Sharp AL-2020 (serv.man5) User Manual / Operation Manual ▷ View online
67
8
C: Misfeed in the transport area
1
Lower the fusing unit release lever.
See "B: Misfeed in the fusing area" (p.66).
2
Open the front cover.
To open the front cover, see "INSTALLING THE TD CARTRIDGE" (p.10).
3
Rotate the roller rotating
knob in the direction of the
arrow and gently remove
the misfed paper from the
exit area.
knob in the direction of the
arrow and gently remove
the misfed paper from the
exit area.
4
Raise the fusing unit release lever, close the front cover and
then close the side cover by pressing the round projections
near the side cover open button. The misfeed (
then close the side cover by pressing the round projections
near the side cover open button. The misfeed (
) indicator will
go out and the start (
) indicator will light up.
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order, the
covers may be damaged.
then close the side cover. If the covers are closed in the wrong order, the
covers may be damaged.
Roller rotating knob
68
D: Misfeed in the SPF (AL-2040)
An original misfeed may occur at one of three locations: if the misfed original is seen
from the document feeder tray, (A) in the document feeder tray; if the misfed original is
not seen from the document feeder tray, (B) in the exit area or (C) under the document
feeder cover. Remove the misfed original following the instructions for each location.
from the document feeder tray, (A) in the document feeder tray; if the misfed original is
not seen from the document feeder tray, (B) in the exit area or (C) under the document
feeder cover. Remove the misfed original following the instructions for each location.
(A) Open the document feeder cover and pull the misfed original out from the
document feeder tray. Press the SPF jam release lever (see below) while
you remove the original. Close the document feeder cover. Open and close
the SPF to clear the SPF misfeed (
you remove the original. Close the document feeder cover. Open and close
the SPF to clear the SPF misfeed (
) indicator. If the misfed original
cannot be easily removed, proceed to (C).
(B) Open the SPF and rotate the roller to remove the misfed original from the
exit area. If the misfed original cannot be easily removed, proceed to (C).
(C) If the original does not move easily into the exit area, remove it in the
direction of the arrow while rotating the knob.
After removing the jammed paper, be sure to press the clear key to clear
the misfeed error state.
the misfeed error state.
Document feeder cover
SPF jam release lever
Roller
69
8
IF A PAPER MISFEED OCCURS IN THE MAIN UNIT
WHEN USING THE SPF (AL-2040)
WHEN USING THE SPF (AL-2040)
If a paper misfeed occurs in the main unit paper path when making copies with
original(s) through the SPF, the SPF will automatically stop scanning. Manually
remove the misfed paper(s) in the main unit. You can check the number of originals
that must be returned to the document feeder tray in the display on the operation
panel. Follow the steps below to display the number of originals to be returned.
original(s) through the SPF, the SPF will automatically stop scanning. Manually
remove the misfed paper(s) in the main unit. You can check the number of originals
that must be returned to the document feeder tray in the display on the operation
panel. Follow the steps below to display the number of originals to be returned.
1
When a paper misfeed occurs in the
main unit, the SPF stops and the ZOOM
indicator blinks.
main unit, the SPF stops and the ZOOM
indicator blinks.
The remaining number of sets will blink in the
display.
Be sure to remove misfed paper(s) at the main
unit paper path first. Then follow the step 2
onwards.
display.
Be sure to remove misfed paper(s) at the main
unit paper path first. Then follow the step 2
onwards.
2
Remove any originals that have not yet
been scanned from the document
feeder tray.
been scanned from the document
feeder tray.
For the original(s) stuck in the SPF, do not
remove manually. This may cause a machine
malfunction. See the step 3.
remove manually. This may cause a machine
malfunction. See the step 3.
3
Press the copy ratio display (%) key.
The originals that were being scanned in the SPF
will be discharged and the number of original
sheets to be returned will blink in the display.
Place the displayed number of original sheets
back in the document feeder tray together with
the original sheets removed in step 2.
will be discharged and the number of original
sheets to be returned will blink in the display.
Place the displayed number of original sheets
back in the document feeder tray together with
the original sheets removed in step 2.
The following procedure omits removal of the misfeed. Be sure to remove
the misfeed before displaying the number of originals to be returned. For
the misfeed removal procedure, see "MISFEED REMOVAL" (p.64).
the misfeed before displaying the number of originals to be returned. For
the misfeed removal procedure, see "MISFEED REMOVAL" (p.64).
If "SPF automatic original discharge time" is enabled in the user
programs, the originals in the SPF will be automatically discharged after
the set time elapses. ("USER PROGRAMS" (p.55))
programs, the originals in the SPF will be automatically discharged after
the set time elapses. ("USER PROGRAMS" (p.55))
A5
A4
A4
B5
A4
A5
A5
A4
A4
B5
A4
A5
A4
B5
A5
A5
Display of number of original
sheets to be returned
sheets to be returned
70
SPECIFICATIONS
AL-2020
AL-2040
Type
Digital multifunctional system, desk-top type
Copy / printer system
Dry, electrostatic transfer
Originals
Sheets, bound documents
Printer function
Available - Cable required (USB) Available - Cable required (USB
or LAN)
Scanner function
Available - Cable required (USB)
Paper tray
250 sheets x 1
Multi-bypass tray
50 sheets
Paper output tray
200 sheets *
1
SPF
-
SPF
Original
sizes
sizes
Document
glass/SPF
glass/SPF
Max. A4
Original
feed
feed
Document
glass
glass
1 sheet
SPF
-
Up to 50 sheets
Copy / printing size
A6 to A4 *
2
Image loss
Max. 4mm *
3
Max. 4.5mm *
4
Copy speed *
5
20 pages/min. (A4)
Print speed *
6
16 pages/min. (A4)
Continuous copying
Max. 99 pages subtractive counter
First-copy time *
7
(Approximately)
8.0 seconds (When user program 24 is set to OFF)
10.7 seconds (When user program 24 is set to ON)
(paper: A4, exposure mode: AUTO, copy ratio: 100%)
10.7 seconds (When user program 24 is set to ON)
(paper: A4, exposure mode: AUTO, copy ratio: 100%)
Copy ratio
Document glass:
Variable: 25% to 400% in 1% increments (total 376 steps)
Fixed: 50%, 70%, 86%, 100%, 141%, 200%
SPF:
Variable: 50% to 200% in 1% increments (total 151 steps)
Fixed: 50%, 70%, 86%, 100%, 141%, 200%
Variable: 25% to 400% in 1% increments (total 376 steps)
Fixed: 50%, 70%, 86%, 100%, 141%, 200%
SPF:
Variable: 50% to 200% in 1% increments (total 151 steps)
Fixed: 50%, 70%, 86%, 100%, 141%, 200%
Exposure
system
system
Document
glass
glass
Moving optical source, slit exposure (stationary platen) with
automatic exposure
automatic exposure
SPF
-
Moving original
Fusing system
Heat rollers
Development system
Magnetic brush development
Light source
Cold cathode fluorescent lamp
Resolution
Copier
600 x 300dpi (Auto/Manual mode)
600 x 600dpi (Photo mode)
600 x 600dpi (Photo mode)
Printer
600dpi
Scanner
600 x 1200dpi
Gradation
Scan
256 levels
Output
2 levels
9
APPENDIX
Click on the first or last page to see other AL-2020 (serv.man5) service manuals if exist.