Sharp AR-405 (serv.man10) Service Manual ▷ View online
27 - 4
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to enter the start time and the end time of servicing for management of service work. (The data can be
checked by the host computer.)
checked by the host computer.)
Section
Communication unit (TEL/LIU/MODEM etc.)
Item
Data
Operation/
Procedure
Procedure
1. Press the[SERVICE START]key when starting servicing.
The key is highlighted.
2. Press the [EXECUTE]key.
The key is highlighted and the data on service start time is sent.
3. Press the [SERVICE END]Key after completion of servicing.
The key is highlighted.
4. Press the [EXECUTE]key .
The key is highlighted and the data on service end time is sent.
When the host receives the data normally,"Complete"is highlighted.
In case of a trouble, "Failed"is highlighted.
When the host receives the data normally,"Complete"is highlighted.
In case of a trouble, "Failed"is highlighted.
Note
For this setting, the copier and the host computer must be connected with a communication line (MODEM).
27 - 5
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to enter the TAG No. of the copier. (This simulation allows to check the machine TAG No. with the host
computer.)
computer.)
Section
Communication unit (TEL/LIU/MODEM etc.)
Item
Data
Operation/
Procedure
Procedure
1. When entering the tag No. newly or changing the tag No. enter the value (max. 8 digits) with the 10-key.
The entered number is displayed in the column of "NEW"
2. Press the [OK] key.
The new tag No. entered in procedure 1 is set.
It is advisable to enter the machine’s SER No. for machine management and servicing.
It is advisable to enter the machine’s SER No. for machine management and servicing.
Note
For this setting, the copier and the host computer must be connected with a communication line (MODEM).
AR-405
1/21/1999
8 – 46
30
30 - 1
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operation of sensors and detectors in the paper feed section, the paper transport section, and
the paper exit section, and the related circuit.
the paper exit section, and the related circuit.
Section
Others
Item
Operation
Operation/
Procedure
Procedure
The operations of the sensors and detectors in the sections other than the paper feed section of the copier are
displayed.
The active sensors and detectors are highlighted.
displayed.
The active sensors and detectors are highlighted.
DSWF
Copier front door open/close
DSWL
Copier left door
DSWLL
Copier left lower door
DSWR
Copier right door
DVCH1
Developing unit installation detection
DVCH2
Developing unit installation detection
DVCH3
Developing unit installation detection
DVCH4
Developing unit installation detection
PFD
Paper vertical transport sensor
PPD1
Paper transport sensor 1
PPD2
Paper transport sensor 2
PSD
Paper transport sensor
POD1
Paper exit sensor 1
POD2
Paper exit sensor 2
POD3
Paper exit sensor 3
TFD
Waste toner bottle full detection
TMS
Toner motor missing detection
Note
30 - 2
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operation of sensors and detectors in the paper feed section and the related circuits.
(The operations of sensors and detectors in the paper feed section can be monitored with the LCD.)
(The operations of sensors and detectors in the paper feed section can be monitored with the LCD.)
Section
Paper transport
Item
Operation
Operation/
Procedure
Procedure
The operations of the sensors and detectors in the paper feed section of the copier are displayed.
The active sensors and detectors are highlighted.
The active sensors and detectors are highlighted.
AR-405
8 – 47
1/21/1999
UCSS1
Copier upper tray paper size detection 1
UCSS2
Copier upper tray paper size detection 2
UCSS3
Copier upper tray paper size detection 3
UCSS4
Copier upper tray paper size detection 4
LUD1
Copier upper tray upper limit detection
PED1
Copier upper tray paper detection
UCSPD1
Copier upper tray paper size detection 1
UCSPD2
Copier upper tray paper size detection 2
LCSS1
Copier lower tray paper size detection 1
LCSS2
Copier lower tray paper size detection 2
LCSS3
Copier lower tray paper size detection 3
LCSS4
Copier lower tray paper size detection 4
LUD2
Copier lower tray paper detection
PED2
Copier lower tray paper detection
LCSPD1
Copier lower tray paper size detection 1
LCSPD2
Copier lower tray paper size detection 2
MPLS1
Manual tray length detection 1
MPLS2
Manual tray length detection 2
MPLD1
Manual feed paper length detection 1
MPLD2
Manual feed paper length detection 2
MPED
Manual tray paper empty detection
One of these is
displayed
displayed
A4/A3
Manual tray (width only) detection size
11x
Manual tray (width only) detection size
B5/B4
Manual tray (width only) detection size
8.5x
Manual tray (width only) detection size
A5/A4R
Manual tray (width only) detection size
B5R
Manual tray (width only) detection size
POSTCARD
Manual tray (width only) detection size
EXTRA
Manual tray (width only) detection size
Note
40
40 - 1
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operation of the manual paper feed tray paper size detector and the related circuit. (The
operation of the manual paper feed tray paper size detector can be monitored with the LCD.)
operation of the manual paper feed tray paper size detector can be monitored with the LCD.)
Section
Paper transport
Item
Operation
AR-405
1/21/1999
8 – 48
Operation/
Procedure
Procedure
The operations of the sensors and detectors in the manual paper feed section are displayed.
The active sensors and detectors are highlighted.
The active sensors and detectors are highlighted.
MPLS1
Manual tray length detection 1
MPLS2
Manual tray length det3ction 2
MPLD1
Manual feed paper length detection 1
MPLD2
Manual feed paper length detection 2
One of these is
displayed.
displayed.
A4/A3
Manual tray (width only) detection size
11x
Manual tray (width only) detection size
B5/B4
Manual tray (width only) detection size
8.5x
Manual tray (width only) detection size
A5/A4R
Manual tray (width only) detection size
B5R
Manual tray (width only) detection size
POSTCARD
Manual tray (width only) detection size
EXTRA
Manual tray (width only) detection size
Note
40 - 2
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the manual paper feed tray paper width detector detection level.
Section
Paper transport
Item
Operation
Operation/
Procedure
Procedure
1. Open the manual paper feed guide at maximum.
2. Press the [MAX POSITION] key.
3. Press the [EXECUTE] key.
The[EXECUTE] key is highlighted then it returns to the normal display.
The manual paper feed guide max. width position detection level is recognized.
The manual paper feed guide max. width position detection level is recognized.
4. Open the manual paper feed guide at minimum.
5. Press the [MIN POSITION] key.
6. Press the [EXECUTE] key.
The key is highlighted then it returns to the normal display.
The manual paper feed guide min. position detection level is recognized.
The manual paper feed guide min. position detection level is recognized.
If the above operation is nor performed properly, the ERROR display is highlighted.
If performed properly, the above data is stored and the COMPLETE is highlighted.
If performed properly, the above data is stored and the COMPLETE is highlighted.
Note
AR-405
8 – 49
1/21/1999
Click on the first or last page to see other AR-405 (serv.man10) service manuals if exist.