DOWNLOAD Sharp POS UTILITY Service Manual ↓ Size: 1.94 MB | Pages: 42 in PDF or view online for FREE

36

exceeds the number the ECR is able to accept, then you will receive a
notification message.  Using this option sets the 'Modified Flag' on the PLU/EAN
Record OFF.

•

Modified PLU's and EAN's are those which have been edited since the last time
they were retrieved from the ECR or sent to the ECR.

•

Modified PLU's and EAN's are those which have been edited since the last time
they were retrieved from the ECR or sent to the ECR.  This operation will also set
the 'Modified Flag' on the PLU/EAN Record OFF.

•

This is the default option here.

•

Send all the Department information to the ECR.  The file in the ECR is deleted
first (and hence deletes and sales).  If you try to send more Departments than
the ECR has been configured to accept, then you will receive a message to the
effect.

•

Send ALL RAM Data.  Note that if you send All RAM Data belonging to an ECR
with a different Firmware (EPROM) Version can cause the target ECR to lock
up.  Selecting this option with deselect all other send options.  Conversely,
selecting other options will deselect this option.

•

Sends the  PCs date & time.

•

This data is not editable, and is sent back to the ECR the same as it was
Retrieved.

•

While you can't edit the UP-3300 Touch Screen Keyboard in 

, these files

are saved back to the database when data is retrieved from the ECR and an be

37

sent back using this option.

•

This option is only supported by the Starrtec Services TCP/IP Interface for 

ECR's.  With this interface fitted, programming for the 7000 Jobs can be sent to the
ECR.

•

This is a Communications Test to see if there is a valid ECR connected to the
computer and if it is available for Comms.  This test is performed before EVERY
Comms Session.  If no SEND or RETRIEVE options are selected, the test will be
performed on its own.  During this test the Progress Bar will be displayed to show
the result.

•

Clicking this button will ask you to Select a Register(ECR).  The Register Type
for the selected ECR is also displayed.  Once a register is selected you have a
choice to proceed with or cancel the pending Communications.

38

You cannot create Condiment Tables from scratch in 

.  You must create at least

one table in the ECR, then retrieve the data (including PLU's) which will include the table
you just created.  You may then edit this table and create or delete as required.  The PLU's
you use in the Condiment Table must exist in the ECR and 

.

To add to either Grid, press the INS(ert) key or using the mouse DoubleClick.  If you are
adding PLU's, a list of available PLU's will be displayed.  You can sort this list by clicking
on the column headings.  To add the currently highlighted PLU, DoubleClick on the row
with the mouse.

To delete from either Grid, press the DEL(ete) key.  You will be asked to confirm the
deletion.

The edit button allows you to edit the Table Description and Next Table Link.

39

This form is used by both the Condiment Table and PLU Menu Preset options for selecting
the PLU or Menu to add.  If this form has been activated by the adding to the Condiment
Table, only PLU's will be able to be selected.  If it was activated to add to the PLU Menus,
you have the choice of adding PLU's or Menus.

Sorting of the displayed data is done by clicking on the column headings.

To add the selected data, DoubleClick using the mouse.  The last item you added is
displayed.

You cannot create Menus from scratch in 

.  You must create at least one Menu

in the ECR, then retrieve the data (including PLU's) which will include the Menu you just
created.  You may then edit the Menu table and create or delete as required.  The PLU's
you use in the Menu must exist in the ECR and 

.

To add to either Grid, press the INS(ert) key or using the mouse DoubleClick.  If you are
adding PLU's or Menus, a list of available PLU's will be displayed.  There is an option on
the form to select Menus or PLU's.  You can sort this list by clicking on the column