DOWNLOAD Sharp AR-FX11 Service Manual ↓ Size: 4.8 MB | Pages: 84 in PDF or view online for FREE

AR-FX11 SPECIFICATIONS 3-2

FAST system support 

PSTN supporting FAST

- SEC only

Report/List 
function

Account control 
record 

Yes.

Enter junk fax 
number list

Yes.

Transaction report Yes.
Confidential 
registration  list

Yes.

Transmission 
cancel list

Yes.

Others

Account control

50 accounts.

Transmission time

2 seconds (level: Super G3 /33600bps).
6 seconds (G3 ECM/14400bps).

Modem speed

33.6kbps -> 2.4kbps automatic fallback

Intercommunication

Super G3 / G3.

Communicationline

General telephone line (PSTN), Private branch 
(PBX), Fax line.

ECM

Yes.

R-Key

Available only for SEEG (with PBX setting). 

Max. record width

293mm.

Record size

A3 - A5 (depends on destination).
11” x 17” - 5.5” x 8.5” (depends on destination).

Sub address

Yes.

Passcode

Yes.

[03]SPECIFICATIONS.fm  2 ページ  ２００４年１１月１６日　火曜日　午前９時１１分

AR-FX11 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-1

1 Page pallet

These are used in fax mode.

2 Display

This key displays the base screen and the function setting screen.

3 [BACK] key

In a setting or programming screen, this key is used to move back to the previous screen.

4 [FAX STATUS] key

This is used to cancel a fax transmission or a stored fax transmission.

5 [OK] key

This key is used to enter a setting that has been selected with the arrow or other keys.

6 Numeric keys

These are used to enter fax numbers, sub-addresses, passcodes, and numerical settings.

7 [C] key

This is used to clear a mistake when entering fax numbers, sub-addresses, passcodes, and numerical settings. One digit 
is cleared each time the key is pressed.When an original is being scanned, this key can also be used to cancel scanning.

8 [CA] key

This is used to cancel a transmission or programming operation. When pressed during an operation, the operation is 
canceled and the display returns to the base screen described on page *4 - 3*.This key is also used to cancel a resolution, 
paper size, or special function setting that was selected when sending a fax.

9 [SPEAKER/SHIFT] 

key

This is used to dial without lifting the handset and to shift between upper and lower case when entering characters.

10 [REDIAL/PAUSE] key

This is used to redial the last number dialed, and enter a pause when entering a fax number.

11 [SPEED/SYMBOL] 

key

This is used to dial by Speed dialing and to enter a symbol when entering characters.

12 [COMM. SETTING/

SPACE/-] key

This is used to switch between memory transmission and direct transmission, and to switch between automatic reception 
and manual reception. It is also used to enter a space or "-" when entering characters.

13 Information lamp

Information lamp blinks, when facsimile is received, or when the paper remains in the tray.

ON LINE DATA

LINE

DATA

SCAN

FAX

PRINT

26

27

28

29

30

31

32

33

34

35

41

42

43

44

45

46

47

48

49

50

36

37

38

39

40

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

T

S

U

V

W

XYZ

SP

SPEAKER

SHIFT

REDIAL/PAUSE

SPEED

SYMBOL

COMM. SETTING

SPACE/–

COPY

[04]ETERNALVIEWS.fm  1 ページ  ２００４年１１月１２日　金曜日　午後２時２３分

AR-FX11 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-2

NOTE
• When the auto power shut-off function is activated, All lights except the mode key lights go off. For the information on the auto power shut-off function.

14 [MODE SELECT] keys These are used these keys to change modes.
15 [FAX] key/

FAX indicator/LINE 
indicator/DATA 
indicator

Press to switch to fax mode. The base screen of fax mode will appear in the display. The LINE indicator lights up during 
transmission or reception of a fax. When a fax has been received, the DATA indicator blinks. (When there is fax 
transmission data in memory, the DATA indicator lights up.)

16 [PROGRAM] key

Press this key to use a program.

17 [RESOLUTION] key

This key is used to select resolution and exposure settings.

18 [ADDRESS] key

This key is used to search for a fax destination that has been stored as an auto-dial number in the address book.

19 [BROADCAST] key

This is used to perform a broadcast transmission.

20 [ORIGINAL SIZE] key

This is used to set the size of the original to be faxed.

21 [DUPLEX SCAN] key

Press this key to use the duplex scan function. (Only on models with a SPF installed.)

22 [SPECIAL 

FUNCTION] key

This key is used to select a special transmission or reception function, configure function settings, and to store auto-dial 
numbers.

23 Arrow keys

These are used to select items and move through pages.

24 [START] key

This is used at the following times:
(1) When starting transmission
(2) When scanning an original
(3) When starting manual reception
(4) When configuring and storing settings

25 [ACC.#-C] key

Press the end the use of an account and return the display to the account number entry screen.

26 [READ-END] key

When copying in sort mode from the document glass, press this key when you have finished scanning the original pages 
and are ready to start copying.

ABC

DEF

JKL

GHI

MNO

TUV

PQRS

WXYZ

@.-_

COPY EXPOSURE

PAPER

ZOOM

AUTO %

OUTPUT

DUPLEX

SPECIAL FUNCTION

ACC. #-C

READ-END

SCAN

FAX

COLOR MODE

PROGRAM

RESOLUTION
RESOLUTION

ADDRESS

FORMAT ORIGINAL SIZE DUPLEX SCAN

DUPLEX SCAN

ORIGINAL SIZE

ADDRESS BROADCAST

OK

BACK

FAX STATUS

ABC

DEF

JKL

GHI

MNO

TUV

PQRS

WXYZ

@.-_

COPY EXPOSURE

PAPER

SELECT

COPY
RATIO

AUTO

IMAGE

OUTPUT

2-SIDED

COPY

SPECIAL FUNCTION

ACC. #-C

READ-END

SCAN

FAX

COLOUR MODE

PROGRAM

FORMAT

BROADCAST

OK

BACK

FAX STATUS

RESOLUTION ADDRESS

ORIGINAL SIZE DUPLEX SCAN

[04]ETERNALVIEWS.fm  2 ページ  ２００４年１１月１２日　金曜日　午後２時２３分

AR-FX11 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-3

The base screen of fax mode is displayed by pressing the [FAX] key when the print mode, copy mode, or scan mode

screen appears.

NOTE

The following functions operate even when copy mode is selected:
• Automatic reception (including F-code confidential reception)

• Timer Transmission

• Memory polled function
• Transmission of stored memory transmission jobs

• Voice calls (voice calls can be answered but not placed).

• Remote reception

• Manual reception
• Relay station function for F-code relay broadcast transmission

1

Message display

Messages appear here to indicate the current status of the machine. An icon appears to the right side when a 
confidential fax has been received.

2

Date and time display

This shows the date and time.

3

Transmission mode display

There are three transmission modes: memory transmission, direct transmission, and manual transmission.
This shows the currently selected transmission mode.

4

Exposure display

This shows the exposure for scanning the original that has been selected with the [RESOLUTION] key.

5

Resolution display

This shows the resolution for scanning the original that has been selected with the [RESOLUTION] key.

6

Free memory display

This shows the percentage of fax memory that is free.

7

Reception mode display

There are two modes for receiving faxes:
automatic reception and manual reception. This shows the currently selected reception mode.

8

Original display

This displays an icon to indicate the original scanning mode when an original has been placed.

: One-sided original scanning in the SPF.
: Document glass.
: Two-sided original scanning in the RSPF.

This also shows the size of the placed original.

Stand-by.        96%
MAY 10 MON  10:25 AM

   MEMORY    AUTO
 CONT        8 x11R
 STANDARD

AUTO

2

3

4

5

1

7

8

6

1

2

[04]ETERNALVIEWS.fm  3 ページ  ２００４年１１月１２日　金曜日　午後２時２３分