy mode, and each print 
job in printer mode.

9

ROTATE ORIG. 
IMAGE

1: ON
2: OFF

• When two-sided copying is 

performed, this function rotates 
the image on the back of the 
original. This is convenient 
when binding the copies at the 
top (tablet binding).

10

AE/TEXT 
RESOLUTION

1: 300dpi
2: 600dpi

• This setting is used to change 

the copy resolution in AUTO and 
TEXT mode from 600 x 300 dpi 
to 600 x 600 dpi (high-quality 
mode). Scanning is slower 
when high-quality mode is used.

Setting codes
(factory default

setting appears

in bold)

!AR-M201.book  55 ページ  ２００８年２月１２日　火曜日　午後７時４１分

11

2-SIDED COPY 
MODE

1: HI-SPEED
2: NORMAL

• If the memory fills up when two-

sided copying is performed, 
"NORMAL" can be selected to 
make copying possible. 
However, "NORMAL" results in a 
slower copying speed. Normally 
"HI-SPEED" is selected to 
enable fast two-sided copying.

12

MARGIN WIDTH

1: 5 mm (1/4")
2: 10 mm (1/2")
3: 15 mm (3/4")
4: 20 mm (1")

• Use this setting to set the 

margin width.

13

MEM. FOR 
PRINTER

1: 30%
2: 40%
3: 50%
4: 60%
5: 70%

• Use this to change the 

proportion of machine 
memory used for printer 
mode.

14

AUTO KEY 
REPEAT

1: ON
2: OFF

• Use this setting to select 

whether or not holding down a 
key causes repeated input of 
the key. For keys that normally 
cause a set value to decrease 
or increase when held down 
(for example, the [

] key 

(

) or [

] key (

)), this 

program can be used to have 
the set value not change 
when the key is held down.

15

KEY PRESS TIME

1: NORMAL
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.

• Use this setting to select how 

long a key must be pressed 
for the input to be accepted. 
By selecting a longer time, 
you can prevent settings from 
being changed by the 
accidental pressing of a key.

16

KEY TOUCH 
SOUND

1: LOW
2: HIGH
3: OFF

• This sets the volume of beep 

signals. (p.60) 

17

SOUND AT 
DEFAULT

1: ON
2: OFF

• Use this to sound a beep 

when a base setting is 
selected. (p.60)

18

TONER SAVE 
MODE

1: ON
2: OFF

• This mode reduces toner 

usage by about 10% when 
copying. Toner save mode is 
effective when the exposure 
mode is AUTO or TEXT.

Setting codes
(factory default

setting appears

in bold)

!AR-M201.book  56 ページ  ２００８年２月１２日　火曜日　午後７時４１分

19

AE LEVEL ADJUST

1: SPF/RSPF

(Adjustment to 
5 levels is 
possible.)

2: DOCUMENT 

GLASS
(Adjustment to 
5 levels is 
possible.)

• This is used to adjust the 

exposure level.

• The automatic exposure level can 

be adjusted separately for the 
document glass and the RSPF.

• For the procedure for adjusting 

the exposure and guidelines 
for numeric values, see page 
24. The factory default setting 
for the exposure level is centre.

20

LANGUAGE

2: ENGLISH
3: FRENCH
4: SPANISH

• This is used to set the 

language used in the display.

21

RESET FACTORY

1: YES
2: NO

• This is used to return all settings 

to the factory default settings.

22

SORT AUTO 
SELECT

1: ON
2: OFF

• Use this setting to enable or 

disable sort auto select mode.

24

• CHECK OC 

OPEN

• CHECK RSPF 

OPEN (When an 
RSPF is 
installed.)

1: ON
2: OFF

• You can set the operation that 

takes place if the [START] key 
(

) is pressed when the 

original cover/RSPF is not 
completely closed. (For 
details on the "Check original 
cover/RSPF open function", 
see page 14.)

25

VALID COPY 
WIDTH

1: A4 (8.5x11)
2: B5R (5.5x8.5)

• Set the allowed paper sizes 

for copying from the bypass 
tray. When "B5R (5.5x8.5)" is 
selected, a copy of an A4 
(letter) size original will only 
be printed up to B5R (invoice) 
size.

28

LSU SETTING

1: ON
2: OFF

• Select whether copying is only 

allowed when the polygon 
motor is rotating, or also when 
the polygon motor is stopped.

29

PAPER TYPE

1: PLAIN PAPER
2: HEAVY PAPER

• Set the temperature of the 

fusing unit when the bypass 
tray is used.

30

DISPLAY 
CONTRAST

1: LIGHTER
2: LIGHT
3: NORMAL
4: DARK
5: DARKER

• Set the contrast of the display.

Setting codes
(factory default

setting appears

in bold)

!007-user settings.fm  57 ページ  ２００８年３月６日　木曜日　午前９時４６分

 *

1

The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", 
however, the printing speed does not increase considerably.

 *

2

When the 250-sheet paper feed unit is installed.

Setting codes
(factory default

setting appears

in bold)

1

FORCED 
OUTPUT

1: ON
2: OFF

• When this function is enabled, 

printing in printer mode will 
automatically continue using a 
different size of paper if the 
specified size of paper runs 
out in all trays. This feature 
does not function in copy 
mode.

2

USB 2.0 MODE 
SWITCH*

1

1: FULL-SPEED
2: HI-SPEED

• This sets the USB 2.0 data 

transfer speed. To obtain the 
fastest speed when using the 
USB 2.0 connector, first verify 
that your computer meets the 
system requirements 
(operating system and driver), 
and then use this program to 
change the USB 2.0 mode to 
"Hi-Speed". Note that the 
setting should not be changed 
while running a TWAIN driver. 
(For the system requirements, 
see "System requirements for 
USB 2.0 (Hi-Speed mode)" 
(p.49).)

3

AUTO TRAY 
SWITCH*

2

1: ON
2: OFF

• If the paper runs out during 

printing and there is paper of 
the same size in another tray, 
this function automatically 
switches to that tray 
(excluding the bypass tray). 
The function can be disabled.

!AR-M201.book  58 ページ  ２００８年２月１２日　火曜日　午後７時４１分