Sharp XE-A107 (serv.man3) User Manual / Operation Manual ▷ View online
23
23
Advanced.Programming
Before starting programming, set the mode switch to the Z/PGM mode. Also
if necessary, enter the secret code and press
if necessary, enter the secret code and press
A
.
NOTE
• You can continue programming without printing the programming
report by not pressing
u
at the end of each program step.
However, you must program PLUs independent from other programming.
• Unless otherwise specified, programming options marked with * indicate factory setting. In
case of values or number settings, the factory settings are shown with the word, “Default”.
Department.Preset.Unit.Price.Programming
Unit prices can be assigned directly to department keys for frequently purchased items, which
enables you to enter the prices by simply pressing the department keys. (Default: 0.00)
enables you to enter the prices by simply pressing the department keys. (Default: 0.00)
For dept. 5 through 8
To program zero
To program another department
Dept. key
u
H
Unit price
(max. 5 digits)
PLU.Programming
The PLU function allow speedy key entries whereby a preset price is automatically called up when a
code is entered. Up to 80 PLU settings are possible. Each PLU should belong to a department in
order to acquire the parameters of the department. The cash register was factory preset so that
PLU1 to 10 are assigned to department 1 and unit price 0.00.
code is entered. Up to 80 PLU settings are possible. Each PLU should belong to a department in
order to acquire the parameters of the department. The cash register was factory preset so that
PLU1 to 10 are assigned to department 1 and unit price 0.00.
To program zero
PLU code
Unit price
(max. 6 digits)
(1 - 80)
To program the following PLU code
To program another PLU code
p
u
H
For dept. 5 through 8
Associated
Dept. key
To disable a PLU, enter the PLU code and press
p
, then press
v
and
u
.
24
24
Percent.Key.Programming
%
can be programmed as a discount key or premium key. As a default,
%
is programmed as a
discount key. Also you can program a percent rate for
%
.
When 00.00% is programmed, use of preset percent rate is prohibited. (factory setting)
Programming.the.percent.key.function.(discount.or.premium)
Programming.the.percent.key.function.(discount.or.premium)
Q
%
(
u
: to finish programming)
1
(for discount) /
0
(for premium)
Programming.the.percent.rate.(00.00.to.99.99%)
%
(
u
: to finish programming)
Percent rate in 4 digits
(00.00% to 99.99%) x 100
(00.00% to 99.99%) x 100
Example
15.5%:
1550
%
u
Exchange.Key.Programming
To handle a foreign currency, you can program a currency exchange rate (000.000000 to
999.999999) for the exchange key.
When 000.000000 is programmed, use of
When 000.000000 is programmed, use of
V
is prohibited (factory preset).
V
(
u
: to finish programming)
Currency exchange rate in 9 digits
(000.000000 to 999.999999) x 1000000
(000.000000 to 999.999999) x 1000000
Example
1.55022:.
1550220
V
u
Printing.Format.Programming
You can program a printing format of the receipt or journal by using the following eight kinds of parameters.
u
u
ABCDEFGH
(
u
: to finish programming)
2
Parameters:
Selection:
Entry:
A Currency symbol for domestic currency
Space*
0
EURO
1
B Printing receipt/journal in the REG mode
(Receipt ON/OFF function)
Yes (Receipt ON)*
0
No (Receipt OFF)
1
C Printing format
Journal format*
0
Receipt format
1
D Date printing
Yes*
0
No
1
E Time printing
Yes*
0
No
1
F Receipt number printing
Yes*
0
No
1
G Taxable subtotal printing
Yes*
0
No
1
H Subtotal printing with a press of
u
Yes
0
No*
1
.•.Printing.format
When receipt format is selected, the take-up spool does not move.
25
25
Miscellaneous.Programming
You can program miscellaneous settings suitable for use.
u
u
ABCDEFGH
(
u
: to finish programming)
1
Parameters:
Selection:
Entry:
A Date format
MMDDYY
0
DDMMYY*
1
YYMMDD
2
B Time format
12 hour format
0
24 hour format*
1
C Decimal point position for domestic currency
0 through 3
(Default: 2)
D Resetting receipt no. when issuing Z report No*
0
Yes
1
E Amount tendered compulsory for
A
and
C
No*
0
Yes
1
F Subtotaling compulsory
No*
0
Yes
1
G Entry digit limit for
c
,
C
,
U
and
T
0 through 8
(Default: 8)
H Rounding
Round off*
0
Round up
1
Round down
2
.•.Time.format
When 12 hour format is set, the a.m. time will be displayed with and printed without no mark,
and the p.m. time will be displayed with and printed with the mark @.
and the p.m. time will be displayed with and printed with the mark @.
Example
2:00.A.M../.2:00.P.M.
Operator.display
.
Receipt.print
.
2:00.A.M.
2:00.P.M.
.•.Amount.tendered.compulsory
When set for compulsory, always enter the amount tendered by the customer before finalizing the
transaction.
transaction.
.•.Subtotaling.compulsory
When set for compulsory, always press
u
before finalizing the transaction.
Consecutive.Receipt.Number.Programming
The receipt number is printed on every receipt or journal, and report, together with the date and
time. The number is incremented each time a receipt is issued. To start from a specific consecutive
number, enter a figure one less than that number. (Default: 0001)
time. The number is incremented each time a receipt is issued. To start from a specific consecutive
number, enter a figure one less than that number. (Default: 0001)
Q
u
Receipt start number (max. 4 digits)
(
u
: to finish programming)
26
26
EURO.Programming
For the details of EURO programming, please refer to “EURO Migration Function” on pages 21 and 22.
u
u
ABCDEFGH
(
u
: to finish programming)
3
Parameters:
Selection:
Entry:
A Automatic conversion of unit prices of Depts.
/PLUs by automatic EURO migration operation
No*
0
Yes
1
B Conversion rate printing
No*
0
Yes
1
C Exchange amount printing for total & change
No*
0
Yes
1
D Cheque & credit operation when tendering in
foreign currency
No*
0
Yes
1
E Exchange calculation method
Multiplication*
0
Division
1
F Rounding for exchange
Rounding up*
0
Rounding
1
G Currency symbol for foreign currency
Space*
0
EURO
1
H Decimal point position for foreign currency
0 through 3
(Default: 2)
NOTE
If you select “Yes” for exchange amount printing for total and change, you can display a change
in foreign currency by pressing
V
when the change is displayed in domestic currency.
Rounding.Programming.(For.Australian.tax.system)
When Australian rounding is set, the sales total amount is rounded to 0 or 5 when paid in cash.
u
u
0
for No or
1
for Yes
(
u
: to finish programming)
4
(Default: Yes for the register shipped to Australia)
Secret.Code.Programming
A secret code is used in order to allow only those who know the secret code to operate the machine in
and Z/PGM modes or to print Z reports. When you need a secret code, program a secret code.
Q
A
Secret code (max. 4 digits)
(
u
: to finish programming)
(Default: 0000; no application of secret code)
How.to.enter.a.secret.code:
In case that a secret code has been programmed, “----” is displayed when the mode switch is set to
In case that a secret code has been programmed, “----” is displayed when the mode switch is set to
or Z/PGM or when you need to issue a Z report. In this case, enter the secret code (max. 4
digits) and press
A
. Every time you enter a digit, the display of “-” changes to “_”.
In.case.you.forget.the.secret.code.you.programmed:
Set the mode switch to the Z/PGM position, and operate the secret code programming shown above
with the substitution of “0000” for the secret code.
with the substitution of “0000” for the secret code.
Click on the first or last page to see other XE-A107 (serv.man3) service manuals if exist.