Sharp AR-C170 (serv.man26) Service Manual ▷ View online
AR-C170M SIMULATION 9 - 65
3. Press the [OK] key.
4. Select mode C with the scroll key.
5. Enter the paper kind with the 10-key.
6. Press the [OK] key.
7. Select mode B with the scroll key.
8. Enter (select) the print pattern with the 10-key.
9. Press the [OK] key.
10. Press the [EXECUTE] key. The color patch image (adjustment
4. Select mode C with the scroll key.
5. Enter the paper kind with the 10-key.
6. Press the [OK] key.
7. Select mode B with the scroll key.
8. Enter (select) the print pattern with the 10-key.
9. Press the [OK] key.
10. Press the [EXECUTE] key. The color patch image (adjustment
pattern) is outputted.
Set Item B to "2". Print out is made under half tone correction.
3. Press the [EXECUTE] key. The self-print pattern is printed.
(Items to be set)
• Details of each print pattern in item A
64
-02
Purpose
Adjustment/Setting/Operation data output, check
(display, print)
(display, print)
Function
(Purpose)
(Purpose)
Used to print the color patch image (adjustment
pattern). The above color patch image (adjustment
pattern) is outputted according to the currently
adjusted color balance (gamma). Use SIM 63-7 to
read the color patch image (adjustment pattern),
which can be used as the service target of the
automatic color balance (gamma) adjustment.
pattern). The above color patch image (adjustment
pattern) is outputted according to the currently
adjusted color balance (gamma). Use SIM 63-7 to
read the color patch image (adjustment pattern),
which can be used as the service target of the
automatic color balance (gamma) adjustment.
Section
Printer
Item
Operation
Operation/
Procedure
Procedure
1. Select mode A with the scroll key.
2. Enter the print quantity with the 10-key.
2. Enter the print quantity with the 10-key.
Display
Content
Min.
Value
Max.
Value
Default
A COPIES
Print quantity
1
999
1
B PROC ADJ
Reflection of half tone
correction
correction
1
2
1
Set value (B: PROC ADJ)
Reflection of half tone correction
1
NO
2
YES
64
-03
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operations of the printer section
(self-print operation/BW). (The print pattern, the
paper feed mode, the print mode, the print quantity,
and the density can be set optionally.)
(self-print operation/BW). (The print pattern, the
paper feed mode, the print mode, the print quantity,
and the density can be set optionally.)
Section
Printer
Item
Operation
Operation/
Procedure
Procedure
1. Select the set item with the scroll key.
2. Enter the print conditions with the 10-key and
2. Enter the print conditions with the 10-key and
press the [OK] key to set the entered value.
Display
Content
Set
range
Default
A PRINT
PATTERN
Print pattern specification
(* For details, refer to the
following.)
(* For details, refer to the
following.)
1 – 23
1
B DENSITY
Print gradation specification
1 – 255
5
C MULTI
COUNT
Print quantity
1 – 999
1
D EXPOSURE Exposure mode specification
1: THROUGH ---
No process (Through)
2: CHAR/RIC ---
Text/Printed photo
3: CHAR/PRPIC ---
Text/Photograph
4: CHAR --- Text
5: PRITN PIC --- Printed
5: PRITN PIC --- Printed
photo
6: PRINT PAPER ---
Photograph
7: MAP --- Map
8: STANDARD DITCH ---
8: STANDARD DITCH ---
No correction, dither
1 – 8
1
E PAPER
Paper feed tray selection
(MFT, CS1, CS2. CS3, CS4,
LCC)
(MFT, CS1, CS2. CS3, CS4,
LCC)
1 – 6
2
(CS1)
F EXIT TRAY
Paper exit tray selection (R,
S)
S)
1 or 2
1 (R)
G DUPLEX
Duplex print selection (NO,
YES)
YES)
1 or 2
1 (NO)
H PAPER
TYPE
Paper kind selection
1: PLAIN
2: HEAVY 1
3: HEAVY 2
4: OHP 1
5: OHP 2
6: ENVELOPE
1: PLAIN
2: HEAVY 1
3: HEAVY 2
4: OHP 1
5: OHP 2
6: ENVELOPE
1 – 6
1
No.
Content
Pattern
generating
device
Gradation
selection
Density
selection
1
Grid pattern
LED
Line width
✕
2
Dot pattern
LED
❍
✕
3
16-grdation: sub scan
LED
✕
✕
4
16-gradation: main scan
LED
✕
✕
5
Even pitch pattern (1 by
4): sub scan
4): sub scan
LED
❍
✕
6
Even pitch pattern (1 by
4): sub scan
4): sub scan
LED
❍
✕
7
Even pitch pattern (2 by
6): sub scan
6): sub scan
LED
❍
✕
8
Even pitch pattern (2 by
6): sub scan
6): sub scan
LED
❍
✕
9
Each color 10% (A4/A4R)
density print
density print
LED
Pattern
width
✕
10 8-color band print
LED
❍
✕
11 Even pitch pattern (1 by
N-1) sub scan direction
gradation
gradation
LED
Interval
width
(N-1)
(N-1)
✕
12 Grid pattern
Input
process
Line width
❍
13 Dot pattern
Input
process
❍
❍
14 256 gradations: sub scan
Input
process
None
❍
15 256-gradation pattern
(Fixed gradation)
Input
process
None
❍
AR-C170M SIMULATION 9 - 66
When the coordinates are properly set, the mark "+" on the display
turns to gray. When all the four points are pressed, the display
returns to the normal display.
turns to gray. When all the four points are pressed, the display
returns to the normal display.
The FAX-related soft SW setting is displayed on the LCD for
checking and changing.
checking and changing.
Read/write checks of the EEPROM, the SRAM (G/A), and the
SDRAM on the modem controller and the SRAM and the Flash
ROM on the MFP controller are executed and the results are
displayed.
SDRAM on the modem controller and the SRAM and the Flash
ROM on the MFP controller are executed and the results are
displayed.
16 256-gradation pattern
(Certain gradation)
(Gradation specified from
external)
(Gradation specified from
external)
Input
process
None
❍
17 Whole background (half
tone)
Half tone
❍
❍
18 256-gradation pattern
(Other dither)
Half tone
None
❍
19 256-gradation pattern
(Text dither)
Half tone
None
❍
20 Half background print
LED
❍
✕
21 Half background dot print
LED
❍
✕
22 1/4 background print
LED
❍
✕
23 1/4 background dot print
LED
❍
✕
65
65
-01
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the touch panel (LCD display section)
detection position.
detection position.
Section
Operation (Display, procedure)
Operation/
Procedure
Procedure
1. Touch the four cross marks. The coordinates at
the pressed point are set.
65
-02
Purpose
Adjustment/Setting/Operation data output, check
(display, print)
(display, print)
Function
(Purpose)
(Purpose)
Used to check the result of the touch panel (LCD
display) detection position adjustment. (The
coordinates are displayed.)
display) detection position adjustment. (The
coordinates are displayed.)
Section
Operation (Display, procedure)
Operation/
Procedure
Procedure
When the touch panel is pressed, the AD value in
each of X and Y directions at that point and the
coordinate values are displayed in ( ) as well as the
coordinate values of each point. It is based on the
coordinates set with SIM 65-1.
each of X and Y directions at that point and the
coordinate values are displayed in ( ) as well as the
coordinate values of each point. It is based on the
coordinates set with SIM 65-1.
No.
Content
Pattern
generating
device
Gradation
selection
Density
selection
66
66
-01
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to change/set the soft SW setting (FAX-related
items). (When the FAX is installed.)
items). (When the FAX is installed.)
Section
FAX
Operation/
Procedure
Procedure
1. Enter the soft SW number to be selected with the
10-key.
2. Change or set the selected soft SW setting.
3. Enter [EXECUTE] key to save the setting.
3. Enter [EXECUTE] key to save the setting.
66
-02
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to initialize the soft SW setting (FAX-related
items) according to the destination.
(When the FAX is installed.)
items) according to the destination.
(When the FAX is installed.)
Section
FAX
Item
Data
Initializing
Operation/
Procedure
Procedure
1. Enter the destination code with the 10-key, and
press [SET] key.
2. Press the [EXECUTE] key. (YES/NO key
display)
3. When [Yes] key is pressed, the soft SW is
initialized according to the destination code.
(When [No] key is pressed, the operation is
canceled. )
(When [No] key is pressed, the operation is
canceled. )
66
-03
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the memory on the Modem controller.
(When the FAX is installed.)
(When the FAX is installed.)
Section
FAX
Item
Operation
Operation/
Procedure
Procedure
1. Press the [EXECUTE] key.
AR-C170M SIMULATION 9 - 67
(Sendable signals)
∗
The unit of setting is kbps. Setting is made by the key display
name. The item in ( ) is, however, excluded.
name. The item in ( ) is, however, excluded.
(Sendable signals)
∗
The unit of setting is kbps. Setting is made by the key display
name. The item in ( ) is, however, excluded.
name. The item in ( ) is, however, excluded.
66
-04
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to select a signal and send it to the line and
speaker (at the max. level).
(When the FAX is installed.)
speaker (at the max. level).
(When the FAX is installed.)
Section
FAX
Item
Operation
Operation/
Procedure
Procedure
The page can be selected with the scroll keys.
1. Select the send mode.
2. Press the [EXECUTE] key.
1. Select the send mode.
2. Press the [EXECUTE] key.
Page.1:
NO SIGNAL (No signal is sent.)
Page.2:
12.0 V33
33.6 V34 (3429)
14.4 V17
31.2 V34 (3429)
12.0 V17
28.8 V34 (3429)
9.6 V17
26.4 V34 (3200Low)
7.2 V17
24.0 V34 (3200Hi)
9.6 V29
21.6 V34 (3200Low)
7.2 V29
19.2 V34 (3000Hi)
4.8 V27t
16.8 V34 (3000Low)
2.4 V27t
14.4 V34 (3000Hi)
0.3 FLG
12.0 V34 (2800)
CED 2100
9.6 V34 (2800)
CNG 1100
7.2 V34 (2800)
0.3 V21
4.8 V34 (2400)
ANSam
2.4 V34 (2400)
RINGER
14.4 V33
No RBT
66
-05
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to select a signal and send it to the line and
the speaker. (Level: Soft SW setting)
(When the FAX is installed.)
the speaker. (Level: Soft SW setting)
(When the FAX is installed.)
Section
FAX
Item
Operation
Operation/
Procedure
Procedure
The page can be selected with the scroll keys.
1. Select the send mode.
2. Press the [EXECUTE] key.
1. Select the send mode.
2. Press the [EXECUTE] key.
Page.1:
NO SIGNAL (No signal is sent.)
Page.2:
12.0 V33
33.6 V34 (3429)
14.4 V17
31.2 V34 (3429)
12.0 V17
28.8 V34 (3429)
9.6 V17
26.4 V34 (3200Low)
7.2 V17
24.0 V34 (3200Hi)
9.6 V29
21.6 V34 (3200Low)
7.2 V29
19.2 V34 (3000Hi)
4.8 V27t
16.8 V34 (3000Low)
2.4 V27t
14.4 V34 (3000Hi)
0.3 FLG
12.0 V34 (2800)
CED 2100
9.6 V34 (2800)
CNG 1100
7.2 V34 (2800)
0.3 V21
4.8 V34 (2400)
ANSam
2.4 V34 (2400)
RINGER
14.4 V33
No RBT
66
-06
Purpose
Data output/check
Function
(Purpose)
(Purpose)
Used to print the check list of the contents when
confidential registration is made.
(When the FAX is installed.)
confidential registration is made.
(When the FAX is installed.)
Section
FAX
Item
Data
Confidential pass code
Operation/
Procedure
Procedure
1. Press the [EXECUTE] key.
The confidential registration check list (Box No.,
BOX name, and print pass code) is printed. (If there
is no registration, print is not made.)
The confidential registration check list (Box No.,
BOX name, and print pass code) is printed. (If there
is no registration, print is not made.)
66
-07
Purpose
Data output/check
Function
(Purpose)
(Purpose)
Used to print all the images in the memory.
(When the FAX is installed.)
(When the FAX is installed.)
Section
FAX
Item
Data
Image data
Operation/
Procedure
Procedure
1. Press the [EXECUTE] key.
All the image data saved in the image memory are
outputted.
All the image data saved in the image memory are
outputted.
∗
The confidential receive data are also outputted.
66
-08
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to select a voice message and send it to the
line and the speaker (at the max. level).
(When the FAX is installed.)
line and the speaker (at the max. level).
(When the FAX is installed.)
Section
FAX
Item
Operation
Operation/
Procedure
Procedure
1. Select the voice message to be sent.
2. Press the [EXECUTE] key.
2. Press the [EXECUTE] key.
AR-C170M SIMULATION 9 - 68
(Sendable message)
(Sendable message)
(Sendable voice message)
(Sendable voice message)
NONE
Mute
PAUSE
Hold-on melody
MESSAGE1
Message 1
MESSAGE2
Message 2
MESSAGE3
Message 3
MESSAGE4
Message 4
MESSAGE5
Message 5
MESSAGE6
Message 6
ALARM
Alarm
RINGER
Calling melody (speaker)
EXT.TEL.RINGER
External telephone call
66
-09
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to select a signal and send it to the line and
the speaker. (Level: soft SW setting).
(When the FAX is installed.)
the speaker. (Level: soft SW setting).
(When the FAX is installed.)
Section
FAX
Item
Operation
Operation/
Procedure
Procedure
1. Select the voice message to be sent.
2. Press the [EXECUTE] key.
2. Press the [EXECUTE] key.
NONE
Mute
PAUSE
Hold-on melody
MESSAGE1
Message 1
MESSAGE2
Message 2
MESSAGE3
Message 3
MESSAGE4
Message 4
MESSAGE5
Message 5
MESSAGE6
Message 6
ALARM
Alarm
RINGER
Calling melody (speaker)
EXT.TEL.RINGER
External telephone call
66
-10
Purpose
Data clear
Function
(Purpose)
(Purpose)
All the images in the memory can be deleted.
(When the FAX is installed.)
(When the FAX is installed.)
Section
FAX
Item
Data
Image data
Operation/
Procedure
Procedure
1. Press the [EXECUTE] key.
All the image data saved in the image memory are
deleted.
All the image data saved in the image memory are
deleted.
∗
Confidentially received data are also deleted.
66
-11
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to select a pattern and send it to the line and
the speaker at 300bps (at the max. level). (When the
FAX is installed.)
the speaker at 300bps (at the max. level). (When the
FAX is installed.)
Section
FAX
Item
Operation
Operation/
Procedure
Procedure
1. Select the pattern to be sent.
2. Press the [EXECUTE] key.
2. Press the [EXECUTE] key.
NO SIGNAL
No signal (CML ON)
00000
Repetition of "00000"
11111
Repetition of "11111"
10101
Repetition of "10101"
11110
Repetition of "11110"
00001
Repetition of "00001"
66
-12
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to select a pattern and send it to the line and
the speaker at 300bps. (Level: soft SW setting)
(When the FAX is installed.)
the speaker at 300bps. (Level: soft SW setting)
(When the FAX is installed.)
Section
FAX
Item
Operation
Operation/
Procedure
Procedure
1. Select the pattern to be sent.
2. Press the [EXECUTE] key.
2. Press the [EXECUTE] key.
NO SIGNAL
No signal (CML ON)
00000
Repetition of "00000"
11111
Repetition of "11111"
10101
Repetition of "10101"
11110
Repetition of "11110"
00001
Repetition of "00001"
Click on the first or last page to see other AR-C170 (serv.man26) service manuals if exist.