Sharp AR-651 (serv.man25) User Manual / Operation Manual ▷ View online
1
2
3
4
5
6
7
8
9
10
11
12
4-17
Select other copy modes as required.
6
Press the START key.
- When placing an original on the glass, perform steps 5 and 6
on page 2-3 as needed.
5
Adjust the binding margin and press the SET key.
- The default width of the margin is 2 mm.
- To adjust the width, press the 2mm or 30mm key to
select the desired number, then press the SET key.
- If the optional saddle stitch finisher (AR-F12) is installed,
copies can be automatically stapled along their centre line.
To have copies stapled, press the STAPLE ON key.
To have copies stapled, press the STAPLE ON key.
- Maximum number of sheets that can be stapled
Page 6-7
1
2
3
4
5
6
7
8
9
10
11
12
4-18
USING THE EDITING FUNCTIONS
3
Place the original(s).
Page 2-9
- When placing an original on the glass, place the first page of
your originals first.
A top cover and/or back cover (special sheets, e.g. coloured paper) can be added to each set of copies.
- Adding a blank cover
- Adding a copied cover
- Adding a blank cover and a blank back cover
- Adding a copied cover and blank back cover
- Adding a blank cover
- Adding a copied cover
- Adding a blank cover and a blank back cover
- Adding a copied cover and blank back cover
10. COVER COPYING
1
Place the cover sheet in the drawer for cover sheet
or on the bypass guide.
- When placing it in the drawer for the cover sheet, it is necessary to
set the paper type (cover sheet), size and weight. Setting the
drawer for special uses.
drawer for special uses.
Page 2-7
- When placing it on the bypass guide, it is necessary to set
the paper size and weight.
Page 5-10
2
Place, or confirm that if there is, paper (other than
cover paper) in the drawer(s).
Page 2-4
- Place the paper of the same size and the same direction as
that of cover.
Example of adding a blank cover
Example of adding a copied cover
Example of adding a blank cover and a blank
back cover
back cover
When using the cover feature, make certain all paper sources are of the same orientation and the size.
This includes specified drawer, bypass and inserter (opitonal).
This includes specified drawer, bypass and inserter (opitonal).
Example of adding a copied top and a blank
back cover
back cover
1
2
3
4
5
6
7
8
9
10
11
12
4-19
When TOP COPIED key or TOP COPIED BACK BLANK
key is selected, the cover sheet can be copied only on the top
key is selected, the cover sheet can be copied only on the top
face (single-side) though 1-Sided Original to 2-Sided Copy is
used.
used.
5
Select the desired cover sheet key:
To add a blank top cover: TOP BLANK
To add a copied top cover: TOP COPIED
To add blank top and back covers: BOTH BLANK
To add copied top and blank back covers:
TOP COPIED BACK BLANK
6
Press the BASIC key to enter the basic menu, and
select the paper source of the same size and direction
as the cover sheet paper.
- Setting the drawer for cover sheet
Page 2-6
Select other copy modes as required.
7
Press the START key.
4
Press the EDIT key to enter the edit menu, and
press the COVER SHEET key.
- If the desired function keys are not displayed, press the Next
or Pre key to change the menu screen.
- Setting the bypass guide
Page 5-8
1
2
3
4
5
6
7
8
9
10
11
12
4-20
USING THE EDITING FUNCTIONS
3
Place the original(s).
Page 2-9
Special sheets of paper (such as coloured paper) are inserted into a set of copies at specified pages.
There are two sheet Insertion modes available:
- Inserting blank sheets before specified pages
- Inserting copied sheets at specified pages
There are two sheet Insertion modes available:
- Inserting blank sheets before specified pages
- Inserting copied sheets at specified pages
Example of inserting a blank before the
specified page
specified page
Example of inserting a copied sheet
before the specified page
before the specified page
You can have 2 Insertion Sheet paper Sources. To make Sheet Insertion copies, you have to set the
Insertion Sheet paper source(s) and the plain paper source to the same paper size and direction.
Insertion Sheet paper source(s) and the plain paper source to the same paper size and direction.
1
Place sheets of paper in the drawer for the sheet
insertion.
Page 2-6
4
Press the EDIT key to enter the edit menu, and
press the SHEET INSERTION key.
- If the desired function keys are not displayed, press the Next
or Pre key to change the menu screen.
11. SHEET INSERTION COPYING
2
Place plain paper in the drawer(s). ( The same size
and direction on Step 1)
Click on the first or last page to see other AR-651 (serv.man25) service manuals if exist.