Sharp AR-5316E (serv.man8) User Manual / Operation Manual ▷ View online
27
2
DUAL PAGE COPYING
A dual page original can be automatically separated into two pages during copying. This feature is convenient for
making copies of books and other dual page originals on individual sheets of paper.
making copies of books and other dual page originals on individual sheets of paper.
1
Place the original on the document
glass, aligning the division between
the pages with the size marker (
glass, aligning the division between
the pages with the size marker (
A4
(
8
1
/
2
)). Close the document cover
SPF.
Copying will begin from
the page to the right of
the size marker.
the page to the right of
the size marker.
2
Set the original size to A3 (11" x 17").
3
Press the [DUAL PAGE COPY] key
(
) and make sure that the DUAL
PAGE COPY indicator (
) is lit.
4
Make sure that a paper tray with A4
(8-1/2" x 11") size paper is selected.
(8-1/2" x 11") size paper is selected.
5
Set the number of copies and other
copy settings, and press the [START]
key (
copy settings, and press the [START]
key (
).
The copy will be delivered to the paper output
tray.
tray.
Original
Copy
• A4 (8-1/2" x 11") paper is used for dual page copying.
• When used in combination with XY ZOOM copying, enlargement is not possible.
• Dual page copying cannot be used in combination with the enlargement copying.
• Automatic ratio selection cannot be used when dual page copying is used.
• Dual page copying cannot be selected when an original is placed in the SPF.
• When used in combination with XY ZOOM copying, enlargement is not possible.
• Dual page copying cannot be used in combination with the enlargement copying.
• Automatic ratio selection cannot be used when dual page copying is used.
• Dual page copying cannot be selected when an original is placed in the SPF.
Note
To keep the copies in the correct page order
when performing dual page copying over
multiple pages, make sure that the original is
always placed on the document glass with the
lower page number to the right.
when performing dual page copying over
multiple pages, make sure that the original is
always placed on the document glass with the
lower page number to the right.
A4
8
1
/
2
Note
To cancel dual page copying, press the
[DUAL PAGE COPY] key (
[DUAL PAGE COPY] key (
). The
DUAL PAGE COPY indicator (
) will go
off, indicating that the function is cancelled.
Note
AR-5316-5320-EX.book 27 ページ ２００３年１１月２６日 水曜日 午後５時３分
28
INTERRUPTING A COPY RUN
(Interrupt copying)
A copy run can be temporarily interrupted to allow another copy job to be performed. When the other job is finished,
the copy run will resume using the original copy settings.
the copy run will resume using the original copy settings.
1
Press the [INTERRUPT] key (
) to
interrupt the copy run.
The INTERRUPT
indicator will light up and
the machine will revert to
the initial settings. (p.12)
The INTERRUPT
indicator will blink until
the current copy run
stops.
indicator will light up and
the machine will revert to
the initial settings. (p.12)
The INTERRUPT
indicator will blink until
the current copy run
stops.
2
Remove the previous original(s) and
place the original(s) of the interrupt
copy job.
place the original(s) of the interrupt
copy job.
3
Set the number of copies and other
copy settings and then press the
[START] key (
copy settings and then press the
[START] key (
).
4
When the copy job is finished, press
the [INTERRUPT] key (
the [INTERRUPT] key (
) and remove
the original(s).
The INTERRUPT indicator will go off, indicating
that the interrupt function is no longer operating.
The copy settings will automatically revert to the
settings selected for the copy run before the run
was interrupted.
that the interrupt function is no longer operating.
The copy settings will automatically revert to the
settings selected for the copy run before the run
was interrupted.
5
Replace the previous original(s) and
press the [START] key (
press the [START] key (
).
The interrupted copy run will resume.
Interrupt copying is not possible when the user programs are being configured.
Note
• If the SPF is being used, the copy run will
not stop until the set number of copies is
completed.
completed.
• If "Auditing mode" is enabled:
"- - -" will appear in the number of copies
display. Enter your 3-digit account number.
Copying will not be possible unless a
correct account number is entered. (p.39)
display. Enter your 3-digit account number.
Copying will not be possible unless a
correct account number is entered. (p.39)
INTERRUPT
Note
AR-5316-5320-EX.book 28 ページ ２００３年１１月２６日 水曜日 午後５時３分
29
3
Chapter 3
PRINTER FUNCTIONS
The machine includes a USB 1.1 connector and a parallel connector as standard equipment.
A computer can be connected to these connectors to use the machine as a printer.
To use the machine as a printer, the printer driver must first be installed as explained in the "Software Setup Guide".
A computer can be connected to these connectors to use the machine as a printer.
To use the machine as a printer, the printer driver must first be installed as explained in the "Software Setup Guide".
USING THE PRINTER MODE
The procedure for loading paper is the same as for loading copy paper. See "LOADING PAPER". (p.13)
BASIC PROCEDURE FOR PRINTING
The basic procedure for printing is explained below. To use convenient printer functions, see the "Online Manual" or
the printer driver help file.
the printer driver help file.
1
Make sure that paper is loaded in the
tray.
tray.
The procedure for loading paper is the same as for
copying. See "LOADING PAPER" (p.13) and make
sure the paper that you wish to use is loaded.
copying. See "LOADING PAPER" (p.13) and make
sure the paper that you wish to use is loaded.
2
Make sure that the ON LINE indicator
( ) on the operation panel is lit.
If the ON LINE indicator
(
(
) is not lit, press the [ON
LINE] key (
). When the
indicator is not lit, the
machine is off-line and
cannot print. When the
indicator is blinking, a print
job is transferred to the
machine.
machine is off-line and
cannot print. When the
indicator is blinking, a print
job is transferred to the
machine.
3
Open the file that you wish to print
and select "Print" from the File menu.
and select "Print" from the File menu.
4
Make sure that the printer driver for
the machine is selected, and select
print settings in the printer driver.
the machine is selected, and select
print settings in the printer driver.
For information on the settings in the printer
driver, see the "Online Manual", the "Software
Setup Guide", or the printer driver help file.
driver, see the "Online Manual", the "Software
Setup Guide", or the printer driver help file.
5
Click the "Print" button or the "OK"
button to begin printing.
button to begin printing.
The print job will be delivered to the paper output
tray.
tray.
Important points when setting the paper size
• Make sure that the tray's paper size setting is the
same as the tray's paper size setting in the printer
driver. For example, if the tray's paper size setting is
A4R, set "Setting Paper Size" to "A4-R". For more
information, see "CONFIGURING THE PRINTER
DRIVER" in the "Software Setup Guide".
driver. For example, if the tray's paper size setting is
A4R, set "Setting Paper Size" to "A4-R". For more
information, see "CONFIGURING THE PRINTER
DRIVER" in the "Software Setup Guide".
• If a problem occurs in printer mode, see "TROUBLESHOOTING" (p.40).
• When interrupt copying is being performed, printing is not possible.
• When interrupt copying is being performed, printing is not possible.
Note
• Print jobs received while the machine is copying will be stored in memory. When the copy job is finished, the
print jobs will begin printing.
• Printing is not possible when the front or side cover is opened for machine maintenance, or when a misfeed
occurs or the machine runs out of paper or toner, or when the drum cartridge reaches its replacement time.
• If an original misfeed occurs in the SPF, printing will not be possible until the misfed original is removed and the
SPF is restored to a usable state.
Note
Make sure that the paper size setting on the
machine is the same as the paper size set in
the printer driver.
machine is the same as the paper size set in
the printer driver.
Note
AR-5316-5320-EX.book 29 ページ ２００３年１１月２６日 水曜日 午後５時３分
30
PRINTER FUNCTIONS
Pausing a print job
To pause a print job during printing, press the [ON LINE] key (
) on the operation panel to switch the machine
off-line. Printing will be paused and the ON LINE indicator (
) will blink.
To cancel a print job, press the [CLEAR] key (
) or the [CLEAR ALL] key (
).
To resume printing, press the [ON LINE] key (
) to switch the machine online.
When "Use close paper size" is disabled
The PAPER SIZE indicator on the operation panel will blink. You can press the [TRAY SELECT] key (
) to select a
tray manually, or load paper in the bypass tray and press the [ON LINE] key (
) to begin printing.
When "Use close paper size" is enabled
Printing will take place using a size of paper that is close to the size of the print image.
OPERATION IN COPY AND PRINTER MODES
Some operations cannot be performed simultaneously when the machine is being used in printer mode or copy
mode.
mode.
*
1
Can be used after pressing the [INTERRUPT] key (
).
*
2
Printing will begin when the [CLEAR ALL] key (
) is pressed after the copy job is finished, or when the [ON LINE] key (
) is
pressed to switch the machine online. Printing will also begin after the set auto clear time elapses, or after 60 seconds if "Auto
clear time" is disabled.
clear time" is disabled.
*
3
The print job is paused and copying begins.
Modes
Copying
Printing
Copy
Copy key input
Yes
Yes
During copying
Yes*
1
No*
2
Printer
During printing
Yes*
3
No
AR-5316-5320-EX.book 30 ページ ２００３年１１月２６日 水曜日 午後５時３分
Click on the first or last page to see other AR-5316E (serv.man8) service manuals if exist.