Sharp XE-A217 (serv.man7) User Manual / Operation Manual ▷ View online
113
• Device configuration (PGM mode)
Report type
Setting
Item
Item
• Tax rate (PGM mode)
Report type
Tax no.
Tax no.
Rate
Lowest taxable amount
Lowest taxable amount
Tax system
114
• AUTO key (PGM mode)
Report type
Auto key text
Key operation
AUTO key no.
• ROM version (PGM mode)
Report type
115
SD CARD Mode
The register’s data can be saved to the SD memory card, and the programming data can be loaded from the
SD memory card.
To use the SD card function, select the “7 SD CARD MODE” in the mode selection window and perform the
following operations.
SD memory card.
To use the SD card function, select the “7 SD CARD MODE” in the mode selection window and perform the
following operations.
■
Inserting and removing an SD memory card
The SD card slot is located on the front side of your register.
Inserting an SD memory card
Insert an SD memory card into the SD card slot with the printed
SD logo facing upwards. Push the card in steady with a finger until
it clicks and release it slowly.
SD logo facing upwards. Push the card in steady with a finger until
it clicks and release it slowly.
Removing the SD memory card
Push in the card gently with a finger and release it. The card will
come out.
come out.
NOTE
• This model supports SD cards only. Use of any other types of SD cards such as mini SD, micro SD, etc.
with an adapter is not supported.
• When inserting or removing the SD memory card, be sure to release it slowly. Otherwise, the card may pop
out and injure your finger.
• Never touch or remove the SD memory card while it is accessed, otherwise the data stored in it may be
damaged.
• Formatting the SD memory card erases all the data in it.
CAUTION
Never turn the power off, while the SD memory card is accessed.
■
SD card formatting
When the SD card is not formatted yet, take the formatting operation.
Procedure
(1) Select “4 FORMATTING” in the SD CARD mode, the confirmation window is displayed.
(2) To perform the format operation, select OK and press the
(2) To perform the format operation, select OK and press the
A
key.
To cancel the operation, select CANCEL and press the
A
key.
■
Folder creating
The master folder can be created for the data file.
(¥ SHARP¥ ECRXXX11¥ nnnnnnnn¥ : nnnnnnnn/folder name)
(¥ SHARP¥ ECRXXX11¥ nnnnnnnn¥ : nnnnnnnn/folder name)
Procedure
(1) Select “3 FOLDER CONTROL” in the SD CARD mode and press the
A
key.
(2) Select “1 CREATE FOLDER”, the folder name entry window is displayed.
(3) Enter the required folder name and press the
(3) Enter the required folder name and press the
A
key.
To cancel the operation, press the
a
key.
116
■
Folder name selecting
Procedure
(1) Select “3 FOLDER CONTROL” in the SD CARD mode and press the
A
key, the FOLDER CONTROL
window is displayed.
(2) Select “2 SELECT FOLDER”, the folder name list window is displayed.
(3) Select the required folder name from the list, and press the
(3) Select the required folder name from the list, and press the
A
key.
To cancel the operation, press the
a
key.
■
Data saving
The sales data, EJ data or programming data can be saved to the SD card.
Procedure
(1) Select “1 SAVING” in the SD CARD mode, the selection window “SAVE” or “SAVE FOR ONLINE” is
displayed.
1. SAVE:
1. SAVE:
Saves data
2. SAVE FOR ONLINE: Saves and adds data to existing file and clears the data at the register
Select the operation “SAVE” or “SAVE FOR ONLINE” and press the
Select the operation “SAVE” or “SAVE FOR ONLINE” and press the
A
key; the following data list
window is displayed. (If you selected "SAVE FOR ONLINE", only "EJ DATA" is displayed.)
Text
Data list
SALES DATA
Sales data (CSV format)
EJ DATA
Electronic journal data
IND. PROGRAM
Select the individual programming data:
DEPARTMENT,
PLU,
GRAPHIC LOGO
LOGO TEXT
TAX
ALL PROGRAM
All programming data
ALL RAM DATA
All RAM data
(2) Select the data menu from the list and press the
A
key, the confirmation window is displayed.
To save the required data file, select OK and press the
A
key.
To cancel the operation, select CANCEL and press the
A
key.
Click on the first or last page to see other XE-A217 (serv.man7) service manuals if exist.