Sharp AR-C330 (serv.man14) User Manual / Operation Manual ▷ View online
4-5
CHAPTER
4
The message “
TONER SUPPLY IS LOW.
” will appear in
the message display before the toner supply is completely empty.
(
(
indicate toner types.
Y
: yellow,
M
: magenta,
C
: cyan,
BK
:
black) If copying is continued, copies will gradually become lighter until
the copier stops and the message display changes to “ADD
TONER. PRESS
the copier stops and the message display changes to “ADD
TONER. PRESS
.
” indicating that the toner supply is empty. Toner
can be added any time after the message “
TONER SUPPLY IS
LOW.
” appears. To add toner, stop the copier and proceed as
below. When either message appears, you can use the INFORMATION
(
(
) key for detailed information as necessary.
If any colour toner supply is empty, colour copying cannot be performed.
Black/white copying, however, can be performed unless the black
toner supply is empty.
During long copy runs of multiple originals containing many images
and/or dark shades, “TONER REPLENISHMENT IN PROGRESS.”
may appear and the copier may stop making copies even though
toner is left.
The copier will automatically cycle and replenish the toner to the
normal level and then the START (
Black/white copying, however, can be performed unless the black
toner supply is empty.
During long copy runs of multiple originals containing many images
and/or dark shades, “TONER REPLENISHMENT IN PROGRESS.”
may appear and the copier may stop making copies even though
toner is left.
The copier will automatically cycle and replenish the toner to the
normal level and then the START (
) key indicator will light up. Press
the START (
,
) key to resume copying.
SUPPLIES
Adding toner
ADDING TONER
For best copying results, be sure to use
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
1
Open the front cover.
2
Push the lock release buttons on both sides of the toner
box and pull the toner box out slowly until it stops.
box and pull the toner box out slowly until it stops.
●
The toner hoppers are located as below.
GENUINE SUPPLIES
Yellow
Cyan
Magenta
Black
4-6
CHAPTER
4
3
Tap on the top of the new toner cartridge 5 times. Then
hold the toner cartridge horizontally and vigorously
shake it sufficiently about 20 times. This will loosen the
toner and allow it to flow more easily into the toner
hopper.
hold the toner cartridge horizontally and vigorously
shake it sufficiently about 20 times. This will loosen the
toner and allow it to flow more easily into the toner
hopper.
CAUTION
Be sure to perform these steps. If not, toner may not flow easily into
the toner hopper.
the toner hopper.
4
Place the new toner cartridge with the protrusions into
the notches of the relevant toner hopper as shown.
the notches of the relevant toner hopper as shown.
●
The left example shows the toner hopper of black toner.
5
Slide the toner cartridge along the guides over the toner
hopper.
hopper.
6
Hold the toner cartridge with one hand while pulling on
the sealing tape to remove it.
the sealing tape to remove it.
●
It will take about 40 seconds for the cartridge to empty.
ADDING TONER
SUPPLIES
Adding toner
Sealing tape
5 x
20 x
4-7
CHAPTER
4
ADDING TONER
7
Tap on the top of the toner cartridge to ensure that the
cartridge completely empties.
cartridge completely empties.
CAUTION
Be sure to perform this step. If not, some toner may be scattered
when the cartridge is removed.
when the cartridge is removed.
8
Slide the empty toner cartridge back along the guides
and remove it.
and remove it.
●
The cartridge opening will be closed as it is moved back along
the guides.
the guides.
9
Push the toner box back into the copier.
10
Close the front cover.
NOTE:
Add only one cartridge of the colour toner indicated as being low or
empty.
Add only one cartridge of the colour toner indicated as being low or
empty.
SUPPLIES
Adding toner
4-8
CHAPTER
4
1
Open the toner collecting container cover.
●
Push once on the door to unlatch and open it.
2
Disengage and remove the container from the copier.
●
Toner cannot be reused. Do not transfer used toner to the toner
hopper.
hopper.
●
Remove the cap from a new toner collecting container and use
it to seal the full toner collecting container.
it to seal the full toner collecting container.
●
Keep the full toner collecting container until the next regular
service call. Your authorised Sharp Service Technician will
collect the container for disposal.
service call. Your authorised Sharp Service Technician will
collect the container for disposal.
3
Install a new toner collecting container until it clicks into
place.
place.
4
Close the toner collecting container cover.
USED TONER DISPOSAL
“REPLACE USED TONER CONTAINER. PRESS FOR GUIDANCE.”
will appear when the toner collecting container is full.
The copier will stop and will not operate until a new container has been
installed. Replace the toner collecting container as described below.
When the above message is displayed, you can use the INFORMATION
(
will appear when the toner collecting container is full.
The copier will stop and will not operate until a new container has been
installed. Replace the toner collecting container as described below.
When the above message is displayed, you can use the INFORMATION
(
) key for detailed information as necessary.
SUPPLIES
Used toner disposal
New container
Removed container
Click on the first or last page to see other AR-C330 (serv.man14) service manuals if exist.