Sharp AR-C330 (serv.man14) User Manual / Operation Manual ▷ View online
4-9
CHAPTER
4
SUPPLIES
Storage of supplies
GENUINE SUPPLIES
STORAGE OF SUPPLIES
The supplies of this copier replaced by the user include copy paper,
toner, toner collecting container, and staple cartridges for the optional
staple sorter (AR-SS2) and the finisher (AR-FN4).
toner, toner collecting container, and staple cartridges for the optional
staple sorter (AR-SS2) and the finisher (AR-FN4).
For best copying results, be sure to use
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
Photoconductive drum
AR-C330 has advanced process control technology which improves
copy quality uniformity. This feature stabilizes copy quality throughout
the life of the photoconductive drum by automatically compensating
for the changes in drum characteristics due to wear, operator use
patterns, and environmental conditions. The automatic adjustments
are made in response to a sensor that detects the reflectance
characteristics of the drum.
copy quality uniformity. This feature stabilizes copy quality throughout
the life of the photoconductive drum by automatically compensating
for the changes in drum characteristics due to wear, operator use
patterns, and environmental conditions. The automatic adjustments
are made in response to a sensor that detects the reflectance
characteristics of the drum.
WARNING
This feature requires drums containing the special reflectance area
(recommended Sharp genuine photoconductive drum), to prevent
low image density copies from poor process control and possible
damage to the machine. If you use other drums, the process control
system cannot run properly.
(recommended Sharp genuine photoconductive drum), to prevent
low image density copies from poor process control and possible
damage to the machine. If you use other drums, the process control
system cannot run properly.
Proper storage
1
Store the supplies in a location that is:
●
clean and dry,
●
at a stable temperature,
●
not exposed to direct sunlight.
2
Store copy paper in the wrapper and lying flat.
●
Paper stored in packages standing up or out of the wrapper
may curl or become damp, resulting in paper misfeeds.
may curl or become damp, resulting in paper misfeeds.
3
Store a new toner cartridge box horizontally. Do not
store it standing on end. If stored standing on end, the
toner may not distribute well even after shaking the
cartridge vigorously, and will remain inside the cartridge
without flowing out.
store it standing on end. If stored standing on end, the
toner may not distribute well even after shaking the
cartridge vigorously, and will remain inside the cartridge
without flowing out.
Supply and Consumables
The supply of spare parts for a repair of the appliance is guaranteed for at least 7 years following the termination
of production. Spare parts are those parts of the apparatus which may break down within the scope of the ordinary
use of the product - whereas those parts which normally exceed the life of the product are not to be considered
as spare parts. Consumables too, are available for 7 years following the termination of production.
The supply of spare parts for a repair of the appliance is guaranteed for at least 7 years following the termination
of production. Spare parts are those parts of the apparatus which may break down within the scope of the ordinary
use of the product - whereas those parts which normally exceed the life of the product are not to be considered
as spare parts. Consumables too, are available for 7 years following the termination of production.
5-1
CHAPTER
5
CHAPTER 5
COPIER TROUBLE?
This chapter describes how to remove misfed originals and paper and
other common trouble remedies.
other common trouble remedies.
Page
●
●
●
●
●
MISFEED REMOVAL ............................... 5-2
●
●
●
●
●
MAINTENANCE REQUIRED ........................ 5-11
●
●
●
●
●
TONER COLLECTING CONTAINER OF TRANSFER UNIT .. 5-12
●
●
●
●
●
TROUBLESHOOTING ............................. 5-13
5-2
CHAPTER
5
Misfeed in the optional RADF
When the optional RADF misfeeds an original sheet, the copier will
stop and the misfeed message will appear.
stop and the misfeed message will appear.
An original misfeed may occur at one of three locations:
(A) in the RADF feed section, (B) in the exit roller, or (C)
under the transport belt.
(A) in the RADF feed section, (B) in the exit roller, or (C)
under the transport belt.
MISFEED REMOVAL
When a misfeed occurs, the copier will stop.
The message “MISFEED HAS OCCURRED. CLEAR
INDICATED AREA. PRESS
The message “MISFEED HAS OCCURRED. CLEAR
INDICATED AREA. PRESS
FOR RECOVERY
INSTRUCTIONS.
” will appear with a display of paper
misfeed locations. Press the INFORMATION (
) key
for more detailed information as necessary.
If paper becomes accidentally torn during removal, be
sure to remove all pieces. Be careful not to damage the
photoconductive drum or the corona wires.
sure to remove all pieces. Be careful not to damage the
photoconductive drum or the corona wires.
First confirm the misfeed locations.
For misfeeds in an optional staple sorter, see page 7-13.
For misfeeds in an optional large capacity tray, see page
7-17.
For misfeeds in an optional finisher, see page 7-26.
For misfeeds in an optional staple sorter, see page 7-13.
For misfeeds in an optional large capacity tray, see page
7-17.
For misfeeds in an optional finisher, see page 7-26.
COPIER TROUBLE?
Misfeed removal
MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
( P. 5-2)
( P. 5-3)
( P. 5-3, 5-6)
( P. 5-5)
( P. 5-6)
( P. 5-9)
A
B
C
Click on the first or last page to see other AR-C330 (serv.man14) service manuals if exist.