Sharp AR-C330 (serv.man5) Service Manual ▷ View online
AR-C330 SETUP 4 - 4
C. Accessories
Accessories for each destination
*1: One of two toner collection containers is installed to the machine when shipping. The installed one has no cap.
*2: The Key sheet for Europe is included in the Operation Manual Kit.
*3: The Operation Manual and the key operator guide are separate for USA. For the other destinations, they are bound together into one.
Operation Manual kit
4. Lock release
Destination
USA
Canada
U.K.
Other Europe
OPC drum x 4 pcs
Installed when shipping
Installed when shipping
Installed when shipping
Installed when shipping
Toner collecting container x 2 *1
Installed when shipping
Installed when shipping
Installed when shipping
Installed when shipping
Toner collection container for transfer belt
Installed when shipping
Installed when shipping
Installed when shipping
Installed when shipping
Original cover
Option
Option
Option
Option
Paper exit tray
Option
Option
Option
❍
Installed language ROM (Default)
English
English
English
English
(Installed language)
Set with SIM 26-22.
Set with SIM 26-22.
German
German
German
German
French
French
French
French
Spanish
Spanish
Spanish
Spanish
Italian
Italian
Italian
Italian
Dutch
Dutch
Dutch
Dutch
Swedish
Swedish
Swedish
Swedish
Norway
Norway
Norway
Norway
Finland
Finland
Finland
Finland
Denmark
Denmark
Denmark
Denmark
Key sheet
English
English/French
English
None *2
Paper tray size display sheet
Inch series x 3
Inch series x 3
AB series x 3
AB series x 3
Operation Manual
English
English/French
English
None *3
Delivery and installation report
✕
✕
✕
❍
Maintenance card
❍
❍
❍
❍
Maintenance sheet
❍
❍
❍
❍
Polyethylene sheet
❍
❍
❍
❍
Polyethylene gloves
❍
❍
❍
❍
Polyethylene bags
❍
❍
❍
❍
MSDS card
❍
❍
❍
✕
Energy star mark
❍
❍
❍
❍
ECP label
❍
❍
✕
✕
Warranty registration
✕
✕
❍
✕
Language
Model name
Content
Note
English
AR-33SE
Operation Manual
(Bound together
with Key Operator
Guide), Operation
panel sheet
(Bound together
with Key Operator
Guide), Operation
panel sheet
25 sets
Germany
AR-33SG
French
AR-33SF
Spanish
AR-33SS
Italian
AR-33SI
Dutch
AR-33SH
Swedish
AR-33SW
Norway
AR-33SN
Finland
AR-33SA
Denmark
AR-33SD
No.
Parts name
1
No. 2/3 mirror base lock screw
2
Belt unit fixing screw B
3
Tray rotating plate fixing material
4
Fusing, transfer unit fixing screw A
5
Paper guide lock screw
2
4
4
5
1
3
AR-C330 SETUP 4 - 5
A. External fitting section
1) Remove the fixing tape and packing material from the copier
body.
B. Scanner section
1) Release the No. 2/3 mirror unit lock.
(Remove the fixing screw, washer, and note label of No. 2/3
mirror unit on the left side.)
mirror unit on the left side.)
C. Transfer section
1) Open the front cover (1), and remove the toner hopper unit (2).
2) Remove the connector (3).
3) Remove the blue screw (1), and remove the toner hopper unit
(2).
[Paper exit side]
[Paper feed side]
1
2
3
1
2
AR-C330 SETUP 4 - 6
4) Loosen the blue screw (1), and remove the process frame
cover (2).
5) Remove the unit fixing screw (1), and hold the lever (2) to
remove.
6) Loosen the blue screw (1), and remove the fusing front cover
(2) in the arrow direction.
7) Remove the unit fixing screw B (1) and the unit fixing screw A
(2).
8) Remove the fusing front paper guide fixing screw (1) and the
protector (2).
Keep the removed screw in the screw hole in the transfer sec-
tion. When in transit of the machine, fix the fusing front paper
guide with this screw.
tion. When in transit of the machine, fix the fusing front paper
guide with this screw.
9) Remove the fixing material.
1
2
1
2
1
2
1
1
2
AR-C330 SETUP 4 - 7
D. Fusing and paper exit section
1) Insert and press the front side shaft (1) with a screwdriver.
2) Insert and press the rear side shaft (2) with a screwdriver.
E. Paper feed, paper transport section
1) Remove the rotating plate fixing material of the paper feed tray,
and remove the caution label.
5. Cleaning
A. Main charger
1) Open the front cover.
2) Remove the toner hopper unit.
3) Remove the process frame cover.
4) Press the main charger unit hook section and releaser the lock.
Remove the main charger unit (1) from the copier.
5) Remove the electrode section fixing screw (2) of the main
charger unit (1), and remove the electrode section (3).
6) Clean the tip of the electrode by pushing the electrode cleaner
through it. (Repeat 2 or 3 times.)
(Note)
Do not move the cleaner when it is pushed through the
cleaner. When cleaning, clean the whole area evenly.
cleaner. When cleaning, clean the whole area evenly.
7) Install the electrode section to the original position, and fix it
with the fixing screw.
8) Insert the main charger unit fully into the machine along the
copier guide.
2
1
1
1
2
3
Click on the first or last page to see other AR-C330 (serv.man5) service manuals if exist.