Sharp XE-A217 (serv.man7) User Manual / Operation Manual ▷ View online
101
Device Configuration Programming
Use the following procedure to select a device configuration programming:
Procedure
1.
In the SETTING window, select “11 DEVICE CONFIG.”
• The DEVICE CONFIG window will appear.
2.
Select any option from the following options list:
1 KEYBOARD
Keyboard
2 DISPLAY
Display
3 PRINTER
Printer
4 ONLINE
Online
The following illustration shows those options included in this programming group.
11 DEVICE CONFIG
1 KEYBOARD
l
See “Keyboard” on page 101.
2 DISPLAY
l
See “Display” on page 102.
3 PRINTER
l
See “Printer” on page 102.
4 ONLINE
l
See “Online” on page 102.
■
Keyboard
Procedure
Program each item as follows:
• BUFFERING (Use the selective entry)
• BUFFERING (Use the selective entry)
YES: Enables the buffering keyboard.
NO: Disables the buffering keyboard.
NO: Disables the buffering keyboard.
• TOUCH SOUND (Use the selective entry)
YES: Set to sound.
NO: Not to sound.
NO: Not to sound.
102
■
Display
Procedure
Program each item as follows:
• POWER SAVE (Use the numeric entry)
• POWER SAVE (Use the numeric entry)
Time of the power save (2 digits: 1 to 99 minutes,
0:100minutes).
0:100minutes).
• P. SAVE AT TM (Use the selective entry)
Power saving during time display:
YES: Enables power saving during time display.
NO: Disables power saving during time display.
YES: Enables power saving during time display.
NO: Disables power saving during time display.
■
Printer
Procedure
Program each item as follows:
• DENSITY (Use the numeric entry)
• DENSITY (Use the numeric entry)
Select a density level (2 digits: 00 to 99).
00: 89% for standard
50: 100% for standard
99: 111% for standard
00: 89% for standard
50: 100% for standard
99: 111% for standard
■
Online
Procedure
Program each item as follows:
The screen continues.
• TERMINAL No. (Use the numeric entry)
Terminal number (6 digits: 0 to 999999).
• CI SIGNAL (Use the selective entry)
Sensing of the CI signal
NON:
NON:
Disables sensing of the CI signal.
SENSING: Enables sensing of the CI signal.
• LINE FORM (Use the selective entry)
Programming of the modem control
FULL: Full duplex system.
HALF: Half duplex system.
FULL: Full duplex system.
HALF: Half duplex system.
• BAUD RATE (Use the selective entry)
Transmission data rate.
38400 bps 19200 bps
9600 bps
38400 bps 19200 bps
9600 bps
4800 bps
• START CODE (Use the numeric entry)
Start code (3 digits: 0 to 127)
• END CODE (Use the numeric entry)
End code (3 digits: 0 to 127)
• TIME OUT (Use the numeric entry)
Programming of the time-out time (3 digits: 1 to 255 sec.)
103
Tax Programming
Use the following procedure to select any option included in the tax group:
Procedure
1.
In the SETTING window, select “12 TAX.”
• The TAX window will appear.
2.
Select any option from the following options list:
1 TAX SYSTEM
Tax system
2 TAX1
Tax1
3 TAX2
Tax2
4 TAX3
Tax3
5 TAX4
Tax4
■
Tax system
Procedure
• Tax system (Use the selective entry)
AUTO TAX 1-4
AUTO VAT 1-4
MANUAL VAT 1-4
MANUAL VAT 1
MANUAL TAX 1-4
VAT1 & TAX 2-4
AUTO VAT 1-4
MANUAL VAT 1-4
MANUAL VAT 1
MANUAL TAX 1-4
VAT1 & TAX 2-4
■
Tax 1 through 4
Procedure
• TAX RATE (Use the numeric entry)
Tax rate (max. 7 digits: 0.0000 to 999.9999%)
• RATE SIGN (Use the selective entry)
+: Plus rate
–: Minus rate
• This option is not available in the VAT system.
–: Minus rate
• This option is not available in the VAT system.
• LOWER TAX (Use the numeric entry)
Lowest taxable amount (max. 5 digits: 0.00 to 999.99)
• This option is not available in the VAT system.
• This option is not available in the VAT system.
104
Automatic Sequencing Key Programming
If you program frequently performed key operations for the AUTO keys, you can enter those key operations
simply by pressing the corresponding AUTO keys in key operations.
simply by pressing the corresponding AUTO keys in key operations.
Procedure
■
Key Text
1.
In the SETTING window, select “13 AUTO KEY.”
• The AUTO KEY window will appear.
2.
Select “1 KEY TEXT” by the
A
key.
3.
Select the pertinent Auto key from the key list by the
A
key.
4.
Enter the title of the operation for the key sequence to
allocate.
TEXT: up to 12 digits
TEXT: up to 12 digits
Click on the first or last page to see other XE-A217 (serv.man7) service manuals if exist.