Sharp AR-405 (serv.man10) Service Manual ▷ View online
Operation/
Procedure
Procedure
When the maintenance cycle is selected with the key, the selected key is highlighted. The maintenance message
is displayed in every selected cycle.
When FREE is selected, the maintenance display is not shown.
is displayed in every selected cycle.
When FREE is selected, the maintenance display is not shown.
(AR-2XX/3XX series)
(AR-4XX series)
Note
22
22 - 1
Purpose
Operation data output/Check (Display/Print)
Function
(Purpose)
(Purpose)
Used to check the print out count of each section in each operation mode.
(Used to check the maintenance timing.)
(Used to check the maintenance timing.)
Section
Item
Counter
Operation/
Procedure
Procedure
FAXandPDA/ZRare only for Japan models.
nnnnnnnn : Counter value
Note
22 - 2
Purpose
Operation data output/Check (Display/Print)
Function
(Purpose)
(Purpose)
Used to check the total numbers of misfeed and troubles. (When the number of misfeed is considerably great, it
is judged as necessary for repair. The misfeed rate is obtained by dividing this count value with the total counter
value.)
is judged as necessary for repair. The misfeed rate is obtained by dividing this count value with the total counter
value.)
Section
Item
Trouble
Operation/
Procedure
Procedure
MACHINE JAM : The number of paper jam troubles occurred in the sections other than the document feeders
(SPF/ADF/RADF).
(SPF/ADF/RADF).
AR-405
1/21/1999
8 – 26
DF JAM
:
The number of paper jam troubles occurred in the document feeders (SPF/ADF/RADF).
TROUBLE :
Total number of troubles
nnnnnnnn : Counter value
Note
22 - 3
Purpose
Operation data output/Check (Display/Print)
Function
(Purpose)
(Purpose)
Used to check the misfeed positions and the number of misfeed in each position. (If the number of misfeed is
considerably great, it can be judged as necessary for repair.) (Sections other than ADF/RADF/SPF sections)
considerably great, it can be judged as necessary for repair.) (Sections other than ADF/RADF/SPF sections)
Section
Item
Trouble
Mis-feed
Operation/
Procedure
Procedure
The misfeed history sections indicated by the sensors and detectors are displayed sequentially from the latest one.
Max. 40 items of information can be stored, and the oldest one is deleted sequentially.
The trouble position may be presumed with this data.
Max. 40 items of information can be stored, and the oldest one is deleted sequentially.
The trouble position may be presumed with this data.
Note
22 - 4
Purpose
Operation data output/Check (Display/Print)
Function
(Purpose)
(Purpose)
Used to check the total trouble (self diag) history.
Section
Item
Trouble
Operation/
Procedure
Procedure
The trouble history error codes are displayed sequentially from the latest one.
Max. 40 items of information can be stored, and the oldest one is deleted sequentially.
The machine condition can be presumed according to this data.
Max. 40 items of information can be stored, and the oldest one is deleted sequentially.
The machine condition can be presumed according to this data.
Note
AR-405
8 – 27
1/21/1999
22 - 5
Purpose
Others
Function
(Purpose)
(Purpose)
Used to check the ROM version of each unit (section).
Section
Item
Software
Operation/
Procedure
Procedure
The ROM version of each section can be checked.
If there is any problem in the software, check the ROM version of each section with this simulation and replace
with a new version if necessary.
FAX is for Japan model only.
If there is any problem in the software, check the ROM version of each section with this simulation and replace
with a new version if necessary.
FAX is for Japan model only.
Note
22 - 6
Purpose
Operation data output/Check (Display/Print)
Function
(Purpose)
(Purpose)
Used to output the list of the setting and adjustment data (simulations, FAX soft switch, counters).
Section
Item
Data
Adjust/Setting data
Operation/
Procedure
Procedure
When installing or servicing, execute this simulation to print and store the adjustment values and setting data for
use in the next servicing. (Memory trouble, PWB replacement, etc.)
use in the next servicing. (Memory trouble, PWB replacement, etc.)
In this case, the print conditions can be set optionally.
1. Select the setup item.
(The selected item is highlighted.)
2. Set the item and conditions with the 10-key pad.
3. Press the [EXECUTE] key to print various data.
A: Print out items (Contents)
1: All adjustment values and setup data
2: All counter data
3: FAX soft switch setup data (Japan only)
4: Print density adjustment data
5: Adjustment and setup data of the other simulations
1: All adjustment values and setup data
2: All counter data
3: FAX soft switch setup data (Japan only)
4: Print density adjustment data
5: Adjustment and setup data of the other simulations
B: Paper feed mode
1: Manual paper feed
2: Upper paper feed tray
3: Lower paper feed tray
4: Desk upper paper feed tray
5: Desk middle paper feed tray
6: Desk lower paper feed tray
7: Large capacity paper feed tray
1: Manual paper feed
2: Upper paper feed tray
3: Lower paper feed tray
4: Desk upper paper feed tray
5: Desk middle paper feed tray
6: Desk lower paper feed tray
7: Large capacity paper feed tray
AR-405
1/21/1999
8 – 28
Note
22 - 7
Purpose
User data output/Check (Display/Print)
Function
(Purpose)
(Purpose)
Used to display the key operator code. (This simulation is used when the customer forgets the key operator code.)
Section
Item
Data
User data
Operation/
Procedure
Procedure
nnnnn : Key operator code
Note
22 - 8
Purpose
Operation data output/Check (Display/Print)
Function
(Purpose)
(Purpose)
Used to check the number of use of the staple, the ADF, RADF, SPF, and scanning.
Section
Item
Counter
Operation/
Procedure
Procedure
This data is used to check the use frequency of each section. According to this data, maintenance is executed.
nnnnnnnn : Counter value
Note
AR-405
8 – 29
1/21/1999
Click on the first or last page to see other AR-405 (serv.man10) service manuals if exist.