AR-405 (serv.man32). AR405 Operation Manual-Section 3 — Sharp Copying Equipment User Guide / Operation Manual

Model
AR-405 (serv.man32)
Pages
80
Size
1.33 MB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Copying Equipment / AR405 Operation Manual-Section 3
File
ar-405-sm32.pdf
Date

View Sharp AR-405 (serv.man32) User Guide / Operation Manual online

6-1
CHAPTER
6
CHAPTER 6
GENERAL INFORMATION
This chapter describes general information for using this copier.
                                      
Page
PART NAMES AND FUNCTIONS
......................
6-2
Exterior
.........................................
6-2
Interior
..........................................
6-3
Operation panel
...................................
6-4
Touch panel (Basic screen)
...........................
6-5
USER MAINTENANCE
..............................
6-6
TOUCH PANEL CONTRAST ADJUSTMENT
..............
6-7
SPECIFICATIONS
.................................
6-8
6-2
CHAPTER
6
PART NAMES AND FUNCTIONS
Exterior
Exit area cover
Open to remove misfed paper.
Power switch
Press to turn copier power on and off.
Exit tray (optional)
Finished copies are deposited in the exit tray.
Operation panel
All copier controls are located here for easy
operation.
Document feeder indicators
Original feed indicator
Indicates the originals in the tray will be fed.
Original reminder
Indicates an original is still on the document glass.
RADF feeding roller cover
Open to remove misfed originals.
Original guides
Adjust to the size of the originals.
Document feeder tray
Holds up to 50 originals.
RADF exit area
Finished originals are output here.
RADF exit roller cover
Open to remove misfed originals.
Paper trays
Each tray holds 500 sheets of paper.
Front cover
Open to remove misfeeds and to service the
copier.
Handles
Right side cover
Open to remove misfeeds in the paper feed area.
Toner collecting container cover
Open to replace the toner collecting container.
Document glass
All originals which cannot be copied from the
RADF must be copied here.
Paper clip tray
Keep paper clips here.
GENERAL INFORMATION
Part names and functions
6-3
CHAPTER
6
PART NAMES AND FUNCTIONS
Interior
GENERAL INFORMATION
Part names and functions
Bypass tray paper guides
Adjust to the width of the copy paper.
Bypass tray
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
Fusing unit
The fusing unit is hot. Exercise care in this area.
Transport lever
Turn to open the transport section.
Photoconductive drum
Copy images are formed on the photoconductive
drum.
Corona unit
The unit is used to charge the photoconductive
drum.
Toner hopper
Contains toner.
Roller rotating knobs
Turn to remove misfed paper.
Paper guide
Push down to remove misfed paper.
Accessories
Operation manual . . . . . . . . . . . . . . . . . . . . .  1
Toner collecting containers
(including 1 pre-installed at the factory) . . . . .  3
6-4
CHAPTER
6
PART NAMES AND FUNCTIONS
Operation Panel
LCD touch panel
Displays information to assist the operator.
Various operation keys are included in the touch
panel depending on the particular screen being
displayed.
10-key pad
Used to set the copy quantity.
INTERRUPT (
) key and indicator (p. 2-20)
Interrupts a copy run.
CLEAR ALL (
CA
) key
Clears all selected settings and returns the copier
to the initial settings.
COPY key
Press during standby to display the total output
count.
AUDIT CLEAR (
) key
Closes an open account.
PROGRAM (
P
) key (p. 2-18)
Press to select the job memory mode.
CLEAR (
C
) key
Press to clear the copy quantity display, or press
during a copy run to terminate copying. The
copier will stop after copies in progress are
finished.
START (
) key and indicator
Copying is possible when the indicator is on.
Press to start copying.
SPECIAL MODES key (p.3-1)
Press to select special functions.
Message display
Messages are displayed regarding copier status
and operation.
Paper size display
The sizes of loaded copy paper are displayed and
the selected paper feed location is highlighted.
 indicates the amount of copy paper.
Copy quantity display
Displays the specified number of copies.
Original size display
The original paper size is displayed.
INFORMATION (
) key (p. 1-7)
Press for operation guidance on use of various
features of this copier.
Press for guidance when a misfeed occurs, when
adding toner, or when used toner must be
disposed of.
GENERAL INFORMATION
Part names and functions
1
2
3
4
5
6
7
8
9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
CA
CLEAR ALL
START
PRINT
COPY
DATA
ON LINE
The key and indicators 
are not used for the 
copier features.
Page of 80
Display

Download Sharp AR-405 (serv.man32) User Guide / Operation Manual

Here you can view online or download Sharp AR-405 (serv.man32) User Guide / Operation Manual in pdf. This User Guide / Operation Manual can help you recover, restore, fix, disassemble and repair Sharp AR-405 (serv.man32) Copying Equipment. Information contained in Sharp AR-405 (serv.man32) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).