Sharp PN-655RE (serv.man5) User Manual / Operation Manual ▷ View online
7
E
ENGLISH
Supplied Accessories
Make sure the following accessories are provided with the product.
If any component should be missing, please contact your dealer.
If any component should be missing, please contact your dealer.
P OWER
INPUT
MENU
MUTE
DISLAY
SIZE
MODE
LC-450F
RRMCG1004MPPZ
BRIGHT
BRIGHT
R-6 battery (2)
Liquid Crystal Display (1)
● Power cord (1)
Remote control unit (1)
Stand hole
protection cover (2)
protection cover (2)
● CD-ROM (1)
(Utility Disk for Windows)
● Operation manual (1)
• Sharp Corporation holds authorship rights to the Utility Disk programme. Do not reproduce it without permission.
• For environmental protection!
• For environmental protection!
Do not dispose of batteries in household garbage. Follow the disposal instructions for your area.
8
E
Main power switch (See page 19.)
AC input terminal (See page 14.)
Vents
Hooks
This terminal is not available.
External speaker
terminals
(See page 13.)
terminals
(See page 13.)
Composite video input terminal
(See page 12.)
Audio output terminals (See page 13.)
Audio input terminals (See page 12.)
PC audio input terminal (See page 11.)
RS-232C output terminal (See page 34.)
Component video
input terminals
(See page 12.)
input terminals
(See page 12.)
RS-232C input terminal (See pages 33 and 34.)
PC analogue RGB input terminal (See page 11.)
PC digital RGB (DVI-D) input terminal
(See page 11.)
(See page 11.)
PC digital RGB (DVI-D) output terminal
(See page 15.)
(See page 15.)
Rear view
Part Names
Front view
INPUT
Handles
(See page 17.)
(See page 17.)
LCD panel
Input switch
(see page 20.)
(see page 20.)
Power LED
(see page 19.)
(see page 19.)
Remote control sensor
(See page 18.)
(See page 18.)
Temporary stand
(See page 16.)
(See page 16.)
Power switch
(see page 19.)
(see page 19.)
TIPS
• Use a pointed object such as a pen tip to press the switches at the front of the monitor.
• The shape of the stand may change without prior notice.
• The shape of the stand may change without prior notice.
9
E
ENGLISH
POWER button
(See page 19.)
(See page 19.)
MUTE button
(See page 20.)
(See page 20.)
DISPLAY button
(See page 21.)
(See page 21.)
MODE button
(See page 21.)
(See page 21.)
VOL +/- buttons
(See page 20.)
(See page 20.)
BRIGHT +/- buttons
(See page 20.)
(See page 20.)
INPUT button
(See page 20.)
(See page 20.)
Signal transmitter
MENU button
(See page 23.)
(See page 23.)
SIZE button
(See page 20.)
(See page 20.)
Cursor control
( / / / ) buttons (See page 23.)
( / / / ) buttons (See page 23.)
Part Names
10
E
How to install the monitor
Mounting precautions
• Since the monitor is heavy, consult your dealer before installation.
• Installing or moving the monitor must be done by three or more people.
• Do not hold the LCD panel when moving the monitor. This may cause product damage, failure, or injury.
• Install the monitor with the surface perpendicular to a level surface. If necessary, limit the tilt between
• Installing or moving the monitor must be done by three or more people.
• Do not hold the LCD panel when moving the monitor. This may cause product damage, failure, or injury.
• Install the monitor with the surface perpendicular to a level surface. If necessary, limit the tilt between
0 and 20 degrees downward.
• Mounting the monitor on the wall requires special expertise and the work must be performed by an
authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company
will bear no responsibility for accidents or injuries caused by improper mounting or mishandling.
will bear no responsibility for accidents or injuries caused by improper mounting or mishandling.
• This monitor should be used at an ambient temperature between 0°C and 40°C. Provide enough space
around the monitor to prevent heat from accumulating inside.
5
5
The Power LED must be on the lower side.
Unit: cm
5
4.5
30
If it is diffi cult to provide such space because the monitor is installed inside a housing or for other
reasons, take other measures to keep the ambient temperature between 0°C and 40°C such as
installing a fan in the housing.
installing a fan in the housing.
• This monitor must be installed in a vertical orientation only. It cannot be installed in a horizontal
orientation.
• Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a
malfunction.
• After mounting, it is recommended to take some measures to prevent the monitor from falling down.
Secure the monitor by fastening the hooks at the top of the monitor to a wall or a pillar with strong cord
Secure the monitor by fastening the hooks at the top of the monitor to a wall or a pillar with strong cord
and brackets (not included).
• Do not place the monitor on a device which generates heat.
• Be sure to use a stand or a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary
• Be sure to use a stand or a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary
for some materials such as plaster / thin plastic board / wood before starting installation. This monitor
and bracket must be installed on a wall which can endure at least 4 times or more the weight of the
monitor. Install by the most suitable method for the material and the structure.
and bracket must be installed on a wall which can endure at least 4 times or more the weight of the
monitor. Install by the most suitable method for the material and the structure.
• This monitor is fi xed to the temporary stand when shipped from the factory. Please note that this stand
is for temporary use only until the monitor is properly mounted.
Click on the first or last page to see other PN-655RE (serv.man5) service manuals if exist.