Sharp AL-1644 (serv.man17) User Manual / Operation Manual ▷ View online
55
TROUBLESHOOTING
5
Section C
Remove the misfed original from the exit area.
If the misfed original cannot be easily removed
from the exit area, open the moveable part of the
document feeder tray and remove the original.
from the exit area, open the moveable part of the
document feeder tray and remove the original.
2
Open and close the SPF to make the
misfeed location indicator stop
blinking.
misfeed location indicator stop
blinking.
You can also make the
misfeed indicator stop
blinking by opening and
closing the feeding roller
cover or the right side
cover.
misfeed indicator stop
blinking by opening and
closing the feeding roller
cover or the right side
cover.
3
Return the originals indicated by the
minus number in the display to the
document feeder tray and press the
[START] key (
minus number in the display to the
document feeder tray and press the
[START] key (
).
Copying will resume from the originals that still
remained when the misfeed occurred.
remained when the misfeed occurred.
MISFEED IN THE BYPASS TRAY
1
Gently pull the misfed paper out.
2
Open and close the side cover.
The misfeed indicator
(
(
) will go out.
• When closing the side cover, press down
on the handle.
• If the misfeed indicator (
) does not stop
blinking, check for torn pieces of paper in
the machine.
the machine.
Note
AL-1633_1644_EX.book 55 ページ 2003年10月23日 木曜日 午後8時21分
56
TROUBLESHOOTING
MISFEED IN THE MACHINE
1
Open the bypass tray and the side
cover.
cover.
2
Check the misfeed location. Remove
the misfed paper following the
instructions for each location in the
illustration below.
the misfed paper following the
instructions for each location in the
illustration below.
A. Misfeed in the paper feed area
1
Push gently on both ends of the front
cover and open it.
cover and open it.
2
Carefully remove the misfed paper.
Turn the roller rotating knob in the
direction of the arrow to assist in
removing it.
Turn the roller rotating knob in the
direction of the arrow to assist in
removing it.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
3
Close the front cover and side cover.
The misfeed indicator
(
(
) will go out.
If paper is misfed here, go to "B.
Misfeed in the fusing area".
Misfeed in the fusing area".
If paper is misfed here, go to "A.
Misfeed in the paper feed area".
Misfeed in the paper feed area".
If the misfed paper is visible here,
go to "C. Misfeed in the transport
area".
go to "C. Misfeed in the transport
area".
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
Do not touch the drum cartridge (green
portion) when removing the misfed paper.
Doing so may damage the drum and cause
smudges on copies.
portion) when removing the misfed paper.
Doing so may damage the drum and cause
smudges on copies.
Roller rotating knob
Warning
Caution
• When closing the front cover, gently hold
both ends.
• When closing the side cover, press on the
handle.
• If the misfeed indicator (
) does not stop
blinking, check for torn pieces of paper in
the machine.
the machine.
Note
AL-1633_1644_EX.book 56 ページ 2003年10月23日 木曜日 午後8時21分
57
TROUBLESHOOTING
5
B. Misfeed in the fusing area
1
Push gently on both ends of the front
cover and open it.
cover and open it.
2
Turn the roller rotating knob in the
direction of the arrow.
direction of the arrow.
3
Carefully remove the misfed paper.
Lower the fusing unit release levers to
allow easier removal.
Lower the fusing unit release levers to
allow easier removal.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
4
Lift the fusing unit release levers, to
return them to their operating
position.
return them to their operating
position.
5
Close the front cover and side cover.
The misfeed indicator
(
(
) will go out.
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
• Do not touch the drum cartridge (green
portion) when removing the misfed paper.
Doing so may damage the drum and cause
smudges on copies.
Doing so may damage the drum and cause
smudges on copies.
• Be careful about unfixed toner on the
misfed paper soiling your hands or clothes.
Roller rotating knob
Fusing unit
release lever
release lever
Warning
Caution
• When closing the front cover, gently hold
both ends.
• When closing the side cover, press on the
handle.
• If the misfeed indicator (
) does not stop
blinking, check for torn pieces of paper in
the machine.
the machine.
Note
AL-1633_1644_EX.book 57 ページ 2003年10月23日 木曜日 午後8時21分
58
TROUBLESHOOTING
C. Misfeed in the transport area
1
Open the fusing paper guide by
pressing down the projection on
either side of the guide and remove
the misfed paper.
pressing down the projection on
either side of the guide and remove
the misfed paper.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
2
If the misfed paper cannot be removed
by the previous step but is visible in
the paper output area, remove the
paper by pulling it into the paper
output area.
by the previous step but is visible in
the paper output area, remove the
paper by pulling it into the paper
output area.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
3
Close the side cover.
The misfeed indicator
(
(
) will go out.
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
• When closing the side cover, press on the
handle.
• If the paper was torn, make sure that no
torn pieces remain in the machine.
• If the misfeed indicator (
) does not stop
blinking, check for torn pieces of paper in
the machine.
the machine.
Warning
Note
AL-1633_1644_EX.book 58 ページ 2003年10月23日 木曜日 午後8時21分
Click on the first or last page to see other AL-1644 (serv.man17) service manuals if exist.