Sharp AR-M165-207 (serv.man17) Service Manual ▷ View online
AR-M207 M165 M162 DISASSEMBLY AND ASSEMBLY 10-17
C. 2nd tray paper entry sensor / Paper empty sensor
D. 2nd tray paper feed solenoid / Transport solenoid
E. 2nd tray transport clutch
F. 2nd tray transport roller
G. 2nd tray paper feed clutch
H. 2nd tray paper feed roller
(1)
(2)
(3)
(5)
(3)
(4)
(A)
(B)
(A) 2nd tray paper entry sensor
(B) Paper empty sensor
(B) Paper empty sensor
(1)
(2)
(2)
(1)
(2)
(1)
(1)
(1)
(2)
(3)
A
B
(3)
A
(1)
(2)
(1)
(2)
[10]DISASSEMBLY.fm 17 ページ ２００４年１１月１２日 金曜日 午後２時１７分
AR-M207 M165 M162 DISASSEMBLY AND ASSEMBLY 10-18
I. Main motor
J. I/F P.W.B.
K. Paper entry sensor
L. Paper empty sensor
M. Paper feed roller
* When removing the paper feed roller, operate the paper feed clutch
with SIM 6-1, and keep the paper feed roller down as shown in the
figure above for operation.
(1)
(2)
(1)
(2)
(3)
(1)
(2)
(3)
(2)
(2)
(2)
(1)
(2)
(3)
(1)
(1)
(2)
(3)
(1)
(2)
[10]DISASSEMBLY.fm 18 ページ ２００４年１１月１２日 金曜日 午後２時１７分
AR-M207 M165 M162 KEY OPERATOR PROGRAM 11-1
[11]KEY OPERATOR PROGRAM
1. Custom setting
KEY OPERATOR PROGRAM
Set value(Default)
Remark
KEY OPERATOR
NUMBER
CHANGE
NUMBER
CHANGE
KEY OPERATOR NUMBER CHANGE
00000
ACCOUNT
CONTROL
CONTROL
AUDITING MODE
Copy, Printer and
Scanner
Scanner
TOTAL/ACCOUNT
RESET ACCOUNT
Reset 1 Account,
Reset All Account
Reset All Account
ACCOUNT NUMBER CONTROL
Enter, Delete, Change
Account Number
Account Number
ACCOUNT LIMIT
Single Account Limit,
All Account Limit
All Account Limit
ACCOUNT NUMBER SECURITY
No (No warning)
CANCEL JOBS OF INVALID ACCOUNT
Cancel (Not inhibited)
DEVICE
CONTROL
CONTROL
WAITING COPY LAMP SETTING
ON*/OFF
OFFSET FUNCTION
UPPER TRAY,
CENTER TRAY
CENTER TRAY
Enable (The function works.)
MEMORY FOR PRINTER
30, 40, 50*, 60, 70%
USB2.0 MODE
Full speed mode*/High speed mode
RETURN FROM COPY MODE TIMING
0, 10, 30*, 60sec
OPERATION
SETTINGS
SETTINGS
AUTO CLEAR
0, 10, 20, 60*, 90, 120sec
DISABLE DISPLAY TIMEOUT
Unchecked
LANGUAGE SETTING
MESSAGE TIME
Short (3sec), Normal (6sec)*, Long (9sec)
KEY TOUCH SOUND
Low*, High, Off
KEY TOUCH SOUND AT INITIAL POINT
Off (Check box unchecked)
KEY PRESS TIME
Minimum* 0.5, 1.0, 1.5, 2.0sec
DISABLE AUTO KEY REPEAT
OFF (The auto repeat functions.)
DISABLE PAPER SIZE SET
OFF (Paper size setting can be made.)
ENERGY SAVE
AUTO POWER SHUT-OFF
On (Check box is checked)
AUTO POWER SHUT-OFF TIMER
5*, 30, 60, 120, 240min
PREHEAT MODE
1*, 5, 30, 60, 120, 240min
TONER SAVE MODE
excluding U.K
NETWORK
SETTING
SETTING
DHCP enable
ON (Automatic acquisition of IP address)
when the AR-NB3
is installed
is installed
IP address enable
TCP/IP enable
ON (Protocol enable)
NetWare enable
ON (Protocol enable)
EtherTalk enable
ON (Protocol enable)
NetBEUI enable
ON (Protocol enable)
COPY SETTING
EXPOSURE ADJUST
Original glass,
Document feeder
Document feeder
Level 1, 2, 3*, 4, 5
MARGIN DEFAULT
AB system: 0, 5, 10*, 15, 20mm
Inch system: 0, 1/4, 1/2*, 3/4, 1inch
Inch system: 0, 1/4, 1/2*, 3/4, 1inch
ERASE ADJUST
AB system: 0, 5, 10*, 15, 20mm
Inch system: 0, 1/4, 1/2*, 3/4, 1inch
Inch system: 0, 1/4, 1/2*, 3/4, 1inch
CARD SHOT DEFAULT
AB system Y: 54mm, X: 86mm
Inch system Y: 2 1/8inch, X: 3 3/8inch
Inch system Y: 2 1/8inch, X: 3 3/8inch
DEFAULT TRAY SET
Tray 1*, 2, 3, 4, BYPASS TRAY
DEFAULT EXPOSURE
Auto*, TEXT, PHOTO
STREAM FEEDING
Check box unchecked
ROTATION COPY
Check box checked
SORT AUTO SELECT
No sort, Sort*
RESOLUTION IN AUTO/TEXT MODE
300*, 600dpi
PHOTO MODE DEFAULT
Pattern 1*, 2
LIMIT OF COPIES
99, 999*copies
DISABLE AUTO PAPER SELECTION
Check box unchecked
DISABLE 2-SIDED COPY
Check box unchecked
[11]KEYOPERATOR.fm 1 ページ ２００４年１１月１２日 金曜日 午後２時１８分
AR-M207 M165 M162 FLASH ROM VERSION UP PROCEDURE 12-1
[12]FLASH ROM VERSION UP PROCEDURE
1. Preparation
Write the download data (the file with the extension dwl) to the main body
of AR-M207/M162/M165.
Necessary files for download
•Maintenance.exe (Maintenance software)
•ProcModelH.mdl
•ProcModelH.fmt
•ProcModelH.ini
•ProcModelH.ini
Driver
•Drivers\2kXP\Mainte.inf (For XP/2000)
•Drivers\Win9xME\Mainte.inf (For ME/98)
•Drivers\Win9xME\UsbScan.sys (For ME/98)
•Drivers\Win9xME\UsbScan.sys (For ME/98)
Download File
•Download File:***.dwl
<Note>
• When creating a folder for a maintenance tool in the PC, be sure that no
lengthy folder name is included in the path.
(Example)
Incorrect c:\Maintenance Download Tool
Correct c:\Maintenance\Downtool
Correct c:\Maintenance\Downtool
2. Driver Installation procedure
<Note>
When the driver for the AR-M205/M160 is already installed, there is no
need to install the driver.
need to install the driver.
A. USB joint maintenance program installation
The driver is installed by plug and play.
B. Installation procedure on Windows XP
1) Machine
side:
Executable by performing the Service Simulation No. 49-01 (Flash
Rom program-writing mode).
(A word “Download mode.” appears on the operation panel to denote
the download mode status. )
the download mode status. )
2) Connect the machine and the PC with a USB cable.
(Be sure to connect the USB cable to the main unit side. Connection
to the optional dual function board cannot execute this function.)
3) Check that the following display is shown.
Select "Install from a list or the specific location" and press the [Next]
button.
button.
4) Select "Include this location in the search". If the retrieval area does
not include the folder which includes the maintenance tool driver
(Mainte.inf), select [Browse] button.
If the folder path is properly shown, press the [Next] button to go to
If the folder path is properly shown, press the [Next] button to go to
procedure (7).
5) Select the folder which includes the maintenance tool driver
(Mainte.inf), and press the [OK] button.
(When the driver is included in the
“C:\Maintenance Tool\Divers\2kxp”folder:)
“C:\Maintenance Tool\Divers\2kxp”folder:)
6) Check that the path to the folder which includes the maintenance tool
driver (Mainte.inf) is shown, and press the [Next] button.
[12]FLASHROM.fm 1 ページ ２００４年１１月１２日 金曜日 午後２時１９分
Click on the first or last page to see other AR-M165-207 (serv.man17) service manuals if exist.