DOWNLOAD Sharp AR-163 (serv.man4) Service Manual ↓ Size: 2.59 MB | Pages: 71 in PDF or view online for FREE

Main 
code

Sub 

code

Contents

Details of operation

Initial 
value

Set range

41

3

Document sensor light
reception level display

Used to display the light reception level and the detection level of the
document sensor. (The sensor level adjusted with SIM 41-2 is displayed.)

42

1

Developing counter clear

Used to clear the Developing counter. 

∗

2

43

1

Fusing temperature setting

Used to display the current setting of the fusing temperature at right.
After selecting the fusing temperature with the magnification ratio display
key, press the start key, and the set value is stored. The set range is
155 

∼

 190˚C. Use the magnification ratio key to adjust the value by –5˚C.

170

155 

∼

 190

46

1

Copy density level
adjustment

After completion of warmup, shading is performed and the currently set
copy density level is displayed. For the adjustment procedure, refer to
the previous descriptions.

48

1 

∼

 99

19

AE mode picture quality
change

The currently set AE picture quality mode (gamma table) is displayed
with the following set values. Enter a set value and press the START
key, then the set value will be inputted.

1

1 

∼

  2

48

1

Main scanning (front/rear)
direction magnification
ratio adjustment
(Copy/FAX/OC-SPF
common)

After completion of warmup, shading is performed and the currently set
main scanning (front/rear) direction magnification ratio adjustment and
the OC mode document center off adjustment are performed. For the
adjustment procedure, refer to the previous descriptions.

58

1 

∼

 99

2

OC mode sub scanning
direction magnification
ratio adjustment in
copying

After completion of warmup, shading is performed and the currently set
OC mode sub scanning direction magnification ratio adjustment in
copying is performed. For the adjustment procedure, refer to the
previous descriptions.

50

1 

∼

 99

∗

2: Display after clearing each counter 

000 (0.75 sec) 

→

 Blank (0.35 sec) 

→

 000 (0.75 sec) 

→

 Blank (1.0 sec) 

→

 Repetition

Key operation

Display

Light reception/Detection
level select: Magnification
ratio display key

Display at the 3rd digit
“A”:

Light reception level display

“b”:

Document detection level display

Sensor select: Auto
magnification ratio select key

Sensor A: A3 (11 

×

 17) document

size LED
Sensor B: A4 (8 1/2 

×

 14) document

size LED
Sensor C: A4R (8 1/2 

×

 11)

document size LED
Sensor D: B4 (8 1/2 

×

 5 1/2)

document size LED

Key operation

Fusing temperature select: Magnification ratio display key

Key operation

Display

Mode select:
Exposure mode select
key
Copy density level:
Copy quantity keys

<LED lighting at each mode selection>

Auto mode: AUTO LED

Manual mode: MANUAL LED

Photo mode: PHOTO LED

Toner save mode: MANUAL + PHOTO LED

AETS mode: AUTO + PHOTO LED

Key operation/Display

1: Picture quality priority mode

2: Toner consumption priority mode

Key operation

Display

Adjustment mode
select: Magnification
ratio display key

Auto magnification ratio adjustment:
 AUTO 

LED

Manual main scanning
direction magnification
ratio adjustment
Set value: Copy
quantity keys

Manual magnification ratio adjustment:
 MANUAL 

LED

OC mode document center off adjustment:
 PHOTO 

LED

Key operation

OC mode sub scanning direction magnification ratio in copying:
                                              Copy  quantity  keys

AR-162 SIMULATIONS – 10

Main 
code

Sub 

code

Contents

Details of operation

Initial 
value

Set range

48

5

SPF mode sub scanning
direction magnification
ratio adjustment in
copying

After completion of warmup, shading is performed and the currently set
SPF mode sub scanning direction magnification ratio adjustment in
copying is performed. For the adjustment procedure, refer to the
previous descriptions.

33

45

1 

∼

 99

50

1

Copy image position
adjustment

After completion of warmup, shading is performed and the currently set
value is displayed. For the adjustment procedure, refer to the previous
descriptions.

55
77

18

48
40
18

18

20

55
60

60

1 

∼

 99

10

Paper off center
adjustment

After completion of warmup, shading is performed and the currently set
off center adjustment of each paper feed port is displayed. For the
adjustment procedure, refer to the previous descriptions.

50

1 

∼

 99

13

OC mode document off
center adjustment

After completion of warmup, shading is performed and the currently set
off center adjustment value for the document in OC reading is displayed.
For the adjustment procedure, refer to the previous descriptions.

50

1 

∼

 99

16

SPF mode document off
center adjustment

After completion of warmup, shading is performed and the currently set
off center adjustment value for the document in SPF reading is
displayed. For the adjustment procedure, refer to the previous
descriptions.

61

1 

∼

 99

Key operation

Display

Adjustment mode select:
  Exposure mode select key

Auto: SPF mode sub scanning
direction magnification ratio in copying

Set value:
  Copy quantity keys

Manual: RSPF mode sub scanning
direction magnification ratio in copying

Key operation

Display

Adjustment mode
select:
 Exposure 

mode

 select 

key

Set value:
  Copy quantity keys

Auto: Copy lead edge adjustment
Manual: SPF lead edge adjustment
<Not used>
Photo: Main cassette lead edge void
adjustment
Auto + Manual: Left edge void adjustment
Auto + Photo: Rear edge void adjustment
Auto + Manual + Photo: Option cassette
lead edge void adjustment
Manual + Photo: Multi bypass tray lead
edge void adjustment
None: Duplex lead edge void adjustment
<Only AR-206/207>
Exposure 1: Print start position adjustment
Exposure 3: Duplex lead edge adjustment
<Only AR-206/207>
Exposure 5: Duplex rear edge void
adjustment <Only AR-206/207>

Key operation

Display

Paper feed port tray
select: Tray select key

Main cassette: 
  Main cassette select LED

Off center adjustment
value: numeric keys

Manual paper feed: 
  Manual feed select LED

No. 2 cassette: 
  No. 2 cassette select LED

No. 3 cassette: 
  No. 3 cassette select LED
  <Only when an option is installed>

No. 4 cassette: 
  No. 4 cassette select LED
  <Only when an option is installed>

Duplex: None <Only AR-206/207>

Key operation

Off center adjustment value: Copy quantity keys

Key operation

Off center adjustment value: Copy quantity keys

AR-162 SIMULATIONS – 11

Main 
code

Sub 

code

Contents

Details of operation

Initial 
value

Set range

50

18

Duplex memory reverse
position adjustment

After completion of warmup, shading is performed and currently set
value is displayed

58

1 

∼

 99

50

19

Duplex rear edge void
adjustment

After completion of warmup, shading is performed and currently set
value is displayed.

37

52
70

1 

∼

 99

51

2

Resist amount adjustment

After completion of warmup, shading is performed and the currently set
resist amount adjustment value is displayed.

50

1

50
50
48

1 

∼

 99

(6 

∼

 94 for

the duplex

only)

63

1

Shading data check

The copy lamp is shifted to the shading position and it is lighted with the
reference voltage at AD conversion fixed (Vref– = 0.5V, Vref+ = 4.5V).
The level of one pixel at the center at that time is displayed.

64

1

Self print mode

Disregards the optical system and performs self printing in 1 by 2mode.

67

14

Printer Flash ROM
Data Download
<Only when printer
function is installed>

The machine enters the version up mode of the printer control PWB
flash ROM.
For details, refer to the later.

Key operation

Memory reverse position adjustment value:
    Copy quantity keys

Key operation

Display

Adjustment mode select:
  Exposure mode select key

Auto: SPF/R-SPF rear edge void

Set value:
  Copy quantity keys

Manual: R-SPF off center
Photo: R-SPF lead edge void

Key operation

Display

Resist amount adjustment:
Copy quantity keys
Adjustment mode select:
Exposure mode select key

Auto: Main cassette
Manual: 2nd tray
Photo: Manual feed tray
Auto + Manual: Duplex <Only AR-206/207>
Auto + Photo: RSPF <Only when an
option is installed>

Display

Display section: Shading data

AR-162 SIMULATIONS – 12

The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.

This copier has the following user programs.

Program name

Program

No

Description

Default

Parameters

Auto clear time

1

Sets the auto clear time. The copier returns to the initial settings
when the auto clear time elapses after the last copy is made.

60sec

0(OFF)

1(30sec)

2(60sec)

3(90sec)

4(120sec)

5(10sec)

Preheat mode

2

Sets the time that elapses before the copier enters the preheat
mode after any operation is made.

90sec

0(OFF)

1(30sec)

2(60sec)

3(90sec)

4(120sec)

Auto power shut-
off timer 

3

Sets the time that elapses before the copier enters the auto
power shut-off mode after any operation is made.

30min

1(30min)

2(60min)

3(90min)

4(120min)

5(240min)

Stream feeding
mode*

4

Enables or disables  the stream feeding mode when an optional
SPF or RSPF is installed.

OFF

0(OFF)

1(ON)

Auto power shut-
off setting

5

Enables or disables the auto power shut-off mode.

ON

0(OFF)

1(ON)

Border line for 2
in 1 or 4 in 1*

6

Enables or disables the border line which is printed in 2 in 1 or 4
in 1 copying when an electronic sorting kit and an SPF or RSPF
are installed.

OFF

0(OFF)

1(ON)

Rotation copy*

7

Enables or disables rotation of original images.

ON

0(OFF)

1(ON)

Auto paper
select mode

8

Enables or disables the auto paper selection.

ON

0(OFF)

1(ON)

Auto tray
switching

9

Enables or disables the automatic tray switching which occurs
when paper in a tray runs out. (This switching cannot switch to
the bypass tray.)

ON

0(OFF)

1(ON)

Auditing mode

10

Enables or disables the auditing mode, which controls access to
copier.

OFF

0 (OFF)

1 (ON)

Account number
entry

11

Registers accounts for auditing mode.

–

–

Account number
change

12

Changes account numbers for auditing mode.

–

–

Account number
deletion

13

Deletes accounts for auditing mode.

–

–

Number of
copies per
account

14

Displays the total number of copies made against account
numbers.

–

–

Resetting account

15

Resets all audit accounts or resets any desired individual account.

–

–

Erase width
adjustment*

16

Sets the amount of the edge erase and center erase areas.

10mm[1/2"]

0(0mm[0"])

1(5mm[1/4"])

2(10mm[1/2"])

3(15mm[3/4"])

4(20mm[1"])

AR-162 USER PROGRAMS – 1