DOWNLOAD Sharp XE-A107 (serv.man3) Service Manual ↓ Size: 6.8 MB | Pages: 36 in PDF or view online for FREE

Your machine allows you to print the programmed machine settings, namely, 
general & tax programming report and PLU programming report.
Set the mode switch to the Z/PGM position, and press 

u

 to print a general & 

tax programming report, or press 

p

 to print a PLU programming report.

u

p

PLU code
Sign and 

preset unit price

Associated 

department code

Department code
Sign and preset unit price

Sign and rate for 

%

Rate for 

V

Secret code
Miscellaneous programming(from the left, A to H)
Printing format programming (from the left, A to H)

EURO programming (from the left, A to H)
Australian rounding programming (for Australian tax system)

German VAT law programming (for German tax system)
VAT (tax) system
VAT rate

When a tax system is selected, 

lower tax limit for each tax is printed.

Tax rate
Lower tax limit

Date

Time

000017

Entry digit limit

Tax status(from the left, 

VAT(tax)4, 3, 2, 1; 0 for 

not taxable; 1 for taxable)

Normal (0)/SICS (1)

Receipt  number

■

Mode key

Develop the habit of locking the drawer when not using the register 
for any extended period of time.
To lock the drawer, use the mode key.
To.lock:  Insert the key into the drawer lock and turn it 90 degrees 

counter-clockwise.

To.unlock: Insert the key into the drawer lock and turn it 90 degrees 

clockwise.

■

1

Coin case

2

Lever

Lever

To detach the drawer, pull it forward fully, and while 
holding the lever down, lift the drawer slightly and 
remove.

■

Lever

In case of a power failure or if the machine is out of order, locate 
the lever at the bottom of the machine and move it in the direction 
of the arrow to open the drawer.  The drawer will not open if it is 
locked with the key.

■

You can enter bills and cheques from the slot without opening the drawer.  The bills and cheques 
entered are placed under the coin case. 
Caution:. ..When.taking.out.the.bills.and.cheques,.never.fail.to.hold.tightly.the.both.sides.of.

When a dye appears on the paper roll, it is time to replace the paper roll with new one.  Be sure to 
use the paper roll specified in “Specifications” section on page 32.

  Set the mode switch to the REG position.

  Remove the printer cover.

  Press 

F

 to advance the paper by several lines and then cut it 

to remove the take-up spool from the bearing.

  After cutting the existing paper, remove the paper roll.  

Then remove the remaining paper by pressing 

F

. 

  Make the straight part of the paper holding plate upward, and 

push it up in the direction of the arrow to remove it as shown 
in the second diagram.  Then remove the paper roll from the 
take-up spool.

  Install a new paper roll and replace the take-up spool 

according to the instructions on page 7.

This cash register displays a low battery symbol ( ) when the batteries installed get low, and 
displays a no battery symbol ( ) when batteries are extremely low or batteries are not installed.

When.the.low.battery.symbol.is.displayed, replace the batteries with new ones as soon as 

possible.  The existent batteries will be dead in about two days.
When.the.no.battery.symbol.is.displayed, replace the batteries immediately.  Otherwise, if the AC 

power cord is disconnected or a power failure occurs, all the programmed settings will be reset to 
the default settings and any data stored in memory will be cleared.

For replacing the batteries, be sure that the cash register is plugged in and the mode switch is on 
the REG position, then replace the batteries with new ones referring to “Installing Batteries” section 
on page 6.

When printing becomes faded, replace the existing ink roller with a new one available from SHARP.

Ink roller

• Be sure to use an ink roller available from 

SHARP. The use of any other ink rollers could 
cause troubles in the printer.  Never pour ink to 
the ink roller.

• After opening the parcel, install it soon.

  Remove the printer cover.

  Pull the ink roller handle upward to remove the ink roller.

  Install a new ink roller.

  Replace the printer cover.

If power is lost, the machine retains its memory contents and all information on sales entries when 
the batteries are in the proper state of charge.

• When power failure occurs in register idle state or during an entry, the machine returns to the 

normal state of operation after power recovery.

• When power failure occurs during a printing cycle, the register prints “············” and then carries out 

the correct printing procedure.

When.printer.motor.locks:
If the printer motor locks, nothing will operate.  First, unplug the AC adapter and repair paper jam.  
Then plug in the AC adapter, feed the roll paper to the proper position and press 

l

.  The register 

with then resume correct printing after printing  “············”.