Sharp XE-A201 (serv.man8) User Manual / Operation Manual ▷ View online
67
The malfunctions shown in the left-hand column below, labelled “Fault,” do not necessarily indicate functional
faults of the machine. It is therefore advisable to refer to “Checking” shown in the right-hand column before
calling for service.
faults of the machine. It is therefore advisable to refer to “Checking” shown in the right-hand column before
calling for service.
Error code table
When the following error codes are displayed, press the
l
key and take a proper action according to the table
below.
Fault
Checking
The display won’t illuminate even when the mode switch
is turned to any other position than “ ”.
is turned to any other position than “ ”.
• Is power supplied to the electrical outlet?
• Is the power cord plug out or loosely connected to the
AC outlet?
• Is the power cord plug out or loosely connected to the
AC outlet?
(2)
The display shows symbols that do not make sense.
• Has the machine been initialized properly as shown in
“GETTING STARTED”?
(Note that initialization clears all the data and programmed
settings stored in memory.)
“GETTING STARTED”?
(Note that initialization clears all the data and programmed
settings stored in memory.)
(1)
The display is illuminated, but the whole machine
refuses registrations.
refuses registrations.
• Is a clerk code assigned to the register?
• Is the mode switch set properly at the “REG” position?
• Is the mode switch set properly at the “REG” position?
(3)
No receipt is issued.
• Is the paper roll properly installed?
• Is there a paper jam?
• Is the receipt function in the “OFF” status?
• Is the print head release lever at the printing position?
• Is there a paper jam?
• Is the receipt function in the “OFF” status?
• Is the print head release lever at the printing position?
(4)
No journal paper is taken up.
• Is the take-up spool installed on the bearing properly?
• Is there a paper jam?
• Is the journal printing selected in the printing style
programming? (If the receipt printing is selected, the paper
is not wound around the take-up spool.)
• Is there a paper jam?
• Is the journal printing selected in the printing style
programming? (If the receipt printing is selected, the paper
is not wound around the take-up spool.)
(5)
Printing is unusual.
• Is the print head release lever at the printing position?
• Is the paper roll properly installed?
• Is the paper roll properly installed?
(6)
Before Calling for Service
10
Error
Error status
Action
code
E01
Registration error
Make a correct key entry.
E02
Misoperation error
Make a correct key entry.
E03
Undefined code is entered.
Enter a correct code
E07
Memory is full (in the
a
key programming).
Program the
a
key within 25 steps.
E11
Compulsory depression of the
s
key for
Press the
s
key and continue the operation.
direct finalization
E12
Compulsory tendering
Make a tendering operation.
E32
No entry of a clerk code
Make a clerk code entry.
E34
Overflow limitation error
Make a registration within a limit of entry.
E35
The open price entry is inhibited.
Make a preset price entry.
E36
The preset price entry is inhibited.
Make an open price entry.
E37
The direct finalization is inhibited.
Make a tendering operation.
E67
Subtotal void is not allowed.
Finalize the transaction, and correct the wrong entries in the
mode.
A201_5 OPERATOR MAINTENANCE 01.11.11 10:24 AM Page 67
68
Use these labels with the department keys. Write department names on the labels and attach them to the
department keys by first removing the transparent key covers. (Please make a copy of this page.)
department keys by first removing the transparent key covers. (Please make a copy of this page.)
SPECIFICATIONS
Model:
XE-A201
Dimensions:
338 (W) x 425 (D) x 290 (H) mm
Weight:
9.0 kg
Power source:
Official (nominal) voltage and frequency
Power consumption:
Stand-by 7W
Operating 34.5W (max.)
Working temperature:
0 °C to 40 °C
Electronics:
LSI (CPU) etc.
Display:
Operator display:
7-segment display (10 positions)
Customer display:
7-segment display (7 positions)
Printer:
Type:
One-station thermal printer
Printing speed:
Approx. 10 lines/second
Printing capacity:
24 digits each for receipt and journal paper
Other functions:
• Logo message function
• Receipt (ON-OFF) function
Paper roll:
Width: 57.5 ± 0.5 mm
Max. diam.: 80 mm
Quality: High quality (0.06 to 0.08 mm thickness)
Cash drawer:
3 slots for bill and 7 for coin denominations
Accessories:
Manager key
2
Operator key
2
Drawer lock key
2
Paper roll
1
Take-up spool
1
Bill separator
1 (Set in the drawer.)
Quick Start Guide
1 copy
Instruction manual
1 copy
* Specifications and appearance subject to change without notice for improvement.
D
18
2
E
17
1
1
I
22
6
J
21
5
N
26
10
O
25
9
S
30
14
T
29
13
B
20
4
C
19
3
G
24
8
H
23
7
L
28
12
M
27
11
Q
32
16
R
31
15
E
17
Example:
Candy
Danish
A201_5 OPERATOR MAINTENANCE 01.11.11 10:24 AM Page 68
SHARP CORPORATION
Printed in Korea / Imprimé en Corée / Gedruckt in Korea / Impreso en Corea
T(TINSM2472BHZZ)
➀
SHARP CORPORATION
Printed in Korea / Imprimé en Corée / Gedruckt in Korea / Impreso en Corea
T(TINSM2472BHZZ)
➀
