Sharp AL-1566 (serv.man40) User Manual / Operation Manual ▷ View online
TROUBLESHOOTING AND MAINTENANCE
84
(C) If the original does not move easily into the exit area, remove it in the
direction of the arrow while rotating the roller.
"RETURN X ORIGINAL(S) START TO RESUME" will appear in the
display. Return the indicated number of pages to the document feeder
tray.
display. Return the indicated number of pages to the document feeder
tray.
Open and close the RSPF to clear the error indicator, and then
return the required number of originals. Press the [START] key (
) to
resume copying.
Note
85
8
TD CARTRIDGE REPLACEMENT
When toner is low, the error indicator will light up and "TONER IS LOW" will appear
in the display. For information on purchasing a new TD cartridge, see "ABOUT
SUPPLIES AND OPTIONS" (p.91). If copying is continued while the indicator is lit,
copies will gradually become lighter until the toner runs out. When the toner runs
out, the machine will stop operating, the error indicator will blink, and "REPLACE
THE TD CARTRIDGE" will appear in the display. Follow the procedure below to
replace the TD cartridge.
in the display. For information on purchasing a new TD cartridge, see "ABOUT
SUPPLIES AND OPTIONS" (p.91). If copying is continued while the indicator is lit,
copies will gradually become lighter until the toner runs out. When the toner runs
out, the machine will stop operating, the error indicator will blink, and "REPLACE
THE TD CARTRIDGE" will appear in the display. Follow the procedure below to
replace the TD cartridge.
1
Open the bypass tray, side cover, and front cover, in that order.
To open the bypass tray, see "Loading paper in the bypass tray" (p.22). To
open the side cover and front cover, see "INSTALLING THE TD
CARTRIDGE" (p.14).
open the side cover and front cover, see "INSTALLING THE TD
CARTRIDGE" (p.14).
2
Gently pull the TD cartridge out
while pressing the lock release
button.
while pressing the lock release
button.
3
Install a new TD cartridge. To install the new cartridge, see
"INSTALLING THE TD CARTRIDGE" (p.14).
"INSTALLING THE TD CARTRIDGE" (p.14).
4
Close the front cover and then the side cover by pressing the
round projections near the side cover open button. The error
indicator will go out and the ready indicator will light up.
round projections near the side cover open button. The error
indicator will go out and the ready indicator will light up.
• After the machine stops, it may be possible to make a few more
copies by taking the TD cartridge out of the machine, shaking it
horizontally, then reinstalling it. If copying is not possible after this
operation, replace the TD cartridge.
horizontally, then reinstalling it. If copying is not possible after this
operation, replace the TD cartridge.
• During a long copy run of a dark original, "TONER
REPLENISHMENT IN PROGRESS" appears in the display, and the
machine may stop even though toner is left. The machine will feed
toner up to 2 minutes and then the ready indicator will light up. Press
the [START] key (
machine may stop even though toner is left. The machine will feed
toner up to 2 minutes and then the ready indicator will light up. Press
the [START] key (
) to resume copying.
In order to help preserve the global environment, we recycle used TD
cartridges. Please read "COPIER TONER CARTRIDGE RECYCLING
PROGRAM", which is enclosed in the new TD cartridge package.
cartridges. Please read "COPIER TONER CARTRIDGE RECYCLING
PROGRAM", which is enclosed in the new TD cartridge package.
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
Note
Lock release button
Note
Caution
86
DRUM CARTRIDGE REPLACEMENT
The useful life of the drum cartridge is approximately 18,000 copies. When the
internal counter reaches approximately 17,000 copies, the error indicator will light up
and "A DRUM CARTRIDGE WILL BE NEEDED SOON" will appear in the display.
For more information on purchasing a drum cartridge, see "ABOUT SUPPLIES AND
OPTIONS" (p.91). When the error indicator blinks and "REPLACE THE DRUM
CARTRIDGE" appears in the display, the machine will stop operating until the
cartridge is replaced. Replace the drum cartridge at this time.
internal counter reaches approximately 17,000 copies, the error indicator will light up
and "A DRUM CARTRIDGE WILL BE NEEDED SOON" will appear in the display.
For more information on purchasing a drum cartridge, see "ABOUT SUPPLIES AND
OPTIONS" (p.91). When the error indicator blinks and "REPLACE THE DRUM
CARTRIDGE" appears in the display, the machine will stop operating until the
cartridge is replaced. Replace the drum cartridge at this time.
1
Remove the TD cartridge (see "TD CARTRIDGE
REPLACEMENT" (p.85)).
REPLACEMENT" (p.85)).
2
Hold the drum cartridge handle and
gently pull the cartridge out. Dispose
of the old drum cartridge in
accordance with local regulations.
gently pull the cartridge out. Dispose
of the old drum cartridge in
accordance with local regulations.
3
Remove the new drum cartridge from the protective bag and
remove the protective cover from the cartridge. Gently install
the new drum cartridge.
remove the protective cover from the cartridge. Gently install
the new drum cartridge.
4
Gently install the TD cartridge. To install the TD cartridge, see
"INSTALLING THE TD CARTRIDGE" (p.14).
"INSTALLING THE TD CARTRIDGE" (p.14).
Do not remove the protective cover on the drum portion (black paper) of
a new drum cartridge before use. The cover protects the drum against
external light.
a new drum cartridge before use. The cover protects the drum against
external light.
Do not touch the surface of the drum (green portion).
Doing so may cause smudges on the copies.
Doing so may cause smudges on the copies.
Caution
Drum cartridge handle
Caution
TROUBLESHOOTING AND MAINTENANCE
87
8
5
Close the front cover and then the side cover by pressing the
round projections near the side cover open button. The drum
replacement required error indicator will go out and the ready
indicator will light up.
round projections near the side cover open button. The drum
replacement required error indicator will go out and the ready
indicator will light up.
CHECKING THE TOTAL COUNT AND DRUM
CARTRIDGE LIFE
CARTRIDGE LIFE
You can check the total number of pages output by the machine (all pages printed by
the copy function and printer function), as well as the output counts of each function
(number of copies, number of scanned pages, number of faxes, etc.) and drum
cartridge life. When a count reaches 999,999 it returns to 0.
the copy function and printer function), as well as the output counts of each function
(number of copies, number of scanned pages, number of faxes, etc.) and drum
cartridge life. When a count reaches 999,999 it returns to 0.
1
Press the [MENU] key.
Press the [
Press the [
] key (
) or [
] key (
)
until "TOTAL COUNT" appears, and then
press the [OK] key.
press the [OK] key.
2
Press the [
] key (
) or [
] key (
) to
display the count of each function.
The count of each function changes as follows each the [
] key (
) or
[
] key (
)is pressed:
• "TOTAL OUTPUT":
Total number of ages output by the machine
• "COPIES":
Total number of copies
• "SPF/RSPF":
Total number of pages scanned using the
RSPF
RSPF
• "2-SIDED PRINT":
Total number of pages printed by two-sided
print
• "PRINTS":
Total number of pages printed the printer
function
function
• "FAX":
Total number of sent and received faxes
• "FAX SEND":
Total number of sent faxes
• "SCAN SEND":
Total number of scans
• "REMAINING DRUM LIFE": The remaining number of pages that can be
printed with the drum cartridge is displayed.
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
Caution
MAIN MENU
3:TOTAL COUNT
3:TOTAL COUNT
1,2,3,
1,2,3,
SP. FUNC
TOTAL OUTPUT
012,345
012,345
1,2,3,
1,2,3,
SP. FUNC
Click on the first or last page to see other AL-1566 (serv.man40) service manuals if exist.