Sharp AR-C200P (serv.man4) Service Manual ▷ View online
AR-C200P Rev.5
29 /
2.3.3
Top Cover Unit
(1) Remove the top cover (see section 2.3.1).
(2) Remove the rear cover (see section 2.3.10).
(3) Remove the left side cover (see section 2.3.12).
(4) Remove the right side cover (see section 2.3.13).
(5) Remove the shield plates A and B (see section 2.3.23), and unplug the connector to separate
the top cover.
(6) Disengage the top cover unit
1
at two places to detach it.
Figure 2-3-3 Top Cover Unit
1
AR-C200P Rev.5
30 /
9
B
3
3
7
6
A
5
1
0
0
4
2
8
2.3.4
Control Panel Assy/ Control Panel Bezel/ LED Control PWB/ Toner Sensors/ Stacker Full Sensor/
Control Panel/ Control Panel Tape Harness/ Eject Rollers
Control Panel/ Control Panel Tape Harness/ Eject Rollers
(1) Remove the control panel Assy
1
.
(2) Detach the control panel tape harness
2
.
(3) Remove the top cover unit (see section 2.3.3).
(4) Unscrew the six screws
3
to remove the earth plate
4
.
(5) Remove the two screws
5
, unhook all the connectors
6
and demount the LED control PWB
7
.
(6) Disengage the four claws to demount the toner sensor
8
.
(7) Demount the stacker full sensor
9
.
(8) Demount the exit rollers
A
.
(9) Detach the LED harnesses, K, Y, M and C
B
.
(10) Detach the top cover inner frame Assy
C
.
Figure 2-3-4 Control Panel Assy/ Control Panel Bezel/ LED Control PWB/ Toner Sensors/ Stacker
Full Sensor/ Control Panel/ Control Panel Tape Harness/ Eject Rollers
AR-C200P Rev.5
31 /
3
1
1
2
4
4
2.3.5
Top Cover Handle/ Top Cover Latch/ Top Cover Latch Spring
(1) Remove the two screws
1
to detach the top cover handle
2
and disengage the top cover latch
3
(at the same time, the two top cover latch springs
4
become detached).
Figure 2-3-5 Top Cover Handle/ Tope Cover Latch/ Top Cover Latch Spring
AR-C200P Rev.5
32 /
1
1
1
2
2.3.6
Eject Guide Assy
(1) Remove the five screws
1
to detach the eject guide Assy
2
.
Figure 2-3-6 Eject Guide Assy
Click on the first or last page to see other AR-C200P (serv.man4) service manuals if exist.