DOWNLOAD Sharp PN-60TB3 (serv.man6) Service Manual ↓ Size: 4.72 MB | Pages: 56 in PDF or view online for FREE

The wires in this mains lead are coloured in accordance with the following code:

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the 
terminals in your plug proceed as follows:

• The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the 

letter 

E or by the safety earth   or coloured green or green-and-yellow.

• The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 

N or coloured black.

• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 

L or coloured red.

Ensure that your equipment is connected correctly. If you are in any doubt consult a qualified electrician.

ENGLISH

1

E

WARNING:  TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT 

TO RAIN OR MOISTURE.

RISK OF ELECTRIC 

SHOCK

DO NOT OPEN

CAUTION:   TO REDUCE THE RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE COVER. 

NO USER-SERVICEABLE PARTS 

INSIDE. 

REFER SERVICING TO QUALIFIED 

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within 

a triangle, is intended to alert the user to the 

presence of uninsulated “dangerous voltage” 

within the product’s enclosure that may be of 

sufficient magnitude to constitute a risk of electric 

shock to persons.

The exclamation point within a triangle is 

intended to alert the user to the presence of 

important operating and maintenance (servicing) 

instructions in the literature accompanying the 

product.

Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your 

product, please read the Safety Precautions carefully before using this product.

For information on Touch Pen Utility, Touch Panel Settings Tool, Pen Software and Touch Display Link, see the manual for 

each.

2

E

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly 

handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can 

result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, 

operating and cleaning the product. To ensure your safety and prolong the service life of your LCD product, please read the 

following precautions carefully before using the product.

  1.  Read instructions — All operating instructions must be read and understood before the product is operated.
  2.   Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future 

reference.

  3.  Observe warnings — All warnings on the product and in the instructions must be observed closely.

  4.  Follow instructions — All operating instructions must be followed.

  5.   Cleaning — Unplug the power cord from the AC outlet before cleaning the product. Use a dry cloth to clean the product. Do 

not use liquid cleaners or aerosol cleaners.

  6.   Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result 

in accidents.

  7.   Water and moisture — Do not use the product near water. Do not install the product in a place where water may splash onto 

it. Be careful of equipment which drains water such as an air-conditioner.

  8.  Ventilation — The vents and other openings in the cabinet are designed for ventilation.

     Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life 

of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings. 

Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the 

manufacturer’s instructions are followed.

  9.   Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from 

resting on them.

 10.   The screen used in this product is made of glass. Therefore, it can break when the product is dropped or applied with 

impact. Be careful not to be injured by broken glass pieces in case the screen breaks.

 11.  Overloading — Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.

 12.   Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage flows in 

the product, and inserting an object can cause electric shock and/or short internal parts.

    For the same reason, do not spill water or liquid on the product.

 13.   Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other 

dangerous conditions. Request a qualified service person to perform servicing.

 14.   Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service 

person to perform repairs. 

a.  When the power cord or plug is damaged. 

b.  When a liquid was spilled on the product or when objects have fallen into the product. 

c.  When the product has been exposed to rain or water. 

d.  When the product does not operate properly as described in the operating instructions. 

   Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls 

not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified 

technician.

    e.  When the product has been dropped or damaged. 

    f.   When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product 

needs servicing.

15.   Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement 

parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of 

unauthorized parts can result in fire, electric shock and/or other danger.

 16.   Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to 

ensure that the product is in proper operating condition.

 17.   Wall mounting — When mounting the product on a wall, be sure to install the product according to the method 

recommended by the manufacturer.

 18.   Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating 

products (including amplifiers).

 19.   Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, 

dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below:

    • Use the specified batteries only.

    •  Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the 

compartment.

    • Do not mix old and new batteries.

    • Do not mix batteries of different types. Voltage specifications of batteries of the same shape may vary.

    • Replace an exhausted battery with a new one promptly.

    • If you will not use the remote control for a long time, remove the batteries.

    •  If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your 

eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your 

clothing may cause a skin irritation or damage your eye.

ENGLISH

3

E

 20.   Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, 

severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and 

missile launch control in a weapon system.

 21.   Do not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result in  

low-temperature burns.

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may 

be required to take adequate measures.

To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: HDMI input terminal, 

D-SUB input terminal, and DisplayPort input/output terminals.

If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, 

particularly to children, can be avoided by taking simple precautions such as:

• Using fixing devices like wall mount brackets recommended by the manufacturer.

• Only using furniture that can safely support the monitor.

• Ensuring the monitor is not overhanging the edge of the supporting furniture.

•  Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the 

monitor to a suitable support.

• Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the monitor or its controls. 

- Don’t allow children to climb on or play with the monitor.

- Don’t place the monitor on furniture that can easily be used as steps, such as a chest of drawers.

-  Remember that children can become excited while watching a program, especially on a “larger than life” monitor. Care 

should be taken to place or install the monitor where it cannot be pushed, pulled over, or knocked down.

-  Care should be taken to route all cords and cables connected to the monitor so that they cannot be pulled or grabbed by 

curious children.

-  Do not use the monitor where there is a lot of dust, where 

humidity is high, or where the monitor may come into contact 

with oil or steam. Do not use in an environment where 

there are corrosive gases (sulfur dioxide, hydrogen sulfide, 

nitrogen dioxide, chlorine, ammonia, ozone, etc.). As this 

could lead to fire.

-  Ensure that the monitor does not come into contact with 

water or other fluids. Ensure that no objects such as paper 

clips or pins enter the monitor as this could lead to fire or 

electric shock.

-  Do not place the monitor on top of unstable objects or in 

unsafe places. Do not allow the monitor to receive strong 

shocks or to strongly vibrate. Causing the monitor to fall or 

topple over may damage it.

-  Do not use the monitor near heating equipment or in places 

where there is likelihood of high temperature, as this may 

lead to generation of excessive heat and outbreak of fire.

-  Do not use the monitor in places where it may be exposed to 

direct sunlight.

-  The AC outlet shall be installed near the equipment and shall 

be easily accessible.

-  Do not operate the screen with a hard or pointed object such 

as a fingernail or pencil.

- Use only the power cord supplied with the monitor.
-  Do not damage the power cord nor place heavy objects on 

it, stretch it or over bend it. Also, do not add extension cords. 

Damage to the cord may result in fire or electric shock.

-  Do not use the power cord with a power tap. 

Adding an extension cord may lead to fire as a result of 

overheating.

-  Do not remove or insert the power plug with wet hands. 

Doing so could result in electric shock.

- Unplug the power cord if it is not used for a long time.
-  Do not attempt to repair the power cord if it is broken 

or malfunctioning. Refer the servicing to the service 

representative.