DOWNLOAD Sharp UP-3500 (serv.man33) Service Manual ↓ Size: 4.79 MB | Pages: 127 in PDF or view online for FREE

••••• Time-edit operations

A manager can edit employee’s time-in/out data to record his or her time correctly.

1) Select the “OPXZ” mode and touch the “EMPLOYEE” menu, then touch the “TIME EDIT” job.

The following window is displayed.

2) Enter the manager code and secret code, then touch the [ENTER] key or the [CONTINUE] key.

The following window is displayed to enter the employee code.

3) Enter the employee code and touch the [ENTER] key (or read the employee card). If you want to

select the employee from the list, touch the [LIST] key and select the employee.
Enter the date of editing the working time, then touch the [ENTER] key or the [CONTINUE] key.
The working time data window is displayed.

4) Select the line to edit the time, then enter a correct time and touch the [ENTER] key.

To finish the editing job, touch the [EXIT] key.

■

■

■

■

■  Employee’s working time shift

This function enables you to control the employees’ working time shifts. Working time shifts of a day are
divided into a maximum of nine.
You can also use this function to control CCD entries, forcing the employees to make those entries at this
operation (CCD per shift).

In case the shift 2 (MORNING02) is shifted to the shifts 3 (LUNCH).

6:00 - 9:00 :

MORNING01

(SHIFT1)

In this example, SHIFT7 to 9 are not used.

9:00 - 11:00 :

MORNING02

(SHIFT2)

Touch the [WORK_CHANGE] key to move the

11:00 - 14:00 :

LUNCH

(SHIFT3)

current shift to the next one.

14:00 - 16:00 :

AFTERNOON

(SHIFT4)

When the shift reaches the last one (SHIFT6 in

16:00 - 19:00 :

EVENING

(SHIFT5)

this example), it returns to the SHIFT1.

19:00 - 23:00 :

NIGHT

(SHIFT6)

• To use this function, the employee must assign their working time shift at the time-in operation.
• The employee can make operations only at the assigned working time shift.
• If you program the POS terminal to require a CCD entry at the working time shift operation, the CCD

entry window is displayed.

• You can also program the POS terminal to allow the employee to make a CCD entry anytime after the

working time shift operation. In this case, the message “CCD IS NOT DONE” appears to remind you to
complete the CCD entry if the employee makes a time-out operation without completing the CCD entry
when the woking time is shifted.

▼

■

■

■

■

■  Group discount entries

The terminal provides the percent calculation (discount/premium) for associated group.
Percentage: 0.01 to 100.00% (programmed rate)

••••• Display of the group discountable subtotal

➝

 [GR.DISC_SHIFT n] 

➝

 [SUBTOTAL]

••••• Group discount entry

(Display of the group discountable subtotal)

Group discount rate

When you use a programmed rate

••••• Group discount status shift

The terminal allows you to shift the programmed group discount status of each item by touching the
[GR.DISC_SHIFT n] key before (or after) item entries. After each entry is completed, the programmed
group discount status of each item is resumed.

➝

 [GR.DISC_SHIFT n] 

➝

 (Item entry)

■

■

■

■

■  Bonus points

Customers can get redeemable bonus points for their purchases. There are the following two types of
bonus points:

   • Bonus points to be given for purchasing specified PLU/EANs.

• Bonus points to be given for purchasing more than the specified amount.

For the former type, the number of bonus points to be given can be programmed in the PLU/EAN article
programming.
For the latter type, it can be programmed in the bonus point table.
In the bonus point table, you can also program the discount amount redeemable for the programmed
number of bonus points.

<Bonus point table>
   Amount1 (1.00)

➝

1 point

   Amount2 (2.00)

➝

2 points

   Amount3 (5.00)

➝

5 points

   Amount4 (10.00)

➝

10 points

      PLU code 1

➝

2 points

••••• Redemption of bonus points

Customers can redeem their accumulated bonus points for discounts.
Touch the [POINT_REDEMP] key at any time before payment operation.

Points (max. 7 digits)

[ OK ]  or  

Points (max. 7 digits)

Redeemed points:

10

Redeemed amount: 1.00

3 [ADD]

7 [ OK ]