DOWNLOAD Sharp LL-T15S1 (serv.man11) Service Manual ↓ Size: 1.41 MB | Pages: 113 in PDF or view online for FREE

1. Turn on the computer.
2. Press the monitor's power button.

The power LED will be lit green, and the screen will
display an image.

When setting up this monitor for the first time or after
having changed an aspect of the current system,
perform an automatic screen adjustment before use
(p. 15).

1. Turn the computer off.
2. Press the monitor's power button.

The Power LED will disappear.

Depending on the computer or OS, it may be necessary
to use the computer to operate the installation of monitor
set-up information etc. If so, follow the steps below to
install the monitor set-up information. (Depending on the
type of computer or OS, command names and methods
may differ. Please follow the computer’s own operation
manual while reading this.)

For Windows95
Installing monitor set-up information into Windows95.
This explanation assumes that the floppy disk drive is "A
drive".

1. Place the Utility Disk (provided) into the computer's A

drive.

2. Click on the [Start] button. From [Settings], choose

[Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced Properties], and

[Monitor], then [Change].

5. Click on [Have disk], confirm that [Copy manufactur-

er's files from:] is [A:] then click [OK].

6. Confirm that the monitor details are selected, and

click [OK].

7. Check that the monitor details are displayed, then

click [Apply].

8. Click [OK], and close the window.

9. Remove the Utility Disk from the A drive.

For Windows98
Installing monitor set-up information into Windows98.
This explanation assumes that the floppy disk drive is "A
drive".

If the "Add new Hardware Wizard" has appeared:

1. Place the Utility Disk (provided) into the computer's A

drive.

2. Click [Next].

3. Check [Display a list of all the drivers in a specific

location, so you can select the driver you want.], then
click [Next].

4. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is [A:],
and click [OK].

5. Confirm that the monitor details are selected, then

click [Next], [Next], and [Finish]. If the "Add New
Hardware Wizard" appears, repeat the installation
commands beginning from 2 above.

6. Remove the Utility Disk from the A drive.

If the "Add New Hardware Wizard" has not appeared:

1. Place the Utility Disk in the computer's A drive.

2. Click on the [Start] button. From [Settings], choose

[Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced] and [Monitor].

5. In [Options], check [Automatically detect Plug & Play

monitors] and click on [Change].

6. Click [Next].

7. Click on [Display a list of all the drivers in a specific

location, so you can select the driver you want.], then
click [Next].

8. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is [A:],
and click [OK].

9. Confirm that the monitor details are selected, then

click [Next], [Next], and [Finish].

10. Check that the monitor details are displayed, then

click [Apply].

11. Click [OK], and close the window.

12. Remove the Utility Disk from the A drive.

Power LED

Power button

For Windows2000
Installing monitor set-up information into Windows2000.
This explanation assumes that the floppy disk drive is "A
drive".

1. Place the Utility Disk (provided) into the computer's A

drive.

2. Click on the [Start] button. From [Settings], choose

[Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced] and [Monitor].

5. Click on [Properties], [Driver] and [Update Driver].

6. When [Upgrade Device Driver Wizard] appears, click

[Next].

7. Check [Display a list of the known drivers for this

device so that I can choose a specific driver] and
click [Next].

8. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is [A:],
and click [OK].

9. Select the monitor from the list displayed and click

[Next].

10. Click [Next], confirm that the monitor's name appears

on the screen, and click [Finish]. If [The Digital
Signature Not Found] appears, click [Yes].

11. Click on [Close].

12. Click [OK], and close the window.

13. Remove the Utility Disk from the A drive.

For WindowsMe
Installing monitor set-up information into WindowsMe.
This explanation assumes that the floppy disk drive is "A
drive".

If the "Add new Hardware Wizard" has appeared:
1. Place the Utility Disk (provided) into the computer's A

drive.

2. Check [Specify the location of the driver [Advanced]]

and click [Next].

3. Check [Display a list of all the drivers in a specific

location, so you can select the driver you want.], then
click [Next].

4. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is [A:],
and click [OK].

5. Select the monitor details from the list, then click

[Next], [Next], and [Finish]. If the "Add new Hardware
Wizard" appears, repeat the installation commands
beginning from 2 above.

6. Remove the Utility Disk from the A drive.

If the "Add New Hardware Wizard" has not appeared:
1. Place the Utility Disk in the computer's A drive.
2. Click on the [Start] button. From [Settings], choose

[Control Panel].

3. Double click on [Display].
4. Click on [Settings], [Advanced] and [Monitor].
5. In [Options], check [Automatically detect Plug & Play

monitors] and click on [Change].

6. Check [Specify the location of the driver [Advanced]]

and click [Next].

7. Check [Display a list of all the drivers in a specific

location, so you can select the driver you want.] and
click [Next].

8. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is [A:],
and click [OK].

9. Select the monitor details, then click [Next], [Next],

and [Finish].

10. Check that the monitor details are displayed, then

click [Apply].

11. Click [OK], and close the window.
12. Remove the Utility Disk from the A drive.

Automatic screen adjustment (right column)
The clock, phase, H-POS (horizontal positioning) and V-
POS (vertical positioning) functions can be adjusted
automatically.
Adjustment of backlight (p.16)
Brightness of backlight can be adjusted.
Manual adjustment (p. 17)
Fine adjustments can be made using the On Screen
Display (OSD) Menu.

All adjustments will be saved even after turning the
power off.

All adjustment values can be returned to their original
ex-factory values in one command.
1. Press the power button to turn off the monitor power.
2. Press the MENU button and the SELECT button

simultaneously, and while doing this press the power
button (i.e. turn the power on). When [ALL RESET]
appears on the screen, the reset is complete.

While ALL RESET is displayed, the control buttons
do not function.

It is not possible to reset values when the adjustment
lock is in place. Remove the adjustment lock before
attempting to operate control buttons.

By disabling the control buttons (i.e. setting the lock) any
attempted changes to adjusted values will be voided.
1. Press the power button to turn off the monitor power.
2. While pressing the MENU button, press the power

button (i.e. turn the power on).
When the menu is unlocked:
[ADJUSTMENT LOCKED] will appear on the screen,
and the lock will be set.
When the menu is locked:
[ADJUSTMENT UNLOCKED] will appear on the
screen, and the lock will be removed.

When the lock setting is on, only the power button
and the speaker volume adjustment can be
operated.

Messages displayed on the screen and OSD Menu
contents can be changed to the following languages.
English, German, French, Italian, Spanish.
1. Turn off the monitor.

2. Pressing the SELECT and 

   

buttons simultaneously,

press the power button (i.e. turn the power on).
The Language Selection Menu (LANGUAGE) will be
displayed on the screen.

3. Use the SELECT button to choose a language.
4. Press the MENU button.

The setting is complete. From now, messages and
adjustment menus will be displayed in the chosen
language.

Options in MENU 1 (ADJUSTMENT) can be adjusted
automatically (CLOCK, PHASE, H-POS,
V-POS).

When setting up this monitor for the first time or after
having changed an aspect of the current system,
perform an automatic screen adjustment before use.

1. First display an image that makes the entire screen

very bright. If you are using Windows, you can use
the Adjustment Pattern on the accompanying Utility
Disk (p.16).

2. Press the MENU button.

The ADJUSTMENT Menu will be displayed.

[

]

A

A

A

A

A

C

C

D

E

H

V

H

H

J

K

L

M

M

N

N

L

O

O

O

P

P

S

S

S

T

T

T

U

U

U

8

V

1

2

4

 

6

4

H

6

7

0

8

0

5

6 0

 

1

 

0

0

5

z

0

x

-

O

P

S

-

:

k

: 4

H z

E

3. Press the 

 

button.

The screen will become dark and [ADJUSTING] will
be displayed. After a few seconds the ADJUSTMENT
Menu will return. (The automatic adjustment is now
complete.)

4. Press the MENU button 4 times to make the On

Screen Display (OSD) Menu disappear.

In most cases automatic adjustment is sufficient.

If necessary due to any of the following, manual
adjustments (p. 17) can be performed after the
automatic adjustment.

When further fine adjustment is needed.

When [OUT OF ADJUST] is displayed. (When the
screen displays an entirely dark image, the
automatic screen adjustment may be disabled.
When making an automatic adjustment, be sure
to either use the Adjustment Pattern or try
displaying an image that makes the entire
screen very bright.)

If you are using Windows, you can use the Adjustment
Pattern on the accompanying Utility Disk.
This explanation is for Windows 95/98/Me/2000, and
assumes that the floppy disk drive is "A drive".
1. Place the Utility Disk (provided) into the computer's A

drive.

2. Open [My Computer] and select [3 ½ Floppy (A:)]. If

using Windows 3.1, open [File Manager] and choose
"A drive".

3. Double click on [Adj_uty.exe] to run the Adjustment

Program. The Adjustment Pattern will appear.

After completing the adjustments, press the
computer's [Esc] key to exit the Adjustment Program.

If the floppy disk drive of your computer is not
"A drive", please read the below substituting the
floppy disk drive you are using in place of
"A drive" or "A".

If your computer's display mode is set to 65K colors,
you may see the different color levels in each color
pattern or the gray scale may look colored. (This is
due to the specification of the input signal and is not
a malfunction.)

The backlight brightness can be set to change automati-
cally for use in different surroundings. (Automatic
brightness adjustment)
If the surroundings become brighter, the backlight will
become brighter.
If the surroundings become darker, the backlight will
become darker.
The brightness sensor measures the brightness of the
surrounding environment. Never place anything in front
of the brightness sensor.

Use the BRIGHT button to switch between automatic
brightness adjustment or no automatic brightness
adjustment.

Automatic brightness adjustment

AUTO  BRIGHTNESS  ON

[

]

[

]

 

!"

 Press BRIGHT button

No automatic brightness adjustment

B R I G H T 

AUTO  BRIGHTNESS  OFF

]

[

[

]

3 1

The backlight adjustment bar automatically
disappears several seconds after the last command.

On the screen that appears after the values have
been set, the brightness can be further adjusted by

pressing the 

 

and 

 

buttons.

Adjusting the brightness
Carry out the commands without the On Screen Display
(OSD) Menu displayed. If the OSD Menu is displayed,
press the MENU button (several times may be required)
and begin when the OSD Menu has disappeared.

When adjusting brightness automatically
Using the adjusted backlight brightness as a base, the
brightness can be adjusted automatically.

1. Without the OSD Menu being displayed, press the 

button or the 

 

button. The BRIGHT bar will appear at

the bottom section of the screen.

AUTO  BRIGHTNESS  ON

[

]

[

]

2. Adjust by pressing the 

 

button (darker) or the 

button (lighter).
Depending on the brightness of the surrounding
environment, the parameters for adjustment may be
limited.

3. Press the MENU button.

The OSD will disappear.

Adjustment pattern