DOWNLOAD Sharp LL-T15S1 (serv.man11) Service Manual ↓ Size: 1.41 MB | Pages: 113 in PDF or view online for FREE

Model
LL-T15S1 (serv.man11)
Pages
113
Size
1.41 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Monitor
File
ll-t15s1-sm11.pdf
Date

Sharp LL-T15S1 (serv.man11) User Manual / Operation Manual ▷ View online

9
English
-
Under certain display conditions, minute specks or
spots may be noticeable. This is common for liquid
crystal monitors and is not a malfunction.
-
The LCD panel has been manufactured using highly
elaborate technology. Properly working pixels com-
prise 99.99% of total pixels. However, please
understand that 0.01% or less of pixels may be
missing or be brighter than usual.
-
Do not leave the screen displaying idly for long peri-
ods of time, as this could cause afterimage to remain.
-
If the brightness is adjusted to the minimum setting it
may be difficult to see the screen.
-
The quality of the computer signal may influence the
quality of the display. We recommend using a
computer able to emit high quality video signals.
-
Never rub or tap the monitor with hard objects.
-
Please understand that Sharp Corporation bears no
responsibility for errors made during use by the
customer or a third party, nor for any other malfunc-
tions or damage to this product arising during use,
except where indemnity liability is recognized under
law.
-
This monitor and its accessories may be upgraded
without advance notice.
Location
-
Do not use the monitor where ventilation is poor,
where there is a lot of dust, where humidity is high, or
where the monitor may come into contact with oil or
steam, as this could lead to fire.
-
Ensure that the monitor does not come into contact
with water or other fluids. Ensure that no objects such
as paper clips or pins enter the monitor as this could
lead to fire or electric shock.
-
Do not place the monitor on top of unstable objects
or in unsafe places. Do not allow the monitor to come
into contact with strong shocks or vibrations. Causing
the monitor to fall or topple over may damage it.
-
Do not use in places where the monitor will be
subject to direct sunlight, near heating equipment or
anywhere else where there is likelihood of high
temperature, as this may lead to generation of
excessive heat and outbreak of fire.
The Power Cord
-
Do not damage the power cord or place heavy
objects on it, stretch it or overly bend it. Also, do not
add extension cords. Damage to the cord may result
in fire or electric shock.
-
Use only the AC adapter supplied with the monitor.
Using an AC adapter other than that supplied may
lead to fire.
-
Insert the power plug directly into the AC outlet.
Adding an extension cord may lead to fire as a result
of overheating.
Monitor and accessory checklist
-
Please check that the following items are included in
the package.
-
LCD monitor (1)
-
AC adapter (1)
-
Audio cable (2)
-
Utility Disk for Windows (1)
-
Operation manual (1)
Notes:
-
You are advised to retain the carton in case the
monitor needs to be transported.
-
Authorship rights to the Monitor Settings Adjustment
Disk program are held by Sharp Corporation. Do not
reproduce it without permission.
Use of AC adapter
-
Do not use the AC adapter for other than the
specified equipment.
-
Unplug the AC adapter if it is not used for long time.
-
Do not place any objects on the AC adapter.
-
Do not use the AC adapter outdoors.
-
Do not attempt to repair the AC adapter if it is broken
or malfunctioning. Refer the servicing to the service
representative.
-
Do not try to open the AC adapter.
-
Do not use water or wet cloth to cleaning of the AC
adapter.
Manual Scope
-
In this booklet, Microsoft Windows 2000 will be
referred to as [Windows2000], Microsoft Windows
Millenium as [WindowsMe], Microsoft Windows 98 as
[Windows98], Microsoft Windows 95 as [Windows95],
and Microsoft Windows Version 3.1 as [Windows3.1].
When there is no need to distinguish between
programs, the term [Windows] will be used.
-
Microsoft and Windows are registered trademarks of
Microsoft Corp. U.S. in the U.S. and the other
countries.
-
Macintosh is a registered trademarks of Apple
Computer, INC.
Tips and safety precautions
10
Product description
1
7
8
9
10
11 12 13
14
15
2
3
4 5 6
1.
MENU button .......................... This button is used to pop-up, select and close the OSD Menu.
2.
SELECT button ....................... When the On Screen Display (OSD) menu is displayed, choose the menu option to
be adjusted.
3.
   
buttons ............................ When the OSD menu is displayed:
Change or adjust the adjustment values by switching between the OSD options
contents.
When the backlight adjustment bar is displayed:
The brightness of the backlight can be adjusted.
When the OSD menu / backlight adjustment bar is not displayed:
The speaker volume can be adjusted.
4.
BRIGHT button ....................... When the OSD menu is displayed:
The OSD menu disappears.
When the OSD menu is not displayed:
Switch between turning the automatic brightness adjustment function [ON] and
[OFF].
5.
Power LED .............................. This LED is lit green when in use and orange when in power-saving mode.
6.
Power  button ........................... Pressing this button turns the power on. (After turning the power on, it may take a
little time before the screen displays.)
Press the button again to turn the power off.
7.
Speakers ................................ Audio entering via the monitor and the external device connected to the monitor
can be heard.
8.
Brightness sensor .................. Measures the brightness of the surrounding environment.
9.
Microphone terminal .............. A microphone (to be purchased separately) can be connected here.
10. Headphone terminal .............. Headphones (to be purchased separately) can be connected here.
11. Audio input terminal ............... A computer’s audio output terminal can be connected here. (The audio cable
included should be used.)
12. Microphone output terminal ... A computer’s microphone terminal can be connected here. (The audio cable
included should be used.)
13. Power terminal ........................ Connect the AC adapter (included) here.
14. RGB signal cable ................... Connects to the computer's analog RGB output terminal.
15. Ventilation openings .............. Note: Never block the ventilation openings as this may lead to overheating inside
the monitor and result in malfunction.
Front view
Rear view
Left side surface
11
English
Product description
Standing up and adjusting the monitor
Standing up the monitor
Press down on the stand and lift up the top section of the
monitor.
Adjusting the monitor
Lightly holding both sides of the monitor, adjust it to a
suitable viewing angle.
25
3
Folding up the monitor (when packing it away)
-
Except when folding away the monitor to transport it,
do not fold down the monitor. Unnecessarily folding
and unfolding the monitor could lead to malfunction.
1. Remove the AC adapter.
2. If carrying out adjustments to the monitor, place it
upright.
3. While pressing the rear lock disable button (1),
gently fold back the monitor (2).
(2)
(1)
12
Connecting the monitor and turning
the monitor on and off
Connecting the monitor to a computer
(PC etc.)
When connecting, ensure that both the monitor and
computer are switched off.
Note:
-
Do not overly bend the cable or add extension cords
as this could lead to malfunction.
Using the audio cable included, the computer’s audio
output terminal or a microphone terminal can be con-
nected.
 
 
Note:
-
DO only connect cables less than 3m to the LL-
T15S1.
RGB cable
If connecting to a D-sub 15 pin 2 row Apple
Power Macintosh, attach a Macintosh
conversion adapter (to be purchased
separately) to the RGB signal cable.
Macintosh conversion adapter
RGB signal cable
After connecting the adapter, tighten the
screws on each side to fix into place.
Firmly insert the analog RGB output
terminal (mini D-sub 15 pin with 3 rows)
then tighten the screws each side.
Connecting the monitor to headphones
and a microphone
Headphones and a microphone (both to be purchase
separately) can be connected here.
Note:
-
Do not overly bend the cable or add extension cords
as this could lead to malfunction.
Note:
-
DO only connect cables less than 3m to the LL-
T15S1.
-
When the headphones are connected, no sound can
be heard from the monitor speakers.
Connecting the monitor to a power source
Before connecting, first turn off the monitor's main
power switch.
Note:
-
Do not overly bend the cable or add extension cords
as this could lead to malfunction.
1. Connect the AC adapter to the monitor's power
terminal
   
2. Attach the power cord to the AC adapter and place
the power plug into the AC terminal.
   
Audio cable
Audio input
terminal
Microphone output
terminal
PC (Audio output
terminal)
PC (Microphone
terminal)
Microphone
terminal
Headphone
terminal
Microphone
Headphones
Power terminal
AC adapter
Power cord
Page of 113
Display

Click on the first or last page to see other LL-T15S1 (serv.man11) service manuals if exist.