DOWNLOAD Sharp AR-405 (serv.man32) Service Manual ↓ Size: 1.33 MB | Pages: 80 in PDF or view online for FREE

The copier has two different finisher modes: one sorts copies into sets
matching the sequence of the originals and the second groups copies by
original. When an optional finisher (AR-FN2) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or
group of copies can be stacked offset from the previous set.

Paper feed area cover

Top cover

Top tray

Offset tray

Stapler cover

Staple cartridge

Do not put pressure on the finisher or subject it to undue force.

Tray capacity

Top tray:

250 sheets

Offset tray: 750 sheets

Paper size

Top tray:

A3 to A6R (5-1/2" x 8-1/2" to 11" x 17", 12" x 18")

Offset tray: A4 (8-1/2" x 11")

Paper weight

Top tray:

52 to 128 

g

/m

2

 (14 lbs. to 34 lbs.)

Offset tray: 56 to 128 

g

/m

2

 (15 lbs. to 34 lbs.)

For paper weighing more than 105 

g

/m

2

 (28 lbs.),

A4 (8-1/2" x 11") is the maximum size.

Offset

Min. 15 mm for A4 (61/64 inch for 8-1/2" x 11")

Paper size

A4 (8-1/2" x 11")

for stapling

Stapling capacity

30 sheets (80 

g

/m

2

 (21 lbs.))

Power supply

Drawn from the copier

Weight

Approx. 22 k

g

 (49 lbs.)

Dimensions

457 mm (W) x 518 mm (D) x  820 mm (H)

(18"(W) x 20-13/32"(D) x  32-19/64"(H))

Specifications are subject to change for improvement without notice.

Finisher (AR-FN2)

In the initial setting, the top tray is selected.
To select the offset tray, press the OUTPUT key and then the
“OFFSET TRAY” key on the touch panel.
If the offset tray is selected, each copy set will be offset by a minimum
of 15 mm for A4 paper (61/64 inch for 8-1/2" x 11" paper).
When the offset stack function is disabled, copies will not be offset.
The offset stack function can be enabled or disabled by pressing  the
“OFFSET” check mark box on the touch panel.
When the STAPLE SORT mode is selected, the offset stack function
will be disabled.
If the offset tray is selected, only A4 (8-1/2" x 11") paper can be used.
The top tray cannot be used to offset copies.

OUTPUT

TOP TRAY

OFFSET

SO

OFFSET

TRAY

1

2

3

1 2

1

1 1

1

1

1

2

3

1

Finisher (AR-FN2)

●

See next page for details.

When SORT is selected, the SORT (

) icon will be indicated and

copies will be collated by sets.

When STAPLE SORT is selected, the STAPLE SORT (

) icon will

be indicated and collated copies will be stapled automatically.
When the SORT or STAPLE SORT icon is not indicated on the touch
panel, copies will be grouped by originals.
To change the finisher mode, press the OUTPUT key and then select
the desired mode on the touch panel.

●

When the RADF is used for copying, copies will be collated  at the
default setting.
When the document glass is used for copying, copies will be
grouped at the default setting.

●

In the STAPLE SORT mode, only A4 (8-1/2" x 11") paper can be
used.

1

2

3

3

2

1

3

2

1

3

2

1

1

2

3

3

3

2

3

2

1

1

1

2

1

2

3

2 3

2 3

2 3

1

1

1

Finisher (AR-FN2)

The STAPLE SORT mode staples A4 (8-1/2" x 11") size copies.
Stapled sets cannot be delivered to the top tray.

NOTE:
Different size originals cannot be copied onto copy paper of their
respective sizes in the STAPLE SORT mode. Only A4 (8-1/2" x 11")
size paper can be selected in the STAPLE SORT mode.

●

If the number of copies in one set is more than 30, the copies
will not be stapled.

●

If the orientation of the originals does not match that of the copy
paper, the images of the originals will be rotated. The stapling
position in this case is shown below.

 

●

If originals in the landscape orientation are copied, the copies
will be stapled at an improper position.

Stapling position

EXPOSURE

READY TO COPY.(DOCUMENT FEEDER MODE) 

OUTPUT

TOP TRAY

SORT

OFFSET

TRAY

STAPLE

SORT

GROUP

EXPOSURE

PAPER SELECT

COPY RATIO

Finisher (AR-FN2)