DOWNLOAD Sharp AR-163 (serv.man4) Service Manual ↓ Size: 2.59 MB | Pages: 71 in PDF or view online for FREE

Main 
code

Sub 

code

Contents

Details of operation

Initial 
value

Set range

22

16

Duplex print counter
display
<Only AR-206/207>

Used to display the current duplex print counter value. 

∗

1

17

Copy counter display

Used to display the current copy counter value. 

∗

1

18

Printer counter display
<Only when a printer
function is installed>

Used to display the current printer counter value. 

∗

1

19

Electronic sort counter
display <Only when an E-
sort function is
installed>

Used to display the current electronic sort counter value. 

∗

1

21

Scanner counter display

Used to display the current scanner counter value.

24

1

JAM memory, JAM
counter clear

Used to clear the JAM memory and the JAM counter. 

∗

2

2

Trouble memory clear

Used to clear the trouble memory. 

∗

2

4

SPF counter clear
<Only when an
SPF/RSPF is installed>

Used to clear the SPF counter. 

∗

2

5

Duplex counter clear
<Only AR-206/207>

Used to clear the duplex counter. 

∗

2

6

Paper feed counter clear

Used to clear the paper feed counter. 

∗

2

7

Drum counter clear

Used to clear the drum counter. 

∗

2

8

Copy counter clear

Used to clear the copy counter. 

∗

2

9

Printer counter clear
<Only when a printer
function is installed>

Used to clear the printer counter. 

∗

2

10

Electronic sort counter
clear <Only when an E-
sort function is
installed>

Used to clear the electronic sort counter. 

∗

2

13

Scanner counter clear

Used to clear the scanner counter. 

∗

2

25

1

Main motor operation
check

Execute the simulation with the developer cartridge removed, and the
main motor will rotate for 30 sec. At that time, the cooling motor rotates
at a low speed.

10

Polygon motor operation
check

Used to drive the polygon motor for 30 sec.

∗

2: Display after clearing each counter 

000 (0.75 sec) 

→

 Blank (0.35 sec) 

→

 000 (0.75 sec) 

→

 Blank (1.0 sec) 

→

 Repetition

AR-162 SIMULATIONS – 6

Main 
code

Sub 

code

Contents

Details of operation

Initial 
value

Set range

26

1

Option switch display

Used to display the installed option on the operation panel. (The LED
corresponding to the installed option is lighted.)

3

Auditor setting

Used to display the current auditor setting with the numbers at right. 
After entering the set value, press the start key, and the set value is
stored.

0

0 

∼

  2

5

Counter mode setting

Used to set the print counter mode in A3 or 11" 

×

 17".

Used to display the currently set counter value with the numbers at right.
After entering the set value, press the start key, and the set value is
stored.

0

0 

∼

  3

Key

operation

Display

Display
select: 
 
Magnification 
ratio display
key

<Lighting with an option installed>

Shifter: Paper empty LED

Job separator: JAM LED

SPF: SPF select LED

RSPF: SPF JAM LED

Duplex mode: Main cassette select LED

Simplex mode: Multi manual paper feed select LED

MCU JMPER1: Top of the magnification ratio display

MCU JMPER2: 2nd of the magnification ratio display

MCU JMPER3: 3rd of the magnification ratio display

MCU JMPER7: 4th of the magnification ratio display

MCU JMPER7: 5th of the magnification ratio display

MCU JMPER7: 6th of the magnification ratio display

MCU JMPER7: 7th of the magnification ratio display

MCU JMPER8: Bottom of the magnification ratio
               display

Cassette (2nd step): No. 2 cassette select LED

Cassette (3rd step): No. 3 cassette select LED

Cassette (4th step): No. 4 cassette select LED

Memory installed: Paper empty LED

FAX: JAM LED

Printer: Main body JAM LED

ERDH: Main cassette select LED

16CPM: SPF JAM LED

20CPM: SPF select LED

Document sensor: Auto paper select LED

Key operation/Display

0: Built-in auditor

1: Coin vendor

2: Others

Key operation/Display

0: Total/Developer = 2 counts

Maintenance = 2 counts

1: Total/Developer = 1 count

Maintenance = 2 counts

2: Total/Developer = 2 counts

Maintenance = 1 count

3: Total/Developer = 1 count

Maintenance = 1 count

AR-162 SIMULATIONS – 7

Main 
code

Sub 

code

Contents

Details of operation

Initial 
value

Set range

26

6

Destination setting

Used to display the current destination setting with the numbers at right.
After entering the set value, press the start key, and the set value is
stored.

0

0 

∼

 11

7

CRUM set value display

The currently set value of CRUM is displayed with the following numbers:

10

Model name setting

Used to set the model name of the machine used with the following
numbers. After entering the set value, press the start key and the set
value is stored.

0

0 

∼

 30

22

Language setting

Used to display the current setting of the language information with the
number at right. After entering the set value, press the start key, and the
set value is stored.

0

0 

∼

  7

30

CE mark conformity
control setting

Used to display the current setting of CE mark conformity control with
the number at right. After entering the set value, press the start key, and
the set value is stored.

0

0 

∼

  1

32

Fan rotation duty change
state setup

The currently set fan motor rotation duty is displayed with the following
numbers. After entering the set value, press the start key to store the
set value.

0

0.1

Key operation/Display

  0: Japan

  8: EX AB series

  1: USA (Inch series)

  9: EX inch series (FC conformity)

  2: Canada (Inch series)

10: EX AB series (FC conformity)

 3: Germany 1 (AB series)

    (Australia, Newzealand)

  4: UK (AB series)

11: China (AB series)

  5: Not used

12: Taiwan (AB series)

  6: France (AB series)

13: Germany 2 (AB series)

  7: EX inch series

Key operation/Display

  0: Not set

  3: BTA-C

 1: BTA-A

99: Conv

 2: BTA-B

Key operation/Display

 0: AL-1600

11: AR-N200

23: AR-162/S162

 1: AL-1610

12: AR-N205

24: AR-163/S163

 2: AL-1620

13: AL-1621

25: AR-201S

 3: AL-1640/AL-1641

14: AL-1650

26: AR-201/S201

 4: AR-160/AR-S160

15: AL-1670

27: AR-206/S206

 5: AR-161/AR-S161

16: AR-F200

28: AR-207

 6: AR-200S

17: DM-2000

29: ARF161

 7: AR-200/AR-S200

18: DM-2005

30: ARF201

 8: AR-205/AR-S205

19: DM-2010

 9: AR-F160

20: DM-2015

10: AR-F205

Key operation/Display

0: Japanese

4: Italian

1: English

5: Dutch

2: French

6: Swedish

3: German

7: Spanish

Key operation/Display

0: CE mark control OFF

1: CE mark control ON

Key operation/Display

0: Operating 50%, standby 30%

1: Operating 80%, standby 50%

AR-162 SIMULATIONS – 8

Main 
code

Sub 

code

Contents

Details of operation

Initial 
value

Set range

26

37

Cancel of stop at
developer life over

The currently set value is displayed. Enter a set value and press the
START key, then the set value is registered.

1

0 

∼

  1

38

Cancel of stop at drum
life over

The currently set value is displayed. After entering the set value, press
the start key to store the set value.

0

0 

∼

  1

42

Transfer timing adjustment

After completion of warm up, shading is performed and the currently set
transfer timing adjustment value is displayed.

5

1, 3, 5, 7, 9

50

Black-white reversion
function setup

The current setup of black-white reversion is displayed with the following
numbers. After entering the set value, press the start key to store the
set value.

0

0.1

51

Sort/Group copy
temporary stop function
setup
<Only when an E-sort
function is installed>

Used to set whether temporary stop for every 250-sheet print (150-sheet
print when the job separator is installed) is made or not during copying
with the sort/group function. The current setup is displayed with the
following numbers. After entering the set value, press the start key to
store the set value.

1

0.1

30

1

Machine sensor operation
check

Used to check the sensors in the machine transport system with LED on
the operation panel.

41

2

OC document sensor
adjustment
<Other than AR-162>

Used to read the document sensor input value with paper and perform
the sensor detection level adjustment. For the adjustment procedure of
the document sensor input value, refer to the previous descriptions.

Key operation/Display

0: Stops the machine at developer life over.

1: Does not stop the machine at developer life over.

Key operation/Display

0: The machine stops at drum life over.

1: The machine does not stop at drum life over.

Key operation

Transfer timing adjustment value: Copy quantity keys

“1”: 240 ms

“3”: 260 ms

“5”: 280 ms

“7”: 300 ms

“9”: 320 ms

Key operation/Display

0: Black-white reversion function enabled

1: Black-white reversion function disabled

Key operation/Display

0: Does not stop.

1: Stops.

Display

<Lighting at sensor ON>

Paper entry sensor: Machine position JAM LED

Duplex sensor: SPF JAM LED <Only AR-206/207>

Paper exit sensor: JAM LED

No. 2 cassette transport sensor: No. 2 cassette position LED

No. 3 cassette transport sensor: No. 3 cassette position LED
<Only when an option is installed>

No. 4 cassette transport sensor: No. 4 cassette position LED
<Only when an option is installed>

Drum initial SW: DRUM LED

AR-162 SIMULATIONS – 9