DOWNLOAD Sharp PN-L802B (serv.man12) Service Manual ↓ Size: 6.57 MB | Pages: 58 in PDF or view online for FREE

9

E

For information on the touch panel driver, see the Touch Panel Driver Operation Manual. For information on the Pen Software,

see the Pen Software Operation Manual.

If any component should be missing, please contact your dealer.


 Liquid Crystal Display Monitor: 1



 Remote control unit: 1



 Cable clamp: 3



 Power cord: 1



 R-6 battery (“AA” size): 2



 CD-ROM (Utility Disk for Windows): 1



 Setup Manual: 1



 Touch pen: 1

*  Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.

*  For environmental protection!

 Do not dispose of batteries in household waste. Follow the disposal instructions for your area.



 Pen tip (for touch pen): 2



 Touch pen battery 

(LR-03 (“AAA” size)): 1



 USB cable: 1



 Eraser: 1



 Tray: 1



 Tray mounting fitting  

(cover / bracket): x 2

To use the touch panel, the touch panel must be connected to a computer, and the touch panel driver and Pen Software must be 

installed on the computer from the supplied CD-ROM. System requirements for each software program are as follows.

Computer

PC/AT compatible computer with a USB 1.1 port (must be able to supply a 500 mA (5.0 V) current)

and able to output a resolution of 1920 x 1080. (CD-ROM drive required for software installation.)

OS

Windows XP (32-bit or 64-bit version), Windows Vista (32-bit or 64-bit version), Windows 7 (32-bit

or 64-bit version)

CPU

Intel Celeron or AMD Sempron 1.6 GHz or faster

Intel Core 2 Duo or AMD Athlon II X2 2.8 GHz or faster recommended

Memory

At least 2 GB (at least 1 GB for Windows XP)

Free space on hard drive At least 100 MB (free space separately required for data storage)

To connect the touch panel and install the touch panel driver, see the Touch Panel Driver Operation Manual.

To install the Pen Software, see the Pen Software Operation Manual.

Connection with a PC or AV equipment .....................12
Connection when the PN-ZB01 (optional)  
is attached ..................................................................13

Installing the batteries ................................................15
Remote control operation range .................................15

Turning on the main power.........................................16
Turning power on/off ..................................................16
Disabling power on/off operations ..............................17

Inserting the battery ...................................................18
Touch action and touch mode ....................................18

Touch action ...............................................................18
Other functions ...........................................................20
Cautionary points .......................................................20
Eraser .........................................................................20

Displaying the menu screen .......................................23
Menu item details .......................................................24
Adjustments for PC screen display ............................30

PC connection ............................................................32
Communication conditions .........................................32
Communication procedure .........................................32
Setting of the GAMMA user data ................................35
RS-232C command table ...........................................36

Settings to connect to a LAN ......................................43
Controlling with a PC ..................................................45



 Tray mounting screws: M5 x 4 / M4 x 2



  Terminal label: 1 

Used when installing the expansion board 

PN-ZB01 (optional).



  Cover Sharp logo: 1 

Place this sticker onto the SHARP logo to 

cover the logo.

10

E

n

  3.  Power button (See page 16.)

  6.  Remote control sensor (See page 15.)

  7.  Input switch (See page 21.)

  8.  Power LED (See page 16.)

n

This section is used to connect optional 

hardware for function expansion. 

Offering this attachment location is 

not a guarantee that future compatible 

hardware attachments will be released.

  3.  Handles (See page 14.)

Additional input/output terminals are 

available by attaching the PN-ZB01

expansion board (optional).

  6.  PC/AV HDMI input terminal (See page

12.)

  7.  PC D-sub input terminal (See page

12.)

  8.  Audio input terminal (See page 12.)

  9.  Audio output terminals (See page 12.)

 10.  RS-232C output terminal (See page

12.)

 11.  RS-232C input terminal (See page 12.)

This terminal is provided for possible 

future (optional) function expansion.

Offering of this terminal is not a 

guarantee that future expanded 

functionality will be provided.

 14.  AC input terminal (See page 14.)

 15.  Main power switch (See page 16.)

Caution

•  Consult your SHARP dealer for attachment/detachment of

optional parts.

•  Do not open the expansion terminal cover by yourself. 

There are high voltage parts inside the cover which may 

cause an electric shock.

 16.  PC/AV DVI-D input terminal (See page 13.)

 17.  PC/AV DVI-D output terminal (See page 13.)

 18.  LAN terminal (See page 13.)

 19.  External speaker terminals (See page 13.)

 20.  Audio 1 input terminals (See page 13.)

 21.  Audio 2 input terminals (See page 13.)

 22.  PC RGB input terminals (See page 13.)

 23.  AV component input terminals (See page 13.)

 24.  AV video input terminal (See page 13.)

 25.  AV S-video input terminal (See page 13.)

11

E

n

 

 

2.  POWER button (See page 16.)

 

3.  MUTE button (See page 21.)

 

4.  VOL +/- buttons (See page 21.)

   

BRIGHT +/- buttons (See page 21.)

   

 

5.  DISPLAY button (See page 21.)

 

6.  MODE button (See page 21.)

 

7.  INPUT button (See page 21.)

 

8.  MENU button (See page 21.)

 

9.  SIZE button (See page 21.)

12

E

Caution

•  Be sure to turn off the main power switch and disconnect

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the 

equipment to be connected.

•  Be careful not to confuse the input terminal with the output

terminal when connecting cables. Accidentally reversing 

cables connected to the input and output terminals may 

cause malfunctions and the other problems.

TIPS

•  When using the touch panel, connect the USB cable to

the computer. For details, see the Touch Panel Driver

Operation Manual.

•  Images may not be displayed properly depending on the

computer (video card) to be connected.

•  A screen with 1920 x 1080 resolution may not be displayed

correctly on PC RGB. In this case, check the settings of

your computer (video card) to verify that input signals

conform to specifications of this monitor. (See page 55.)

•  If there is a check box to disable EDID in display control

panel, check it when using PC RGB.

•  Use the automatic screen adjustment when a PC screen

is displayed for the first time using PC D-SUB or PC RGB,

or when the setting of the PC is changed. The screen is

adjusted automatically when SELF ADJUST in the OPTION

menu is set to ON.

•  If the audio output from the playback device is connected

directly to speakers or other devices, the video on the 

monitor may appear delayed from the audio portion. 

Audio should be played through this monitor by connecting 

the playback device to the monitor’s audio input, and 

connecting the monitor’s audio output to the speakers or 

other devices.

•  The audio input terminals used in each input mode are

factory-set as follows.

PC D-SUB, PC DVI-D, PC RGB Audio input terminal
AV DVI-D

Audio1 input terminal

AV COMPONENT (BNC),

AV S-VIDEO , AV VIDEO (BNC) Audio2 input terminal
AV COMPONENT (D-SUB),

AV VIDEO (D-SUB)

Audio input terminal

PC HDMI, AV HDMI

PC/AV HDMI input terminal

  1.  PC/AV HDMI input terminal

•  Use a commercially available HDMI cable (conforming to

the HDMI standard).

•  Set HDMI of INPUT SELECT on the OPTION menu

according to the device to be connected.

•  Select the audio input terminal to be used in PC HDMI

or AV HDMI of AUDIO SELECT on the OPTION menu.

When HDMI is selected, connection to the audio input

terminal is unnecessary.

•  Set D-SUB of INPUT SELECT on the OPTION menu

according to the device to be connected.

•  Common terminal for AV COMPONENT and AV VIDEO.

•  When the PN-ZB01 (optional) is attached, select the audio

input terminal to be used in PC D-SUB of AUDIO SELECT

on the OPTION menu.

•  To use with AV VIDEO (D-SUB), connect the green

terminal to the device’s video output.

•  Use an audio cable without resistance.

•  When the PN-ZB01 (optional) is attached, set the audio

input terminal used for each input mode in AUDIO

SELECT on the OPTION menu.

•  The output sound varies depending on the input mode.

•  The volume of the output sound can be fixed by setting

AUDIO OUTPUT (RCA) on the OPTION menu.

•  It is not possible to control the sound output from the

audio output terminals with the AUDIO menu.

•  You can control the monitor from a PC by connecting a

commercially available RS-232 straight cable between

these terminals and the PC.

•  To use the touch panel, connect the touch panel to your

computer with the provided USB cable. (Touch Panel

Driver Operation Manual.)