DOWNLOAD Sharp AR-C330 (serv.man14) Service Manual ↓ Size: 5.24 MB | Pages: 127 in PDF or view online for FREE

Specifications

Optional equipment

Document cover (AR-VR2)
Reversing automatic document feeder (AR-RF1)
20-bin staple sorter (AR-SS2)
Finisher (AR-FN4)
Large capacity tray (AR-LC9)
Exit tray (AR-TE1)
Fiery print controller (AR-PE3)
Print engine power supply unit (AR-PX5)

Colour

33 copies/min. (A4 (8-1/2" x 11"))

22 copies/min. (A4R (8-1/2" x 11"R))

17 copies/min. (B4 (8-1/2" x 14"))
15 copies/min. (A3 (11" x 17"))

Black/White

33 copies/min. (A4 (8-1/2" x 11"))

22 copies/min. (A4R (8-1/2" x 11"R))
17 copies/min. (B4 (8-1/2" x 14"))
15 copies/min. (A3 (11" x 17"))

Colour

9.4 sec.

Black/White

13.7 sec.

●

The values in the table above are achieved under the following conditions:
1. Paper feed station: First tray
2. Paper size: A4 (8-1/2" x 11"), portrait orientation
3. Setting of “Transfer Belt Position” key operator program: COLOUR
4. Pre-scan is not performed. The polygon motor is operating. The copier is not in the preheat mode.
5. The first-copy time immediately after the preheat mode is 19.5 sec.

NOTE:
When copying onto special paper such as transparency film or thick paper, the copying speed will be
slower and the first copy will take longer to complete.

Printing mode

Standby mode

Black/White

Colour

Sound power level L

wA

6.8B

6.8B

5.5B

Ozone

0.02 mg/m

3

 or less

Dust

0.075 mg/m

3

 or less

Styrene

0.07 mg/m

3

 or less

As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may be some deviations from these
values in individual units.

Specifications

Acceptable originals

Single-sided originals: 50 to 128 g/m

2 

(14 to 34 lbs.)

Weight:

Two-sided originals: 50 to 128 g/m

2 

(14 to 34 lbs.) for A5 to A4

(5-1/2" x 8-1/2" to 8-1/2" x 11") originals.
50 to 110 g/m

2 

(14 to 29 lbs.) for B4 to A3 (8-1/2" x 14" to 11"

x 17") originals.

Size:

A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")

Capacity:

Up to 50 sheets for A5 to A4 (5-1/2" x 8-1/2" to 8-1/2" x 11")

originals provided the total aggregate thickness does not exceed
6.5 mm or 1/4" (50 to 80 g/m

2

 (14 to 21 lbs.)) or 5 mm or 3/16" (80 to

128 g/m

2 

(21 to 34 lbs.)).

Up to 30 sheets for B4 to A3 (8-1/2" x 14" to 11" x 17") originals

Paper type

Ordinary paper only

Number of copies

1 (trayless system)

Copy paper size

A5, A4, A4R, B4, A3 (7-1/4" x 10-1/2"R, 8-1/2" x 11", 8-1/2" x 11"R,
8-1/2" x 14", 11" x 17")
In some regions, 216 mm x 330 mm (8-1/2" x 13") size paper can
be used in place of B4 (8-1/2" x 14") .

Copy paper weight

60 to 105 g/m

2

 (15 lbs. to 28 lbs.)

This chapter describes operating instructions for the 20-Bin Staple Sorter
(AR-SS2), Large Capacity Tray (AR-LC9) and Finisher (AR-FN4).

                                      Page

●

●

●

●

●

SYSTEM CONFIGURATION .......................... 7-2

●

●

●

●

●

20-BIN STAPLE SORTER (AR-SS2) .................... 7-3

Part names ...................................... 7-3

Using the staple sorter .............................. 7-4

Sorter capacity .................................... 7-5

Staple sort ....................................... 7-6

Manual stapling ................................... 7-8

Staple cartridge replacement .......................... 7-9

Staple jam removal ................................ 7-11

Misfeed removal .................................. 7-13

Specifications .................................... 7-14

●

●

●

●

●

LARGE CAPACITY TRAY (AR-LC9) ................... 7-15

Part names ..................................... 7-15

Specifications .................................... 7-15

Loading copy paper ............................... 7-16

Misfeed removal .................................. 7-17

●

●

●

●

●

FINISHER (AR-FN4) ............................... 7-19

Part names ..................................... 7-19

Specifications .................................... 7-19

Offset stack ..................................... 7-20

Staple print ...................................... 7-21

Staple cartridge replacement ......................... 7-22

Staple jam removal ................................ 7-24

Misfeed removal .................................. 7-26

The options which are available for this copier are shown below.

System configuration

Document cover (AR-VR2)

Reversing automatic
document feeder (AR-RF1)

20-bin staple sorter (AR-SS2)

Large capacity tray (AR-LC9)

Finisher (AR-FN4)

Print engine power supply unit (AR-PX5)
Fiery Print Controller (AR-PE3)

The operation manuals for the Print Controller are
supplied with this controller.

Exit tray
(AR-TE1)