DOWNLOAD Sharp AR-405 (serv.man32) Service Manual ↓ Size: 1.33 MB | Pages: 80 in PDF or view online for FREE

Model
AR-405 (serv.man32)
Pages
80
Size
1.33 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / AR405 Operation Manual-Section 3
File
ar-405-sm32.pdf
Date
PREV: Sharp AR-405 (serv.man31) User Manual / Operation Manual

Sharp AR-405 (serv.man32) User Manual / Operation Manual ▷ View online

7-11
CHAPTER
7
6
Insert the new staple cartridge into the box until it clicks
in place.
●
Insert the new cartridge by aligning the arrows on the cartridge
with those on the box. Check that the cartridge locks in place by
pulling it slightly.
●
The cartridge holds 5,000 staples.
7
Remove the rear paper and tape from the cartridge.
●
Pull them straight. If they are pulled obliquely, the tape may be
torn.
8
Insert the staple box to the stapler unit until it clicks into
place.
9
Return the stapler unit to face down.
10
Push the finisher toward the copier and latch it in place.
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)
7-12
CHAPTER
7
Staple jam removal
If staples become jammed in the stapler, “
CHECK STAPLER POSITION
OR STAPLE JAM.
” will be displayed.  Remove the jammed staples in the
manner described below.
1
While holding the finisher release lever, slide the finisher
away from the copier.
2
Turn the stapler unit to face up.
3
Hold the staple box release lever to unlatch the staple
box.
4
Remove the staple box.
5
Lower the lever at the end of the staple box and remove
the jammed staples.
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)
7-13
CHAPTER
7
6
Return the lever to its original position.
7
Insert the staple box to the stapler unit until it clicks in
place.
8
Return the stapler unit to face down.
9
Push the finisher toward the copier and latch it in place.
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)
7-14
CHAPTER
7
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS   FOR RECOVERY INSTRUCTIONS.
Misfeed removal
The copier will stop when a misfeed occurs.
The message “
A MISFEED HAS OCCURRED. CLEAR INDICATED
AREA. PRESS 
 FOR RECOVERY INSTRUCTIONS.
” will appear
with a display of paper misfeed locations.  Press the INFORMATION
(
) key for more detailed information as necessary.
SF-S15  20-bin sorter
Misfeed in the upper transport area
1
While holding the finisher release lever, slide the finisher
away from the copier.
2
Remove the misfed paper.
Page of 80
Display

Click on the first or last page to see other AR-405 (serv.man32) service manuals if exist.

RANDOM: