Sharp AR-5316E (serv.man8) User Manual / Operation Manual ▷ View online
19
COPY FUNCTIONS
2
Copying from the SPF
1
Make sure that an original has not
been left on the document glass.
Close the SPF.
been left on the document glass.
Close the SPF.
2
Adjust the original guides to the size
of the original(s).
of the original(s).
3
Set the original(s) face up in the
document feeder tray.
document feeder tray.
● Insert the original into the document feeder tray as
far as it will go. When the original is set, the SPF
indicator will light up.
indicator will light up.
● The ORIGINAL SIZE indicator corresponding to the
size of the original lights up.
● If the ORIGINAL SIZE indicator is blinking, rorate
the original so that it is in the same orientation as the
blinking ORIGINAL SIZE indicator.
blinking ORIGINAL SIZE indicator.
● Make sure that the PAPER SIZE indicator is lit.
If the indicator is not lit, no tray has the same size of
paper as the original. Load paper of the required
size in a tray, or select the bypass tray with the
[TRAY SELECT] key (
paper as the original. Load paper of the required
size in a tray, or select the bypass tray with the
[TRAY SELECT] key (
) and copy from the
bypass tray.
● The bypass tray must be manually selected.
● To copy on paper of a different size than the
original, select the paper with the [TRAY SELECT]
key (
key (
).
4
Set the number of copies.
5
Press the [START] key (
) to begin
copying.
The copy is delivered to
the paper output tray.
the paper output tray.
Do not place originals of different sizes
together in the document feeder tray. This
may cause misfeeds.
together in the document feeder tray. This
may cause misfeeds.
Note
• The paper output tray can hold up to 250
sheets of paper.
• About one minute after copying ends, "Auto
clear" activates and restores the copy
settings to the initial settings. (p.12) The
setting for "Auto clear" time can be changed
in the user programs. (p.33)
settings to the initial settings. (p.12) The
setting for "Auto clear" time can be changed
in the user programs. (p.33)
• Press the [CLEAR] key (
) to stop
copying in the middle of a run.
• If you find it difficult to remove the original
from the document feeder tray, open the
feeding roller cover first and then remove
the original. If you remove the original
without opening the feeding roller cover, the
original may become dirty.
feeding roller cover first and then remove
the original. If you remove the original
without opening the feeding roller cover, the
original may become dirty.
Note
AR-5316-5320-EX.book 19 ページ ２００３年１１月２６日 水曜日 午後５時３分
20
COPY FUNCTIONS
Auto paper select mode (Two-tray model only)
When the AUTO PAPER SELECT indicator (
) lights up, "Auto paper select mode" is enabled. This function
automatically selects the paper that is the same size as the original A5, A4, A4R, B4, A3 (5-1/2" x 8-1/2", 8-1/2" x
11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14" and 11" x 17") paper. "Auto paper select mode" can be disabled in the
user programs. (p.33)
• The sizes of paper that can be loaded vary by country and region.
• If a zoom setting is selected after placing the original, the paper size that is appropriate for the zoom setting will
11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14" and 11" x 17") paper. "Auto paper select mode" can be disabled in the
user programs. (p.33)
• The sizes of paper that can be loaded vary by country and region.
• If a zoom setting is selected after placing the original, the paper size that is appropriate for the zoom setting will
be automatically selected.
• "Auto paper select mode" is cancelled if the automatic ratio selection is enabled (p.22) or if a tray is selected
with the [TRAY SELECT] key (
). Auto paper select resumes operation when the [CLEAR ALL] key (
) is
pressed or when "Auto clear time" activates.
Removing the document cover
To copy large originals like newspapers, remove the
document cover. To remove the cover, lift straight
up as shown. To replace the cover, do the reverse.
The SPF cannot be removed.
document cover. To remove the cover, lift straight
up as shown. To replace the cover, do the reverse.
The SPF cannot be removed.
Copying books or originals with folds or
creases
creases
Press down on the document cover/SPF while
copying as shown. If the document cover/SPF is not
completely closed, shadows may appear on the
copy or it may be fuzzy. Straighten originals with
folds or creases well before placing.
copying as shown. If the document cover/SPF is not
completely closed, shadows may appear on the
copy or it may be fuzzy. Straighten originals with
folds or creases well before placing.
Originals that can be used in the SPF
Originals that are A5 to A3 (5-1/2" x 8-1/2" to 11" x
17") and 56 g/m
17") and 56 g/m
2
to 90 g/m
2
(15 lbs. to 24 lbs.) can
be used. A maximum of 40 pages can be placed at
once.
For originals that are B4 (8-1/2" x 14") or larger (B4,
A3 (8-1/2" x 14", 11" x 17")), a maximum of 30
pages can be placed at once.
once.
For originals that are B4 (8-1/2" x 14") or larger (B4,
A3 (8-1/2" x 14", 11" x 17")), a maximum of 30
pages can be placed at once.
Originals that cannot be used in the SPF
The following originals cannot be used. These may
cause misfeeds or smudging and unclear images.
• Transparencies, tracing paper, other transparent or
cause misfeeds or smudging and unclear images.
• Transparencies, tracing paper, other transparent or
translucent paper, and photographs.
• Carbon paper, thermal paper.
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Originals with binder holes.
• Originals printed using an ink ribbon (thermal
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Originals with binder holes.
• Originals printed using an ink ribbon (thermal
transfer printing), originals on thermal transfer
paper.
paper.
Stream feeding mode
If "Stream feeding mode" is enabled in the user
programs (p.33), the SPF indicator will blink for
about 5 seconds after all originals are fed. If a new
original is placed in the SPF during this time, the
original will be automatically fed in and copying will
begin.
programs (p.33), the SPF indicator will blink for
about 5 seconds after all originals are fed. If a new
original is placed in the SPF during this time, the
original will be automatically fed in and copying will
begin.
AUTO
• Make sure that there are no paper clips or
staples on the original.
• Straighten curled originals before placing
them in the document feeder tray. Curled
originals may cause misfeeds.
originals may cause misfeeds.
Note
AR-5316-5320-EX.book 20 ページ ２００３年１１月２６日 水曜日 午後５時３分
21
COPY FUNCTIONS
2
MAKING A COPY DARKER OR LIGHTER
Automatic exposure adjustment is initially enabled. This function automatically adjusts the copy image according to
the original being copied. If you wish to select the exposure level yourself, follow the steps below. (Select from two
original types and five exposure levels for each original type.) The exposure level used in automatic exposure
adjustment can also be changed. ("ADJUSTING THE AUTOMATIC EXPOSURE LEVEL" (p.31) )
the original being copied. If you wish to select the exposure level yourself, follow the steps below. (Select from two
original types and five exposure levels for each original type.) The exposure level used in automatic exposure
adjustment can also be changed. ("ADJUSTING THE AUTOMATIC EXPOSURE LEVEL" (p.31) )
Original types
● AUTO......Automatic exposure adjustment is enabled and the exposure is automatically adjusted according to the
original being copied. The exposure is lowered for coloured areas and background shadows.
● TEXT.......The exposure is raised for light areas and lowered for dark backgrounds to make text easier to read.
● PHOTO ...Halftones in the photo are reproduced with greater clarity.
1
Press the [AUTO/TEXT/PHOTO] key
(
(
/
/
) to select the original
type.
To adjust the exposure of
a text original manually,
press until the TEXT
indicator (
a text original manually,
press until the TEXT
indicator (
) lights.
To copy a photo, press
until the PHOTO
indicator (
until the PHOTO
indicator (
) lights.
2
Press the [Light] key (
) or [Dark]
key (
) to adjust the exposure.
For a darker image,
press the [Dark] key
(
press the [Dark] key
(
). For a lighter image,
press the [Light] key
(
(
).
If exposure level 2 or 4 is
selected, the two
indicators will light
simultaneously.
selected, the two
indicators will light
simultaneously.
SELECTING THE TRAY
If you wish to use a tray other than the automatically selected tray (for example you wish to enlarge or reduce the
copy or use the bypass tray), press the [TRAY SELECT] key (
copy or use the bypass tray), press the [TRAY SELECT] key (
) to select the desired tray.
Auto tray switching (Two-tray model only)
If the tray runs out of paper during copying and there is another tray with the same size of paper and the same
feeding orientation (horizontal or vertical), the other tray is automatically selected and copying continues. "Auto tray
switching" can be disabled in the user programs (p.33).
feeding orientation (horizontal or vertical), the other tray is automatically selected and copying continues. "Auto tray
switching" can be disabled in the user programs (p.33).
To return to automatic adjustment, press until
the AUTO indicator (
the AUTO indicator (
) lights.
AUTO
AUTO
Note
AUTO
Exposure value guidelines
1 – 2 Dark originals like newspapers
3
3
Normal originals
4 – 5 Coloured text or text written in pencil
AUTO
1 3 5
Note
• If the desired PAPER SIZE indicator does not light up, change the paper in the tray to the desired paper size.
(p.16)
• Automatic ratio selection (p.22) does not operate when the bypass tray or a tray set for a special paper size is
selected.
Note
AR-5316-5320-EX.book 21 ページ ２００３年１１月２６日 水曜日 午後５時３分
22
COPY FUNCTIONS
SETTING THE NUMBER OF COPIES
Press the numeric keys to set the number of copies.
● The set number of copies appears in the display. A
maximum of 999 copies (factory default setting)
can be set.
can be set.
● If you wish to make only a single copy, copying is
possible with the display showing "0".
Important note when making a large number
of copies
of copies
The maximum number of copies can be changed in
the user programs. (p.34)
When the maximum number of pages (about 250
pages) that can be held in the paper output tray are
output, copying will temporarily stop. When this
happens, promptly remove the copies and press the
[START] key (
the user programs. (p.34)
When the maximum number of pages (about 250
pages) that can be held in the paper output tray are
output, copying will temporarily stop. When this
happens, promptly remove the copies and press the
[START] key (
) to resume copying. Copying will
also stop after about 500 pages and 750 pages.
Remove the pages and resume copying in the same
way.
Remove the pages and resume copying in the same
way.
REDUCTION/ENLARGEMENT/ZOOM
The zoom function enables precise copy ratio selection from 25% to 400% in increments of 1%.
There are three ways to enlarge and reduce copies, as explained below.
There are three ways to enlarge and reduce copies, as explained below.
• Reduction and enlargement ratios can be selected automatically with the [AUTO IMAGE] key (
).
"AUTOMATIC RATIO SELECTION" (below)
• Reduction and enlargement ratios can be selected manually with the [PRESET RATIO] selector keys
(
,
) and/or the [ZOOM] keys (
,
).
"MANUAL RATIO SELECTION" (p.23)
• Separate settings can be selected for the vertical and horizontal ratios.
"SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEPARATELY" (p.24)
Ratios that can be selected will vary depending on whether the original is placed on the document glass or in the
SPF.
SPF.
AUTOMATIC RATIO SELECTION
1
Place the original(s) in the document
feeder tray or on the document glass.
feeder tray or on the document glass.
2
If the original is placed on the
document glass, select the original
size. (p.18)
document glass, select the original
size. (p.18)
3
Use the [TRAY SELECT] key (
) to
select the paper tray with the desired
paper size.
paper size.
This feature will not work
when using copy paper
of non-standard size or
when using the bypass
tray.
when using copy paper
of non-standard size or
when using the bypass
tray.
If you enter the wrong number, press the
[CLEAR] key (
[CLEAR] key (
) and enter the correct
number.
Note
AUTO
%
Original position
Selectable ratios
Document glass
25% – 400%
SPF
50% – 200%
Automatic ratio selection can be used when the
original size is A5, A4, A4R, B4, A3 (5-1/2" x
8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13",
8-1/2" x 14" or 11" x 17"). The sizes of paper
that can be loaded vary by country and region. It
cannot be used for other sizes.
original size is A5, A4, A4R, B4, A3 (5-1/2" x
8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13",
8-1/2" x 14" or 11" x 17"). The sizes of paper
that can be loaded vary by country and region. It
cannot be used for other sizes.
Note
AR-5316-5320-EX.book 22 ページ ２００３年１１月２６日 水曜日 午後５時３分
Click on the first or last page to see other AR-5316E (serv.man8) service manuals if exist.