Sharp AR-C330 (serv.man14) User Manual / Operation Manual ▷ View online
5-7
CHAPTER
5
MISFEED REMOVAL
COPIER TROUBLE?
Misfeed removal
4
Open the upper right side cover to check to see if any
paper is misfed.
paper is misfed.
1
Grasp the handle and open the cover.
2
If any misfed paper is seen, turn roller rotating knob
A
in the
direction of the arrow to feed the misfed paper into the copier.
3
Gently close the upper right side cover.
Caution
5
Pull out the paper transport.
6
Remove any misfed paper from the paper transport.
●
If misfed paper has been fed into the copier in step 4 or paper has
misfed on the transport belt, gently remove misfed paper not to
touch the belt.
misfed on the transport belt, gently remove misfed paper not to
touch the belt.
Roller rotating knob A
5-8
CHAPTER
5
MISFEED REMOVAL
If the misfed paper is in the fusing unit:
1
Open the fusing unit cover in the direction of the arrow.
CAUTION
The fusing unit is hot. Use care in removing paper.
2
Turn roller rotating knob
B
in the direction of the arrow to
remove the misfed paper.
NOTE:
Be sure to turn roller rotating knob
Be sure to turn roller rotating knob
B
only in the direction of the
arrow. If the knob is turned in the opposite direction, the copier may
malfunction.
malfunction.
3
Return the fusing unit cover securely to its original position.
7
Push the paper transport back securely into the copier
and turn the transport lever back.
and turn the transport lever back.
8
Close the front cover.
●
Confirm that the misfeed display is cleared.
COPIER TROUBLE?
Misfeed removal
Roller rotating knob B
5-9
CHAPTER
5
MISFEED REMOVAL
COPIER TROUBLE?
Misfeed removal
Misfeed in the duplex module
NOTES:
●
For misfeed removal from an optional staple sorter (AR-SS2), an
optional large capacity tray (AR-LC9) or an optional finisher (AR-
FN4), please refer to chapter 7 Optional Equipment.
optional large capacity tray (AR-LC9) or an optional finisher (AR-
FN4), please refer to chapter 7 Optional Equipment.
●
If any other misfeed locations are indicated, be sure to remove any
misfed paper from these locations before pulling out the duplex
module. If not, a sheet of paper in another location may become torn
and difficult to remove.
misfed paper from these locations before pulling out the duplex
module. If not, a sheet of paper in another location may become torn
and difficult to remove.
1
Open the left side cover.
2
Remove the misfed paper.
3
Close the left side cover.
4
Pull out the duplex module.
MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
5-10
CHAPTER
5
COPIER TROUBLE?
Misfeed removal
MISFEED REMOVAL
5
Remove the misfed paper.
●
Turn roller rotating knob
C
in the direction of the arrow and
remove the misfed paper.
●
Slide the paper guide if needed.
6
Push the duplex module back into the copier.
Roller rotating knob C
Click on the first or last page to see other AR-C330 (serv.man14) service manuals if exist.