Sharp XE-A217 (serv.man7) User Manual / Operation Manual ▷ View online
97
■
Zero skip
You can program whether or not to skip “0” in each report.
Procedure
Program each item as follows:
• DEPARTMENT (Use the selective entry)
• DEPARTMENT (Use the selective entry)
SKIP:
Skips those data that are “0” in the department
report.
report.
NOT SKIP: Does not skip those data that are “0” in the
department report.
• TRANSACTION (Use the selective entry)
SKIP:
Skips those data that are “0” in the transaction
report.
report.
NOT SKIP: Does not skip those data that are “0” in the
transaction report.
• PLU (Use the selective entry)
SKIP:
Skips those data that are “0” in the PLU report.
NOT SKIP: Does not skip those data that are “0” in the PLU report.
• CLERK (Use the selective entry)
SKIP:
Skips those data that are “0” in the clerk report.
NOT SKIP: Does not skip those data that are “0” in the clerk report.
• HOURLY (Use the selective entry)
SKIP:
Skips those data that are “0” in the hourly report.
NOT SKIP: Does not skip those data that are “0” in the hourly report.
■
Print select
You can program whether or not to print the item on the report.
Procedure
Program each item as follows:
The screen continues.
• SEPARATOR LINE (Use the selective entry)
YES: Print the separate line on the report.
NO: Not to print the separate line on the report.
NO: Not to print the separate line on the report.
• Z COUNTER (Use the selective entry)
YES: Print the Z counter on the Z report.
NO: Not to print the Z counter on the Z report.
NO: Not to print the Z counter on the Z report.
• GT1 ON Z (Use the selective entry)
YES: Print GT1 on the Z report.
NO: Not to print GT1 on the Z report.
NO: Not to print GT1 on the Z report.
• GT2 ON Z (Use the selective entry)
YES: Print GT2 on the Z report.
NO: Not to print GT2 on the Z report.
NO: Not to print GT2 on the Z report.
• GT3 ON Z (Use the selective entry)
YES: Print GT3 on the Z report.
NO: Not to print GT3 on the Z report.
NO: Not to print GT3 on the Z report.
• BAL GT ON Z (Use the selective entry) for XE-A217W/XE-A217B only
YES: Print the balance GT on the Z report.
NO: Not to print the balance GT on the Z report.
NO: Not to print the balance GT on the Z report.
• TR GT ON Z (Use the selective entry)
YES: Print the training GT on the Z report.
NO: Not to print the training GT on the Z report.
NO: Not to print the training GT on the Z report.
98
• GT1 ON X (Use the selective entry)
YES: Print GT1 on the X report.
NO: Not to print GT1 on the X report.
NO: Not to print GT1 on the X report.
• GT2 ON X (Use the selective entry)
YES: Print GT2 on the X report.
NO: Not to print GT2 on the X report.
NO: Not to print GT2 on the X report.
• GT3 ON X (Use the selective entry)
YES: Print GT3 on the X report.
NO: Not to print GT3 on the X report.
NO: Not to print GT3 on the X report.
• TR GT ON X (Use the selective entry)
YES: Print the training GT on the X report.
NO: Not to print the training GT on the X report.
NO: Not to print the training GT on the X report.
• VD MODE ON X1Z1 (Use the selective entry)
YES: Print total of VOID MODE on X1Z1 report
NO: Not to print total of VOID MODE on X1Z1 report
NO: Not to print total of VOID MODE on X1Z1 report
• VD MODE ON X2Z2 (Use the selective entry)
YES: Print total of VOID MODE on X2Z2 report
NO: Not to print total of VOID MODE on X2Z2 report
NO: Not to print total of VOID MODE on X2Z2 report
• PLU DATA ON Z (Use the selective entry)
YES: Print PLU data on the PLU Z report.
NO: Not to print PLU data on the PLU Z report.
NO: Not to print PLU data on the PLU Z report.
• EJ DATA ON Z (Use the selective entry)
YES: Print EJ data on the EJ Z report.
NO: Not to print EJ data on the EJ Z report.
NO: Not to print EJ data on the EJ Z report.
• EJ SIZE (Use the selective entry)
SMALL: Print EJ in a small size.
NORMAL: Print EJ in a normal size.
NORMAL: Print EJ in a normal size.
■
Z Counter
Procedure
Program each item as follows:
• GENERAL Z1: Max.4 digits (0000 to 9999)
• GENERAL Z2: Max.4 digits (0000 to 9999)
• GENERAL Z1: Max.4 digits (0000 to 9999)
• GENERAL Z2: Max.4 digits (0000 to 9999)
99
■
Z1 General report
Procedure
Program each item as follows:
• SD: SAVE SALES (Use the selective entry)
• SD: SAVE SALES (Use the selective entry)
YES: Save the sales data in the SD card.
NO: Not to save the sales data in the SD card.
NO: Not to save the sales data in the SD card.
• SD: SAVE EJ (Use the selective entry)
YES: Save the electronic journal data in the SD card.
NO: Not to save the electronic journal data in the SD card.
NO: Not to save the electronic journal data in the SD card.
• SD: SAVE ALL RAM (Use the selective entry)
YES: Save all the RAM data in the SD card.
NO: Not to save all the RAM data in the SD card.
NO: Not to save all the RAM data in the SD card.
• CLEAR EJ (Use the selective entry)
YES: Clear the electronic journal data
NO: Not to clear the electronic journal data
NO: Not to clear the electronic journal data
• RESET BAL GT (Use the selective entry) for XE-A217W/XE-A217B only
YES: Reset the balance GT.
NO: Not to reset the balance GT.
NO: Not to reset the balance GT.
• RESET GT (Use the selective entry)
YES: Reset the GT.
NO: Not to reset the GT.
NO: Not to reset the GT.
■
Hourly report
You can program the memory type and the starting time for the hourly report.
Procedure
Program each item as follows:
• MEMORY TYPE (Use the selective entry)
• MEMORY TYPE (Use the selective entry)
30MIN: Selects the 30-minute type.
60MIN: Selects the 60-minute type.
60MIN: Selects the 60-minute type.
• START TIME (Use the numeric entry)
Starting time entry (max. 2 digits: 0 to 23)
■
Electronic Journal
Procedure
Program each item as follows:
• STORE TO SD (Use the selective entry)
• STORE TO SD (Use the selective entry)
When the EJ data is recorded on the SD card:
AS IS:
AS IS:
Control characters are recorded as they are
W SPACE: Control characters are recorded as double space.
• TR DATA STORE (Use the selective entry)
YES: Record the EJ data in the training mode.
NO: Not to record the EJ data in the training mode.
NO: Not to record the EJ data in the training mode.
• X DATA STORE (Use the selective entry)
When the X report data in the EJ is recorded:
HEADER: Record only the header of X report in the electronic journal.
DETAIL: Record the detail of X report in the electronic journal.
HEADER: Record only the header of X report in the electronic journal.
DETAIL: Record the detail of X report in the electronic journal.
100
Message Programming
Use the following procedure to select any option included in the message group:
Procedure
1.
In the SETTING window, select “10 MESSAGE.”
• The MESSAGE window will appear.
2.
Select any option from the following options list:
1
RECEIPT LOGO
Receipt logo
The following illustration shows those options included in this programming group.
10 MESSAGE
1 RECEIPT LOGO
l
See “Receipt logo” this page.
■
Receipt logo
Your register can print programmed messages for customers on every receipt.
The logo text is printed in a centering form on the receipt.
The logo text is printed in a centering form on the receipt.
Procedure
Program each item as follows:
• RECEIPT LOGO (Use the character entry)
• RECEIPT LOGO (Use the character entry)
Logo text for the receipt (max. 30 characters x 6 lines)
NOTE
The programmable number of lines for a message varies according to the following message
types:
types:
PATTERN 1: 3 line text header
PATTERN 2: Image logo header
PATTERN 3: Image logo header + 3 line text footer
PATTERN 4: 6 line text header
PATTERN 5: Image logo header + 3 line text header
PATTERN 6: 3 line text header + 3 line text footer
PATTERN 2: Image logo header
PATTERN 3: Image logo header + 3 line text footer
PATTERN 4: 6 line text header
PATTERN 5: Image logo header + 3 line text header
PATTERN 6: 3 line text header + 3 line text footer
Click on the first or last page to see other XE-A217 (serv.man7) service manuals if exist.