Sharp AR-163 (serv.man4) Service Manual ▷ View online
C. Copy lamp
D. Lens unit
Note: Do not remove screws which are not indicated in the figure. If
the height of the base plate is changed, it cannot be adjusted
in the market.
in the market.
Lens unit attachment reference
( 3 )
( 1 )
( 1 )
( 2 )
Attach the lens unit so that the lens unit number on the lens
adjustment plate is aligned with the scribe line on the base plate.
adjustment plate is aligned with the scribe line on the base plate.
Example: Lens unit number –2.8
Attach the lens unit at 2 scales in the paper exit direc-
tion from the reference line.
tion from the reference line.
Note: Never touch the other screws than the unit attachment
screw.
The lens unit is supplied only in a whole unit.
The lens unit is supplied only in a whole unit.
3. Fusing section
No.
Contents
A
Fusing unit
B
Thermostat
C
Thermistor
D
Heater lamp
E
Upper heat roller
F
Separation pawl
G
Lower heat roller
A. Fusing unit removal
B. Thermostat
(2)
(3)
(1)
(1)
( 2 )
( 3 )
( 1 )
( 1 )
AR-162 [11] DISASSEMBLY AND ASSEMBLY 10/5/2000
AR-162 DISASSEMBLY AND ASSEMBLY – 2
C. Thermistor
Installation: Check that the thermistor is in contact with the upper
heat roller.
D. Heater lamp
Assembly: Insert the spring (A) into the hole (B) in the fusing frame.
Assembly: Put the paper guide earth spring (A) under the paper
guide (B) before fusing.
Disassembly: There are three pawls on the fusing cover. Remove
the screws and slide the fusing cover to the right to
remove.
The heater lamp is fixed on the fusing cover with a
screw. Slide the fusing cover to the front and remove
the screw, then remove the heater lamp.
remove.
The heater lamp is fixed on the fusing cover with a
screw. Slide the fusing cover to the front and remove
the screw, then remove the heater lamp.
Assembly:
Put the fusing harness (A) on the heater lamp (B) as
shown in the figure and fix them together.
Place the fusing harness inside the rib (C).
shown in the figure and fix them together.
Place the fusing harness inside the rib (C).
( 2 )
( 1 )
(A)
(B)
(2)
(1) (2)
(3)
(4)
(3)
(B)
(A)
( 6 )
( 5 )
( 8 )
( 9 )
( 7 )
( 8 )
( 1 0 )
( A )
( B )
( C )
AR-162 [11] DISASSEMBLY AND ASSEMBLY 10/5/2000
AR-162 DISASSEMBLY AND ASSEMBLY – 3
E. Upper heat roller
*
Apply heat-resistive grease (UKOG-0235FCZZ).
F. Separation pawl
G. Lower heat roller
Assembly: When installing the paper guide (3) before fusing, tighten
the paper guide fixing plate so that the paper guide fixing
plate (2) is in contact with the frame bottom section (A)
under fusing.
plate (2) is in contact with the frame bottom section (A)
under fusing.
*
Apply heat-resistive grease (UKOG-0235FCZZ).
( 2 )
( 1 )
(2)
(1)
(2)
(2)
(1)
(1)
(3)
(3)
(4)
(3)
(3)
∗
∗
(1)
(4)
(1)
(2)
(3)
(2)
(A)
∗
∗
AR-162 [11] DISASSEMBLY AND ASSEMBLY 10/5/2000
AR-162 DISASSEMBLY AND ASSEMBLY – 4
4. Paper exit section
No.
Content
A
Front cabinet unit/Right cabinet unit
B
Ozone filter
C
Paper exit unit
D
Transport roller
E
Paper exit roller
A. Front cabinet unit, right cabinet disassembly
B. Ozone filter
C. Paper exit unit
D. Transport roller
( 3 )
( 2 )
( 1 )
( 1 )
( 6 )
( 6 )
( 5 )
( 4 )
( 5 )
( 5 )
( 1 )
( 2 )
( 1 )
(1)
(2)
(3)
(3)
( 7 )
( 6 )
( 8 )
( 6 )
( 8 )
( 1 0 )
( 9 )
( 9 )
AR-162 [11] DISASSEMBLY AND ASSEMBLY 10/5/2000
AR-162 DISASSEMBLY AND ASSEMBLY – 5
Click on the first or last page to see other AR-163 (serv.man4) service manuals if exist.