Sharp UP-V5500 (serv.man18) Driver / Update ▷ View online
Valcretec POS Test User Guide
2
Setup
Setup_VctPOSTest_UPV5500_XXX.exe should be executed and installed in order
to install Valcretec POS Test.
Installation will be completed automatically with click
“Next”
[Figure 1] Valcretec POS Test Installation
Valcretec POS Test User Guide
3
Valcretec POS Test Start
Select [Start]
– [Program] – [Valcretec Post Test] – [Valcretec Post Test] in order.
[Figure 2] Valcretec POS Test Execution
Valcretec POS Test User Guide
4
System Information
When user executes Valcretec POS Test, the following window will be appeared.
[Figure 3] System Information
1. System configuration
The devices of system configuration and their drivers are displayed.
2. System information
The detailed information of the selected device in the system configuration
component is displayed. There are 3 tabs which are System Info, Driver Info, and
Device Info. The explanations of each tab are as follows.
-
System Info : This tab shows the information that can be checked in the
„System Properties‟ of Windows.
System Configuration
System Information
Valcretec POS Test User Guide
5
-
Driver Info : This tab shows Windows driver information applied to the
selected device in the system configuration.
-
Device Info : This tab shows the device information of the selected device
in the system configuration.
Click on the first or last page to see other UP-V5500 (serv.man18) service manuals if exist.